I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

How It Works
Getting started is easy — just follow these simple steps
Choose your quantity
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
Select your delivery date
Select a delivery date you'd like for the product to be dropped off at your home
Sit back and wait
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!
Complete Your Outdoor Project
Most paver jobs in Greenlawn pair this sand with a compacted gravel base below and either paver edging or chip stone depending on the design. If you are mixing mortar for a stone wall near an older property, you will also want cement on hand before the load arrives. Pool base projects sometimes call for a geotextile fabric layer on top of the sand for stability.
Service area
Areas we deliver sand in Greenlawn, New York
For mortar work in this climate, keep the sand dry until you are ready to mix. Sandy loam ground in Greenlawn drains well but a rained-on pile still clumps and throws off your water ratio. Cover the pile with plastic sheeting between work sessions rather than tarping it loosely, a loose tarp lets moisture wick in from the edges and you will not notice until the mortar goes stiff on you.
A common mistake on paver jobs here is using this fine sand as bedding under the pavers instead of just in the joints. Bedding sand needs to be coarser and less uniform or it shifts and pumps out under freeze thaw cycles, which zone 7b sees plenty of. Save this grade for joint filling and mortar, and use a coarser material or chip stone for the base layer beneath the pavers themselves.
If you are doing both a paver patio and a mortared retaining wall on the same property, order the sand in one combined load rather than two separate deliveries. It is easier to stage one pile with a tarp divider than to schedule two trucks, and you avoid paying for a second delivery when the quantities would fit on one load anyway.
Working With Sand in Greenlawn
Greenlawn sits on sandy loam soil already, so this material is not fighting the native ground the way it might in heavier clay regions. That makes it a natural fit for hardscape work like patios and walkways near projects around John Gardiner Farm and similar older properties where pavers and stone walls are common. With a first frost around November 1 and last frost near April 3, most masonry and paver jobs get packed into a working season roughly April through October. Freeze thaw cycles in zone 7b winters make correct joint sand critical, loose or wrong grade sand will heave and gap by spring.
Masonry vs Fill Sand
Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.
Bedding and Leveling
For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.
Working With Moisture
Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.