• Greenwood MS Sand Delivery - Mulch Mound
  • Greenwood MS Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Ryan Cully
Ryan Cully
Google Review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

At a 1 inch depth, one cubic yard covers about 324 square feet, and at 2 inches that drops to roughly 162 square feet. Most paver joint and mortar mixing jobs use far less volume than a bedding or fill project, so measure your actual patio or wall area before ordering. Sand is sold and delivered by the cubic yard, so round up slightly rather than run short mid project.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Greenwood Sand Delivery

Greenwood Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Ryan Cully
Ryan Cully
Google Review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

At a 1 inch depth, one cubic yard covers about 324 square feet, and at 2 inches that drops to roughly 162 square feet. Most paver joint and mortar mixing jobs use far less volume than a bedding or fill project, so measure your actual patio or wall area before ordering. Sand is sold and delivered by the cubic yard, so round up slightly rather than run short mid project.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Greenwood Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review
Lindsay Mangan
Lindsay Mangan

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will de...

Read full review

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!

Google Review

Complete Your Outdoor Project

Mason sand pairs naturally with pavers, brick, and natural stone for patios, walkways, and mortar work. If you are setting pavers, many crews around here are moving to clean chip stone for the bedding layer since it does not pump the way sand can under repeated freeze thaw or heavy rain, so it is worth asking which base fits your design. For mortar mixing, pairing this sand with masonry cement rounds out the project.

Greenwood Soil Delivery
Greenwood Mulch Delivery
Map of the sand delivery area around Greenwood, Mississippi

Service area

Areas we deliver sand in Greenwood, Mississippi

See All Locations
Mulch Mound Pro Tip

Mason sand is finer and more uniform than concrete sand, which is exactly why it works for mortar but not for structural fill. If you are mixing mortar for brick repair on an older Greenwood home, keep the sand dry until mixing since Delta humidity can cause it to clump and throw off your water ratio. Store it under a tarp, not directly on wet ground, especially during the humid stretch from late spring through summer.

Mulch Mound Pro Tip

A common mistake is using mason sand as paver bedding and expecting it to stay put. It can migrate and pump over time, especially with our clay heavy Delta soils shifting seasonally. If you are building a paver patio meant to last, ask about clean chip stone for the base layer and save the mason sand for joint fill only.

Mulch Mound Pro Tip

Order mason sand and your masonry cement or paver joint sand needs together when you can, since combining deliveries saves a trip and keeps your project timeline tighter. Hardscape season here runs spring through fall, so ordering early in that window avoids the scheduling crunch that hits once everyone starts patio projects at once.

Working With Sand in Greenwood

Greenwood sits on silt loam, which holds moisture well but is not what you want under pavers or mixed into mortar. Mason sand gives masons and hardscapers a clean, uniform material that does not carry the fines and clay your native soil has. With the Yazoo River nearby and humidity that lingers through the hardscape season, a stable, well drained bedding layer matters more here than in drier climates. Local crews lean on this sand for mortar work on older brick homes and for joint fill on paver jobs downtown and along the residential streets off Grand Boulevard.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is mason sand actually used for on a home project in Greenwood?

Mason sand is used for mixing mortar, filling paver joints, and as a base for pool installations. It is washed and finely screened, which makes it more workable for mortar than coarser concrete sand. Most homeowners here use it for brick repair on older homes or for finishing a paver patio's joints.

Answer

How many cubic yards of sand do I need for my patio joints?

Joint fill uses much less material than a full bedding layer, often a fraction of a cubic yard for a typical patio. For reference, one cubic yard covers about 324 square feet at a 1 inch depth, so measure your patio area and scale down based on how thin your joint fill layer actually is.

Answer

When is the best time to schedule a mason sand delivery here?

Hardscape projects in Greenwood run heaviest from spring through fall, so scheduling early in that window avoids the busiest stretch. Humidity picks up in summer, so if you are mixing mortar, plan to use the sand fairly soon after delivery rather than letting it sit exposed for weeks.

Answer

Where will the sand be placed when it is delivered?

The load is placed at the driveway or curb location you choose at checkout, so make sure there is clear truck access to that spot. It helps to put down a tarp or plywood first if you want to keep the sand off direct pavement contact and easier to shovel later.

Answer

Should I use mason sand or chip stone under my pavers?

Mason sand still works for paver joints, but many local crews are shifting to clean chip stone for the bedding layer since it resists pumping and shifting better over time, particularly with our clay heavy silt loam soil. If your project is joint fill only, mason sand is the right call, but ask about chip stone for the base itself.

More delivery around Greenwood, Mississippi

All Greenwood, Mississippi landscape supply