• Huntersville NC Sand Delivery - Mulch Mound
  • Huntersville NC Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Michelle Cooper
Michelle Cooper
Google Review

We have always spread our own mulch for the past 24 years. This was our first time with the Mulch Mound - things I liked: they have online ordering and provide a digital receipt which means you can remember how much you ordered (I always forget for the next year!), they were o...

At a 1 inch depth, one cubic yard of mason sand covers about 324 square feet, and most mortar or bedding applications only need 1 to 2 inches. For a typical patio joint fill or mortar mixing job, figure your square footage, divide by 324, and round up. Most residential projects here run between half a yard and 2 yards depending on scope.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Huntersville Sand Delivery

Huntersville Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Michelle Cooper
Michelle Cooper
Google Review

We have always spread our own mulch for the past 24 years. This was our first time with the Mulch Mound - things I liked: they have online ordering and provide a digital receipt which means you can remember how much you ordered (I always forget for the next year!), they were o...

At a 1 inch depth, one cubic yard of mason sand covers about 324 square feet, and most mortar or bedding applications only need 1 to 2 inches. For a typical patio joint fill or mortar mixing job, figure your square footage, divide by 324, and round up. Most residential projects here run between half a yard and 2 yards depending on scope.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Huntersville Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Michelle Cooper
Michelle Cooper

We have always spread our own mulch for the past 24 years. This was our first time with the Mulch Mound - things I liked: they have online ordering...

Read full review

We have always spread our own mulch for the past 24 years. This was our first time with the Mulch Mound - things I liked: they have online ordering and provide a digital receipt which means you can remember how much you ordered (I always forget for the next year!), they were on time, they were able to deliver in 48 hours, they were generous with the portion (we got 9 yards and it felt like a FULL nine yards!), the driver was polite! We have ordered from reputable places, and there is always a little trash in the mulch. The mulch we recv'd from Mulch Mound had barely any... we were pleasant surprised!!! Color was great! Not to mention - the price was competitive and LOWER than other mulch places around. We will use again !! Highly recommend! Thanks Mulch Mound!

Google Review
Rob H
Rob H

Easy to order, great service, and great product. We enjoy the final look of a very neglected beds we inherited!

Google Review

Complete Your Outdoor Project

Mason sand pairs with paver base stone for patios and walkways, and with portland cement for anyone mixing mortar on site. If you are working near the lake and building a pool deck or surround, pairing sand with a compactable base gravel underneath gives a more stable result on Huntersville's clay subgrade.

Huntersville Soil Delivery
Huntersville Mulch Delivery
Map of the sand delivery area around Huntersville, North Carolina

Service area

Areas we deliver sand in Huntersville, North Carolina

See All Locations
Mulch Mound Pro Tip

Do not substitute mason sand for concrete sand or vice versa. Mason sand is finer and more uniform, which is exactly why it works for mortar, it holds water and blends smoothly with cement. But that same fineness makes it a poor structural base. If you are setting pavers, many Huntersville contractors have moved to clean chip stone under the pavers instead, since sand alone can shift and pump moisture up through red clay over time.

Mulch Mound Pro Tip

Order mason sand right before you plan to use it, not weeks ahead. Left uncovered through a Huntersville spring rain, it compacts and can develop a crust that is harder to work into mortar. If you have to store it more than a few days, tarp the pile and keep it off bare clay ground so it does not pick up staining or debris.

Mulch Mound Pro Tip

If your job only needs a small amount for mortar or joint filling, it is worth combining that order with a base material like paver stone in the same delivery rather than scheduling two separate trips. This is especially practical for lakefront properties around Huntersville where driveway access can be tight and you want to minimize truck trips across a finished lawn.

Working With Sand in Huntersville

Huntersville's native soil is red clay, which holds water and drains poorly, so it is not something masons want to mix mortar with or use as bedding under pavers near Lake Norman. Mason sand gives a clean, workable base that does not fight the clay underneath it. With hardscape season here running spring through fall and a frost window from late October to mid April, most sand orders line up with patio and paver jobs around Latta Plantation area properties and lakeside builds. It is also the go to for pool base work, which is common with the number of homes near the lake.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same as regular sand for my paver patio in Huntersville?

Not quite. Mason sand is finer and more uniform, made for mortar mixing and paver joint fill, not for structural bedding under the pavers themselves. For the base layer under pavers, most local contractors now use compactable chip stone instead of sand, since it holds up better against Huntersville's clay soil and does not shift or pump moisture over time.

Answer

How much mason sand do I need for a 300 square foot patio?

At a 1 inch depth, one cubic yard covers about 324 square feet, so a 300 square foot patio joint fill would need just under one cubic yard. If you are going 2 inches deep for a mortar bed or thicker joint fill, plan on close to two cubic yards to cover the same area.

Answer

When is the best time to install sand for a hardscape project here?

Spring through fall is peak hardscape season in Huntersville, and it lines up well with the frost free window from mid April to late October. Working outside that window means colder ground and slower mortar cure times, so most masons here schedule sand heavy jobs before the first frost in late October if possible.

Answer

Where will the sand be dropped off, and do I need to prepare anything?

We place the load at a flat, accessible spot near your work area, ideally somewhere a dump truck can reach without crossing soft lawn or landscaping. Clear that spot ahead of your scheduled delivery, which you choose at checkout, and let us know if your driveway or access road has any tight turns or low clearance.

Answer

Should I use mason sand or paver base stone under my patio pavers?

For the base layer, chip stone is generally the better call now, since it compacts firmly and does not pump moisture the way sand can, especially over Huntersville's clay subgrade. Mason sand still has its place for filling joints between pavers after they are set, or for mixing mortar if you are doing masonry work on the same job.

More delivery around Huntersville, North Carolina

All Huntersville, North Carolina landscape supply