About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Ordered Dirt. Received Dirt. Would Buy Again.

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most structural jobs run 6 to 12 inches depending on how much you are raising the grade. For a low spot or foundation backfill, measure the square footage and multiply by your target depth in feet to get cubic yards needed, then round up since compaction will settle the material a bit. Since it is sold by the cubic yard, ordering slightly more than the bare minimum saves a second delivery.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Jefferson Fill Dirt Delivery

Jefferson Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Ordered Dirt. Received Dirt. Would Buy Again.

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most structural jobs run 6 to 12 inches depending on how much you are raising the grade. For a low spot or foundation backfill, measure the square footage and multiply by your target depth in feet to get cubic yards needed, then round up since compaction will settle the material a bit. Since it is sold by the cubic yard, ordering slightly more than the bare minimum saves a second delivery.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Jefferson Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill jobs in Jefferson finish with a cap of topsoil once the fill is compacted, since fill dirt itself will not support grass or planting. If you're building up around a pool or foundation, a layer of gravel underneath for drainage can help keep the red clay subgrade from holding water against the fill. Mulch or sod comes after, once the topsoil layer is in place.

Mulch Mound Pro Tip

Jefferson's red clay does not compact the same way sandy fill does, so when you're building up a low spot, place your fill dirt in 6 to 8 inch lifts and compact each one before adding the next. Skipping this and dumping it all at once looks fine at first, but the ground keeps settling unevenly for a year or two afterward, especially with the freeze thaw cycles we get between our March and November frost dates.

Mulch Mound Pro Tip

The most common mistake we see is treating fill dirt like topsoil and trying to plant directly into it. Fill dirt is a structural subsoil, it lacks the organic content and nutrients grass or shrubs need, and it compacts too dense for root growth anyway. Always cap finished fill with several inches of real topsoil before seeding, sodding, or planting anything on top of it.

Mulch Mound Pro Tip

If your project involves both raising grade and improving drainage, like backfill around a pool deck, pair fill dirt with a base layer of gravel before you add the fill. This keeps water from pooling against the red clay subgrade underneath, which is a common issue given how slowly clay drains in this area. It costs a bit more upfront but avoids drainage headaches later.

Grading and Filling in Jefferson

Jefferson's red clay drains slowly and shifts with the wet winters and dry summer stretches typical of zone 8a, which is exactly why raw yard dirt is a poor substitute for clean fill on a real project. Homeowners near the Crawford W. Long Museum area and out toward the newer subdivisions both run into the same problem, low spots that hold water after storms and foundations that need buildup before grading. Fill dirt gives you a stable base that does not carry the organic material and debris that causes settling later. It is the material for the job itself, not something tied to a planting season.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Can I use fill dirt to level my backyard in Jefferson?

Yes, fill dirt is exactly what's used to raise low spots and level uneven ground. Place it in 6 to 8 inch lifts and compact each layer, since Jefferson's red clay base already drains slowly and uncompacted fill will settle unevenly over time. Cap with topsoil if you plan to seed or sod the area afterward.

Answer

How many cubic yards of fill dirt do I need for a small backyard low spot?

One cubic yard covers about 54 square feet at a 6 inch depth. For a 200 square foot low spot filled 6 inches deep, that's roughly 4 cubic yards. If you're going deeper, say 12 inches, plan on close to 8 cubic yards, and round up slightly since compaction will reduce the final depth.

Answer

When is the best time to bring in fill dirt in Jefferson?

Fill dirt work is driven by the project, not the season, so it can be done any time of year. That said, working when the red clay isn't saturated makes compaction easier and more effective, so avoiding the wettest stretches of winter between our November and March frost dates can save you effort on the compaction step.

Answer

Where will the delivery truck place the fill dirt on my property?

The truck delivers to the driveway or access point you specify at checkout. Make sure there's a clear path wide enough for a full size delivery truck, and let us know if there are gates, low branches, or soft ground that might limit access before delivery day.

Answer

Is fill dirt the same as topsoil for my project?

No, fill dirt is subsoil meant for structural jobs like raising grade or backfilling, it is screened of debris but not meant to grow anything in. If you plan to plant or seed the area, you'll want to cap the compacted fill dirt with a layer of topsoil once the grading is complete.

More delivery around Jefferson, Georgia

All Jefferson, Georgia landscape supply