• Junction City KS Sand Delivery - Mulch Mound
  • Junction City KS Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Bill Doege
Bill Doege
Google Review

At a 1 inch depth, one cubic yard covers roughly 324 square feet, so a small paver patio or pool base project might only need a fraction of a yard while a mortar mixing job for a stone wall could run through more depending on your ratio. Since it is sold by the cubic yard, figure your square footage and depth first, then order slightly over rather than short, since running out mid pour is worse than having a little extra on hand.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Junction City Sand Delivery

Junction City Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Bill Doege
Bill Doege
Google Review

At a 1 inch depth, one cubic yard covers roughly 324 square feet, so a small paver patio or pool base project might only need a fraction of a yard while a mortar mixing job for a stone wall could run through more depending on your ratio. Since it is sold by the cubic yard, figure your square footage and depth first, then order slightly over rather than short, since running out mid pour is worse than having a little extra on hand.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Junction City Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review

Complete Your Outdoor Project

Sand pairs naturally with chip stone for paver bases, since chip stone now handles the bedding role that sand used to do and resists pumping under freeze thaw stress. If you are doing masonry work, order your stone or block at the same time so mortar mixing does not stall. For pool bases, a layer of sand under a protective pad rounds out the setup.

Junction City Soil Delivery
Junction City Mulch Delivery
Map of the sand delivery area around Junction City, Kansas

Service area

Areas we deliver sand in Junction City, Kansas

See All Locations
Mulch Mound Pro Tip

For mortar mixing in Junction City's climate, keep your sand dry and covered before use, since silt loam ground holds moisture and a pile left on bare soil will wick water up fast. Wet sand throws off your mortar ratio and weakens the mix. A pallet or plastic sheeting under the pile for even a day or two before you mix makes a noticeable difference in workability.

Mulch Mound Pro Tip

A common mistake with mason sand is using it as paver bedding out of habit. It works, but it is prone to pumping moisture up through the joints during freeze thaw cycles, which is common here given the October to April frost window. Chip stone has mostly replaced it for that specific use because it does not hold water the same way. Save this sand for mortar and joint fill where its fine, uniform texture actually matters.

Mulch Mound Pro Tip

If your project needs both mortar sand and a bedding material, order them together to consolidate your delivery instead of scheduling two separate trips. It also helps to rough out your total yardage before ordering, since sand settles and compacts once it is piled, so a load that looks slightly short on delivery day usually still covers the job once it is spread and leveled.

Working With Sand in Junction City

Junction City sits on silt loam, which drains slowly and holds moisture longer than sandy ground, so a lot of hardscape and masonry work here uses sand as a controlled, predictable layer rather than relying on the native soil to behave. With freeze thaw cycles running from mid October to mid April, mortar and joint work tends to get scheduled tight around the growing season. This sand is finer and more uniform than concrete sand, which is exactly why it works better for mortar you need to trowel smoothly. It is less common now as paver bedding since chip stone has largely taken that job because it does not pump moisture up through joints.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is the difference between this sand and regular construction sand?

This is washed and finely screened sand, sometimes called mason sand, which is much more uniform in grain size than general concrete sand. That consistency is what makes it workable for mortar mixing and paver joint fill. Concrete sand is coarser and better suited to structural mixes where strength matters more than smoothness.

Answer

How much sand do I need for a small paver patio?

One cubic yard covers about 324 square feet at a 1 inch depth, which is typically enough for joint fill on a patio well over that size, since joints only take a thin layer. For a full bedding layer at 2 inches you would cover about half that area per yard, so measure your patio footprint and depth before ordering.

Answer

When is the best time to do mortar or paver work in Junction City?

Spring through fall is the practical window, roughly April through mid October, before the first frost. Working mortar in freezing temperatures weakens the cure, and Junction City's frost season runs from mid October to mid April, so most masonry and hardscape work gets scheduled well before the ground starts freezing.

Answer

Where will the sand be dropped on my property?

You designate the drop location, and our driver places the load there, so make sure there is clear access for a delivery truck. Delivery timing is scheduled at checkout, and it helps to have a tarp or marked area ready ahead of time to keep the pile contained and off grass or pavement you want to protect.

Answer

Should I use sand or chip stone for my paver base?

Chip stone has largely replaced sand as paver bedding because it does not pump moisture up through joints during freeze thaw cycles, which matters given our frost window here. Sand still makes sense for mortar mixing or joint fill, where its fine, uniform texture is actually an advantage rather than a liability.

More delivery around Junction City, Kansas

All Junction City, Kansas landscape supply