About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, and installs are typically run between 1 and 2 inches depending on the job. A paver joint fill or mortar mixing project usually needs less volume than a pool base or bedding layer, so measure the actual footprint and depth before ordering. Since it is sold by the cubic yard, rounding up slightly is cheaper than a second delivery mid project.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Lafayette Sand Delivery

Lafayette Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, and installs are typically run between 1 and 2 inches depending on the job. A paver joint fill or mortar mixing project usually needs less volume than a pool base or bedding layer, so measure the actual footprint and depth before ordering. Since it is sold by the cubic yard, rounding up slightly is cheaper than a second delivery mid project.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Lafayette Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Mason sand pairs with paver base stone below it and polymeric jointing sand above it on most patio and walkway builds. For pool installs, it is often ordered alongside a compactable base material to get a stable, level foundation. Mortar crews will usually want it delivered close to where mixing happens to cut down on wheelbarrow trips.

Mulch Mound Pro Tip

Mason sand is finer and more uniform than concrete sand, which is exactly why it works for mortar but not for structural fill. In Lafayette's humidity, keep it covered or on a well drained pad before use, since damp sand clumps and throws off your mortar mixing ratios. If it sits out during a wet spell, let it dry a day before mixing or you will fight inconsistent batches on site.

Mulch Mound Pro Tip

A common mistake on paver jobs here is using mason sand as bedding under the pavers themselves. It is fine for joint fill, but as a bedding layer it is increasingly replaced by clean chip stone, which locks in place and does not pump moisture up through the joints during Lafayette's heavy spring rains. Save mason sand for joints and mortar, and use a proper base material underneath.

Mulch Mound Pro Tip

If you are running both a pool project and a smaller patio job, order the mason sand in one combined delivery rather than two separate calls. Pool base work eats yardage fast, so a slightly oversized single order for both jobs usually costs less in trips than ordering twice as each project starts.

Working With Sand in Lafayette

Lafayette sits on silt loam at 40 feet of elevation, ground that holds water and does not drain the way sandy soil does further north. That makes mason sand useful here as a controlled base layer, whether it is bedding for a paver patio near Vermilionville or a leveling course under a pool. With a short winter and a long build season running spring through fall, most Hub City crews are working sand into hardscape jobs well before summer heat sets in. It does not amend the silt loam itself, it works alongside it as a purpose built layer.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same as what people here call sand for mortar mixing?

Yes, mason sand is the standard term for the washed, finely screened sand used in mortar and paver joint work around Lafayette. Some crews just call it mortar sand, but it is the same product, finer and more uniform than concrete sand, which is what makes it workable for mixing.

Answer

How many cubic yards do I need for a pool base in a typical Lafayette backyard?

It depends on your pool footprint and planned depth, but as a starting point, one cubic yard covers about 324 square feet at 1 inch. For a 15 by 30 foot pool base at 1.5 inches, you would need roughly 2 cubic yards. Measure your actual footprint before finalizing your order.

Answer

When is the best time of year to schedule sand delivery for a hardscape project?

Spring through fall is when most hardscape and pool work happens here, since the ground is workable and rain windows are more predictable than deep winter. With first frost around December 3 and last frost around February 15, Lafayette's building season is long, but scheduling before peak summer humidity avoids the worst working conditions.

Answer

Where will the sand be placed on delivery day, and what should I prepare?

The load is placed at the driveway, curb, or specific spot you note at checkout, so make sure there is clear access for a delivery truck beforehand. Delivery timing is scheduled at checkout, and having a tarp or marked drop zone ready helps avoid staining a driveway or blocking a walkway.

Answer

Should I use mason sand or chip stone as bedding under my pavers?

For paver bedding, many Lafayette crews are shifting to clean chip stone instead of mason sand, since chip stone locks in place and does not pump moisture during heavy rain the way sand can. Mason sand still works well for joint fill and mortar mixing, so the right choice depends on which part of the job you are doing.

More delivery around Lafayette, Louisiana

All Lafayette, Louisiana landscape supply