• Las Cruces NM Sand Delivery - Mulch Mound
  • Las Cruces NM Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Ryan Cully
Ryan Cully
Google Review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

At a 1 inch depth, one cubic yard covers about 324 square feet, so a small paver patio or a few pallets of block work rarely needs more than a yard or two. Pool base prep and larger paver jobs usually call for a full 2 inch layer, which cuts that coverage roughly in half, so plan closer to 160 to 170 square feet per yard at that depth. Mortar mixing is a different calculation entirely and depends on your mix ratio, so order a bit extra rather than running short mid pour.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Las Cruces Sand Delivery

Las Cruces Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Ryan Cully
Ryan Cully
Google Review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

At a 1 inch depth, one cubic yard covers about 324 square feet, so a small paver patio or a few pallets of block work rarely needs more than a yard or two. Pool base prep and larger paver jobs usually call for a full 2 inch layer, which cuts that coverage roughly in half, so plan closer to 160 to 170 square feet per yard at that depth. Mortar mixing is a different calculation entirely and depends on your mix ratio, so order a bit extra rather than running short mid pour.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Las Cruces Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review
Lindsay Mangan
Lindsay Mangan

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will de...

Read full review

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!

Google Review

Complete Your Outdoor Project

Mason sand pairs naturally with paver base gravel underneath and polymeric sand or chip stone on top, depending on whether you are bedding pavers the traditional way or using the newer chip stone approach. If you are pouring block or brick, you will also want portland cement on hand before the load arrives. For pool decking, a compacted gravel base under the sand layer keeps things stable through our freeze thaw swings each winter.

Las Cruces Soil Delivery
Las Cruces Mulch Delivery
Map of the sand delivery area around Las Cruces, New Mexico

Service area

Areas we deliver sand in Las Cruces, New Mexico

See All Locations
Mulch Mound Pro Tip

In Las Cruces, mortar mixed with mason sand sets noticeably faster once temperatures push past 90 degrees, which happens often outside of our short spring and fall windows. Mix in smaller batches during summer builds so you are not fighting stiffening mortar before it is placed. Early morning pours, before the heat sets in around midday, give you more working time and a stronger bond in block and brick joints.

Mulch Mound Pro Tip

A common mistake here is using mason sand as paver bedding out of habit, when clean chip stone has largely replaced it for that specific use because sand pumps and shifts under joint pressure over time, especially with our seasonal ground movement from freeze thaw cycles near the low 30s at night in winter. Save mason sand for mortar, joints, and pool bases, and ask about chip stone for the actual bedding layer under pavers.

Mulch Mound Pro Tip

Because mason sand is washed and screened finer than concrete sand, it costs more per yard, so do not over order for jobs where a coarser material would do. If you are also doing paver bedding or backfill on the same project, ordering concrete sand or base material separately for those parts and reserving mason sand only for mortar and joints keeps your overall material cost down.

Working With Sand in Las Cruces

Las Cruces sits on sandy loam at nearly 4,000 feet, so native soil already drains fast, but it is not clean or graded enough for mortar work or paver joints. Contractors building around the Organ Mountains foothills and in the newer developments south of downtown reach for washed mason sand specifically because native fill has too much silt and rock fine content for consistent mortar strength. With hardscape season running spring through fall here, before the summer heat makes mortar set too fast, timing your sand delivery to match your build schedule matters more than in milder climates.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same thing as regular sand from a yard here in Las Cruces?

No. Mason sand is washed and finely screened specifically for mortar workability, unlike native sandy loam or general fill sand, which contains more silt and inconsistent grain size. It is not a substitute for playground sand or fill material, it is built for mortar mixing, paver joints, and pool base work where consistency matters.

Answer

How many cubic yards do I need for a small paver patio?

At a 1 inch bedding depth, one cubic yard covers about 324 square feet, so a 300 square foot patio needs roughly one yard. If you are going to a 2 inch depth for extra stability, plan on closer to 160 to 170 square feet per yard instead, so order accordingly based on your actual depth.

Answer

When is the best time of year to schedule a hardscape or mortar project here?

Spring through fall is peak hardscape season in Las Cruces, and mortar work goes easier in the cooler shoulder months since high summer heat can make mortar set too quickly to work with. Scheduling around early morning pours in summer, or targeting spring and fall altogether, gives you more control over the finished result.

Answer

Where will the sand be placed when it is delivered?

The load is dropped at the driveway, curb, or spot you specify during checkout, so make sure that area is clear and accessible before your delivery date. If your project site is further back on the property, like near a backyard build with mountain views, plan for extra time moving material by wheelbarrow.

Answer

Should I use mason sand or chip stone for paver bedding?

Many contractors have moved to chip stone for paver bedding because it does not pump or shift under joint pressure the way sand can over time. Mason sand still makes sense for mortar mixing, paver joint filling, and pool base prep, so the right choice depends on which part of your project you are working on.

More delivery around Las Cruces, New Mexico

All Las Cruces, New Mexico landscape supply