About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Great service. We ordered topsoil from Mulch Mound and the best experience. Thank you so much!

One cubic yard covers roughly 324 square feet at a 1 inch depth, and most mortar or joint work only calls for that 1 to 2 inch range, so a single yard often handles a good sized patio or walkway project. If you are filling paver joints across a larger patio, figure closer to the 2 inch side and order accordingly. We sell strictly by the cubic yard, so measure your square footage first and work backward from there.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Laurinburg Sand Delivery

Laurinburg Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Great service. We ordered topsoil from Mulch Mound and the best experience. Thank you so much!

One cubic yard covers roughly 324 square feet at a 1 inch depth, and most mortar or joint work only calls for that 1 to 2 inch range, so a single yard often handles a good sized patio or walkway project. If you are filling paver joints across a larger patio, figure closer to the 2 inch side and order accordingly. We sell strictly by the cubic yard, so measure your square footage first and work backward from there.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Laurinburg Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most hardscape jobs around Laurinburg pair this sand with paver base stone or clean chip stone underneath, since chip stone has become the more common bedding layer that will not pump or wash out like older sand beds did. If you are mixing mortar, you will also want cement and lime on hand before the load arrives. Pool installers often order this alongside crushed stone for drainage beneath the base.

Map of the sand delivery area around Laurinburg, North Carolina

Service area

Areas we deliver sand in Laurinburg, North Carolina

Mulch Mound Pro Tip

Mason sand's fine, uniform grain is exactly what makes mortar workable, but that same fineness means it holds water differently than concrete sand. In Laurinburg's humid summers, keep bagged sand or a tarped pile covered between mixing sessions, otherwise it clumps and throws off your water ratio. A slightly damp pile actually mixes more consistently than one that dried out overnight in direct sun.

Mulch Mound Pro Tip

A common mistake we see locally is using mason sand as paver bedding under a patio. It compacts fine at first, but over a rainy Carolina season it can migrate and pump up through the joints, leaving uneven pavers. Clean chip stone has replaced it for bedding in most modern installs, save the mason sand for joint filling and mortar work where its fine texture actually helps.

Mulch Mound Pro Tip

If you are running both a mortar batch and joint filling on the same job, order the full quantity at once rather than in two trips, since sand settles and compacts differently once it has sat a few days versus fresh off the truck. One load also means one delivery, which keeps a tighter driveway like many in older Laurinburg neighborhoods from getting blocked twice.

Working With Sand in Laurinburg

Laurinburg sits on sandy loam already, so this material is not fighting your native soil, it is finishing a job your soil started. Most calls we get here are for mortar mixing on brick homes near downtown and paver joint work on patios going in through the warmer months. With Zone 8a summers running long and hot, mason work often stalls in the heat of July and August, so a lot of buyers stage material in spring or early fall when mortar sets up without flash drying. Pool base leveling is another steady use, especially on newer builds outside the historic district.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same thing as regular sand from the hardware store?

Not quite. Mason sand is washed and finely screened to a much more uniform grain than the bagged all purpose sand at most stores. That consistency is what makes mortar workable and keeps paver joints from binding unevenly, which matters more once you are working in Laurinburg's summer heat and humidity.

Answer

How many cubic yards do I need for a patio's worth of paver joints?

One cubic yard covers about 324 square feet at a 1 inch depth, and joint filling rarely needs more than that. Measure your patio's total square footage, and unless it is unusually large, a single yard typically covers the joint work with some left over for touch ups.

Answer

What time of year should I schedule hardscape work in Laurinburg?

Spring through fall is when most hardscape projects happen here, and mortar work goes smoother outside the peak heat of July and August when material can dry too fast. With our last frost around March 20 and first frost around November 1, you have a solid window, just avoid extreme heat days for mortar mixing.

Answer

Where will the sand be placed on delivery day?

Our driver drops the load wherever you specify, usually the driveway or the closest safe spot to your work area. Clear space roughly the size of a small car and check that gate widths or low tree limbs near your property will not block the truck.

Answer

Should I use mason sand or chip stone for my paver base?

For bedding under pavers, clean chip stone is now the more common choice since it does not pump or shift the way sand can after repeated rain. Mason sand is still the right call for filling the joints between pavers once they are set, and for any mortar mixing on the same job.

More delivery around Laurinburg, North Carolina

All Laurinburg, North Carolina landscape supply