• Marysville WA Sand Delivery - Mulch Mound
  • Marysville WA Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Ryan Cully
Ryan Cully
Google Review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, and most jobs here call for 1 to 2 inches depending on whether you are bedding pavers or mixing mortar. For a typical 200 square foot patio joint fill or bedding layer, plan on roughly two thirds of a yard, and round up rather than short the job halfway through a Saturday.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Marysville Sand Delivery

Marysville Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Ryan Cully
Ryan Cully
Google Review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, and most jobs here call for 1 to 2 inches depending on whether you are bedding pavers or mixing mortar. For a typical 200 square foot patio joint fill or bedding layer, plan on roughly two thirds of a yard, and round up rather than short the job halfway through a Saturday.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Marysville Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review
Lindsay Mangan
Lindsay Mangan

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will de...

Read full review

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!

Google Review

Complete Your Outdoor Project

Most sand orders here go out alongside crushed rock or paver base for the compacted sub layer, with the sand as the final leveling course underneath the pavers. If you are mixing mortar for a block or brick project, cement is the obvious pairing. Some crews are switching to clean chip stone for paver joints since it will not pump out like sand can under Marysville's wet winters.

Marysville Soil Delivery
Marysville Mulch Delivery
Map of the sand delivery area around Marysville, Washington

Service area

Areas we deliver sand in Marysville, Washington

See All Locations
Mulch Mound Pro Tip

Mason sand for paver joints should be bone dry when you sweep it in, damp sand clumps and will not settle fully between the joints, leaving gaps that widen over time. In Marysville's damp shoulder seasons, spring and fall, plan joint sanding for a stretch of a few dry days, and store extra sand under cover rather than leaving the pile exposed to rain overnight before you use it.

Mulch Mound Pro Tip

A common mistake on wet coastal ground like ours is skipping compaction under the sand bed. Silt loam shifts more than sandy soil, so compact your base layer in lifts before adding the leveling sand, otherwise you will see settling and uneven pavers within a year or two, especially where downspouts drain nearby.

Mulch Mound Pro Tip

If your project is purely paver joints rather than a full bedding layer, some contractors around here are moving to polymeric sand or chip stone instead, since straight mason sand can wash out under heavy slough area rainfall. Ordering a slightly larger quantity of mason sand for both bedding and joints in one delivery is usually simpler than splitting materials across two orders.

Working With Sand in Marysville

Marysville sits on silt loam at low elevation near Ebey Slough, ground that holds moisture and does not drain the way sand does. That is exactly why builders bring in mason sand for anything structural, mortar beds, paver joints, pool surrounds, rather than trusting native soil to stay stable. With growing zone 8b winters bringing steady rain, a properly laid sand base keeps water moving instead of pooling under your hardscape. It is a small layer that does a lot of the work holding a patio or walkway together.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is mason sand actually used for on a typical Marysville project?

It is used for mortar mixing, paver bedding, paver joint fill, and pool base preparation. It is washed and finely screened, which makes it more workable than concrete sand for mortar, and smooth enough to sweep evenly into paver joints without leaving lumps.

Answer

How many cubic yards of sand do I need for a paver patio?

One cubic yard covers about 324 square feet at a 1 inch depth. Most paver beds run 1 to 2 inches, so a 300 square foot patio typically needs a little under a full yard for bedding, plus a smaller amount for joint fill on top.

Answer

When is the best time to install sand for a patio project here?

Spring through fall is peak hardscape season in Marysville, and dry stretches matter most since damp sand does not sweep or compact evenly. Avoid installing joint sand right before a forecasted rain, and give the base a day or two to settle before laying pavers on top.

Answer

Where will the sand be dropped on my property?

The truck places the load wherever you mark ahead of time, usually a driveway apron or a spot along the curb close to the work area. Clear the space and put down a tarp or plywood beforehand if you want to protect concrete, grass, or gravel underneath the pile.

Answer

Should I use mason sand or chip stone for my paver joints?

Mason sand is the traditional choice and still works well for bedding and mortar, but some Marysville contractors now use chip stone for joints because it will not pump or wash out under our wet winters. If you are doing bedding and joints in one project, mason sand for the base and chip stone for the joints is a common combination.

More delivery around Marysville, Washington

All Marysville, Washington landscape supply