About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Great service. We ordered topsoil from Mulch Mound and the best experience. Thank you so much!

One cubic yard of sand covers about 324 square feet at a 1 inch depth, and most bedding or joint work only calls for 1 to 2 inches, so a single yard handles a mid size patio or walkway project without much left over. For a full pool base or a large mortar mixing job, figure your square footage first, then decide if you are closer to 1 inch or 2 inches deep before ordering. Most residential jobs in Menomonee Falls fall in the 1 to 3 yard range.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

A ton is approximately 2,000 pounds. Coverage varies by stone type and depth, but as a general guideline, one ton covers roughly 80-100 square feet at 2 inches deep.

Menomonee Falls Sand Delivery

Menomonee Falls Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Great service. We ordered topsoil from Mulch Mound and the best experience. Thank you so much!

One cubic yard of sand covers about 324 square feet at a 1 inch depth, and most bedding or joint work only calls for 1 to 2 inches, so a single yard handles a mid size patio or walkway project without much left over. For a full pool base or a large mortar mixing job, figure your square footage first, then decide if you are closer to 1 inch or 2 inches deep before ordering. Most residential jobs in Menomonee Falls fall in the 1 to 3 yard range.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

A ton is approximately 2,000 pounds. Coverage varies by stone type and depth, but as a general guideline, one ton covers roughly 80-100 square feet at 2 inches deep.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Menomonee Falls Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Sand pairs naturally with paver base or crushed gravel underneath it, and with jointing sand or polymeric sand on top once the pavers are set. For pool decks and mortar work, having both sand and the right stone base on hand at once saves a second delivery trip. Many customers ordering sand for hardscaping also order chip stone, which is increasingly used as bedding instead of sand since it does not pump or shift under freeze thaw cycles.

Mulch Mound Pro Tip

For paver bedding on Menomonee Falls clay, screed your sand layer no deeper than 1 inch and compact the base beneath it thoroughly first, since clay subgrades shift more with freeze thaw cycles than sandy soils do. If you are seeing pavers settle unevenly after a winter, it is almost always a base compaction issue underneath the sand, not the sand itself. Chip stone bedding is worth considering if you want a layer that resists pumping.

Mulch Mound Pro Tip

Mortar sand needs to stay dry until you are ready to mix, so store it under a tarp, not directly on wet ground, especially during Wisconsin's wetter spring stretch between the last frost in early May and early summer. Wet clumped sand throws off your mortar ratios and weakens the mix. Keep it covered and check moisture before batching, particularly if a delivery sits for more than a few days.

Mulch Mound Pro Tip

If your project includes both bedding sand and jointing sand, order them together to save a delivery trip, and consider chip stone for bedding if long term joint stability matters more to you than upfront cost, since it holds up better than sand under freeze thaw movement common at this elevation and zone 5b climate.

Working With Sand in Menomonee Falls

Menomonee Falls sits on clay soil, which means drainage is already a fight on most lots, and sand is often brought in to correct that around patios, walkways, and pool decks rather than for the lawn itself. Hardscape projects here run spring through fall, with a lot of homeowners near Old Falls Village tackling paver patios and retaining walls once the ground firms up after the spring thaw. Mason sand also gets used heavily for mortar mixing on brick and block work, which is common on the older homes around the village core. Because the clay base underneath is unforgiving, a clean sand layer between base and pavers matters more here than in sandier regions.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same as the sand used for paver joints in Menomonee Falls?

It can be, since washed screened sand works for both mortar and joints, but many local installers now use chip stone for paver bedding instead because it resists pumping better in clay soil conditions. For mortar mixing, this fine washed sand is still the standard choice.

Answer

How much sand do I need for a 400 square foot patio?

At a 1 inch bedding depth, one cubic yard covers about 324 square feet, so a 400 square foot patio needs roughly 1.25 cubic yards. Most people round up to a full 1.5 yards to account for screeding waste and an uneven subgrade.

Answer

When should I schedule sand delivery for a spring paver project?

Hardscape season in Menomonee Falls really opens up after the last frost around May 3, once the ground has thawed and dried enough to compact properly. Ordering in late April for a May start is common, but delivery timing is set at checkout based on your actual schedule.

Answer

Can the delivery truck get sand close to my backyard patio area?

Trucks place material at the driveway or nearest accessible point on your property, they cannot drive across lawns or through gates. If your project is in the backyard, plan on moving the sand by wheelbarrow, and clear a path wide enough beforehand to make that easier.

Answer

Should I use sand or chip stone under my pavers?

Sand has been the traditional choice for paver bedding, but chip stone is increasingly used instead because it does not pump up through joints the way sand can under freeze thaw stress, which matters given our clay soil and winter cycles. Sand is still the right call for mortar mixing and pool base work.

More delivery around Menomonee Falls, Wisconsin

All Menomonee Falls, Wisconsin landscape supply