• Midland MI Sand Delivery - Mulch Mound
  • Midland MI Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Brachie Zehnwirth
Brachie Zehnwirth
Google Review

I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

At a 1 inch depth, one cubic yard covers about 324 square feet, so a 300 square foot patio joint fill or bedding layer at that depth needs roughly one yard. For deeper applications like pool base prep at 2 inches, plan on closer to two yards per 300 square feet. Sand weighs about 1.35 tons per cubic yard, so factor that into where you want the pile dropped.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Midland Sand Delivery

Midland Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Brachie Zehnwirth
Brachie Zehnwirth
Google Review

I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

At a 1 inch depth, one cubic yard covers about 324 square feet, so a 300 square foot patio joint fill or bedding layer at that depth needs roughly one yard. For deeper applications like pool base prep at 2 inches, plan on closer to two yards per 300 square feet. Sand weighs about 1.35 tons per cubic yard, so factor that into where you want the pile dropped.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Midland Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Hannah
Hannah

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

Google Review

Complete Your Outdoor Project

Most sand orders in Midland go out alongside pavers or clean chip stone, since bedding practices have shifted toward stone that will not pump water back up through the joints over time. If you are mixing mortar for brick or block work near the river, cement and a mixing tub round out the load. For pool installs, a compactable base material under the sand layer helps it hold shape through freeze thaw cycles.

Midland Soil Delivery
Midland Mulch Delivery
Map of the sand delivery area around Midland, Michigan

Service area

Areas we deliver sand in Midland, Michigan

See All Locations
Mulch Mound Pro Tip

Mason sand for mortar mixing needs to stay dry until you are ready to use it, which matters in Midland's humid summers when a tarp-free pile can pick up enough moisture to throw off your mix ratio. Cover the pile if it will sit more than a day or two before use, and keep it off bare clay soil so it does not pick up silt that weakens the bond.

Mulch Mound Pro Tip

A common mistake on paver projects here is using sand alone as bedding under the pavers. Many installers have moved to clean chip stone for the bedding layer because it will not pump up through the joints during Michigan's freeze thaw cycles the way sand can. Save the sand for the joint fill on top, where its fine, uniform grain actually helps lock pavers in place.

Mulch Mound Pro Tip

If your project needs both mortar sand and joint fill sand, order them as one delivery rather than splitting trips, since the density is the same 1.35 tons per yard either way and combining loads cuts down on truck trips across a soft spring yard. Pair the order with your paver or brick delivery so everything lands the same week and the project does not stall waiting on one material.

Working With Sand in Midland

Midland sits on silty clay loam, which holds water and drains slowly, so anything set directly on native soil tends to shift or heave over a Michigan winter. Sand gives hardscape projects a clean, workable layer that does not carry the clay's swelling behavior. With Midland's frost line reaching well below the surface between October and May, a proper sand base under pavers or a pool matters more here than in milder climates. Most of the calls we get are for mortar mixing on Tridge-area brick work and paver joint fill on new patios going in before the ground freezes.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand or paver sand?

Yes, what we deliver is washed and finely screened natural sand, sometimes called mason sand in other regions. It is finer and more uniform than concrete sand, which is what makes it workable for mortar and tight for paver joint fill.

Answer

How many yards do I need for a paver patio joint fill?

At a 1 inch depth, one cubic yard covers about 324 square feet, so most patio joint fill jobs under 300 square feet need one yard. If your joints are wide or your patio is larger, order closer to a yard and a half to be safe.

Answer

When is the best time to schedule a sand delivery in Midland?

Spring through fall is when hardscape work happens here, once the ground has thawed past the frost line, generally after mid May. Ordering early in that window gives you the most flexibility before contractor schedules and driveway access get tight later in the season.

Answer

Where will the truck place the sand on delivery day?

The driver places the pile wherever you direct on a clear, accessible spot, ideally close to your work area since sand is heavy at 1.35 tons per cubic yard and hard to move far by hand. Mark the drop zone ahead of time and clear any low branches or narrow gates.

Answer

Should I use sand or chip stone under my pavers?

Many installers now use clean chip stone as paver bedding instead of sand because it does not pump up through the joints during freeze thaw cycles. Sand still works well for the joint fill on top, where its fine grain locks pavers tight, so a lot of jobs use both materials together.

More delivery around Midland, Michigan

All Midland, Michigan landscape supply