• Moorhead MN Sand Delivery - Mulch Mound
  • Moorhead MN Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Hannah
Hannah
Google Review

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, which is the typical install depth for mortar mixing and paver joint filling, though some jobs run up to 2 inches. Measure your paver area or pool base footprint in square feet, then work backward from that coverage number to figure out how many yards to order. Most residential paver jobs in Moorhead run somewhere between half a yard and two yards depending on the footprint.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Moorhead Sand Delivery

Moorhead Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Hannah
Hannah
Google Review

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, which is the typical install depth for mortar mixing and paver joint filling, though some jobs run up to 2 inches. Measure your paver area or pool base footprint in square feet, then work backward from that coverage number to figure out how many yards to order. Most residential paver jobs in Moorhead run somewhere between half a yard and two yards depending on the footprint.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Moorhead Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Hannah
Hannah

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

Google Review
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review

Complete Your Outdoor Project

Sand pairs with crushed base rock underneath for paver patios and walkways, since the rock handles compaction and the sand handles the fine leveling on top. For pool installs, it is usually the only layer beneath the liner, so get it clean and evenly screeded. Some Moorhead jobs are shifting to chip stone for paver bedding instead of sand, since it will not pump or wash out the way sand can under heavy clay drainage.

Moorhead Soil Delivery
Moorhead Mulch Delivery
Mulch Mound Pro Tip

Moorhead's clay subsoil holds water long after rain, so any sand base for pavers or a pool needs a compacted rock layer underneath before you screed the sand on top. Skipping that step lets the sand settle unevenly into the clay within a season, especially after freeze thaw cycles that start showing up once you get past the September frost date. Screed the sand flat and damp, not dry, for the cleanest paver set.

Mulch Mound Pro Tip

A common mistake is using this fine washed sand as loose paver bedding the way it was done for decades. It works, but it can migrate and pump up through joints over time, especially with Moorhead's freeze thaw swings between the May and September frost dates. Many local installers now use it strictly for mortar and joint filling and switch to angular chip stone for the structural bedding layer instead.

Mulch Mound Pro Tip

If you are mixing mortar on site, order slightly extra since batching mortar wastes more material than most people expect, especially in cooler spring temperatures when mixes need reworking. Buying the full amount in one delivery instead of multiple bag runs also cuts down on inconsistent moisture content between batches, which matters more for mortar workability than most people realize until they are troweling it.

Working With Sand in Moorhead

Moorhead sits on heavy clay, which means most yards do not drain well and do not make good bedding material on their own. Contractors and homeowners here use sand as the layer that actually lets water move and lets pavers sit flat instead of shifting in the clay underneath. With hardscape season running spring through fall between the last frost in May and first frost in late September, most of this gets ordered for patios, walkways, and pool installs during that stretch. Mason sand is the term some people use, but it is the same washed, fine product either way.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is the difference between this sand and regular fill sand for my Moorhead yard?

This is washed and finely screened, so it is uniform in size and free of the silt and clay clumps you would get from digging into Moorhead's native soil. That uniformity is what makes it workable for mortar mixing and paver joints. Fill sand is coarser and cheaper but will not give you the same clean, workable mix.

Answer

How many cubic yards do I need for a 300 square foot patio?

At the standard 1 inch install depth, one cubic yard covers about 324 square feet, so a 300 square foot patio needs just under one full yard. Round up to a full yard to account for joint filling and normal waste during screeding, especially if you are new to leveling sand by hand.

Answer

When is the best time to schedule sand delivery for a paver project in Moorhead?

Spring through fall works best, generally after the last frost around May 19 and before the ground starts freezing again near September 24. Working sand and setting pavers in frozen or thawing clay soil gives inconsistent results, so most local hardscape work happens in that window.

Answer

Where will the sand be placed on delivery day and do I need to be home?

The truck places the load wherever you specify, typically a driveway or the edge of the worksite, since sand ships loose rather than bagged. You do not need to be home, but you should have the drop area cleared and accessible, and note that Moorhead's clay soil can get soft after rain, so a hard, dry surface is best for the truck.

Answer

Should I use sand or chip stone for my paver base?

Sand has been the traditional paver bedding choice for decades and still works fine for many jobs, but chip stone is increasingly used instead because it will not pump or wash out under Moorhead's clay drainage conditions. Sand remains the better choice for mortar mixing and filling paver joints regardless of which base material you choose.

More delivery around Moorhead, Minnesota

All Moorhead, Minnesota landscape supply