Ordered Dirt. Received Dirt. Would Buy Again.

How It Works
Getting started is easy — just follow these simple steps
Choose your quantity
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
Select your delivery date
Select a delivery date you'd like for the product to be dropped off at your home
Sit back and wait
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will de...
Read full review
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!
Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of cautio...
Read full review
Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!
Complete Your Outdoor Project
Most jobs that call for sand also need cement for mortar mixing or paver base stone underneath for structural support. If you are working near the falls where soil stays damp longer into spring, a layer of crushed stone under the sand bed helps water move instead of pooling under your pavers.
Service area
Areas we deliver sand in Niagara Falls, New York
For mortar mixing in this climate, keep your sand covered or under a tarp between mixing sessions once the fall rains start around the October frost date. Wet sand throws off your water to cement ratio and weakens the bond, and Niagara Falls silt loam soil already holds moisture nearby, so ground contact adds dampness fast. A dry, elevated pallet under the pile keeps it workable longer into the season.
A common mistake on paver jobs here is using sand as the final bedding layer under pavers on driveways or anywhere with vehicle traffic. It shifts and allows water to pump up between joints over freeze thaw cycles, which is why more setters in this region have moved to clean chip stone for bedding and keep sand strictly for the joint fill on top.
If your project needs both mortar sand and paver base material, order them together for one delivery instead of two separate trips, since job site space for staging multiple piles is often tight on older residential lots near the falls. Keeping the piles separated with a plywood divider on site also saves you from mixing them by accident during a rushed pour.
Working With Sand in Niagara Falls
Niagara Falls sits on silt loam soil, which drains slowly and holds water after the spring thaw, so a lot of hardscape work here waits on the ground to firm up before crews break ground. Sand is the material that solves the wet spots underneath patios, walkways, and pool decks that would otherwise heave in our freeze thaw cycles between the October and April frost dates. Masons in this area lean on it for mortar mixing on brick and block projects tied to the older housing stock near the falls, and pool installers use it to bed liners on new builds. It is a project material, not a landscaping filler, so most orders here are tied to a specific job.
Masonry vs Fill Sand
Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.
Bedding and Leveling
For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.
Working With Moisture
Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.