About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

I recently ordered from mulch mound and was thoroughly impressed with every aspect of the experience. The entire process, from placing the order to delivery was seamless and efficient. The mulch arrived exactly on time, and the quality exceeded my expectations. The color was r...

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, so a small paver patio or mortar batch job usually needs less than a full yard while a pool base or larger paver bed can run 2 to 3 yards at the standard 1 to 2 inch install depth. Because it is sold by the cubic yard, measure your square footage first and match it against the depth you actually need rather than guessing high.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

North Charleston Sand Delivery

North Charleston Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

I recently ordered from mulch mound and was thoroughly impressed with every aspect of the experience. The entire process, from placing the order to delivery was seamless and efficient. The mulch arrived exactly on time, and the quality exceeded my expectations. The color was r...

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, so a small paver patio or mortar batch job usually needs less than a full yard while a pool base or larger paver bed can run 2 to 3 yards at the standard 1 to 2 inch install depth. Because it is sold by the cubic yard, measure your square footage first and match it against the depth you actually need rather than guessing high.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of North Charleston Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most mason sand orders in this area pair with paver base stone or crushed granite for the compacted foundation layer, with the sand going on top as bedding or joint fill. If you are mixing mortar for brickwork, you will also want portland cement on hand. Some crews are shifting to clean chip stone for paver bedding instead of sand since it will not pump, worth considering if your project sits in a low, wet spot.

Mulch Mound Pro Tip

In North Charleston's humidity, mason sand can hold surface moisture longer than you expect, especially if it sits under a tarp in summer. If you are mixing mortar, let the pile dry to a consistent moisture level before batching, uneven moisture throws off your mix ratio and weakens the joint. Pull from the middle of the pile, not the rain-exposed crust, for the most consistent results on brick and block work.

Mulch Mound Pro Tip

A common mistake with paver joint sand is sweeping it in dry and calling it done. In this climate, afternoon thunderstorms are frequent from late spring through fall, and a fresh joint that has not been compacted and lightly watered in will wash out in the first hard rain. Sweep, tamp, and water it in before you walk away from the job, especially if rain is in the forecast within a day or two.

Mulch Mound Pro Tip

If your project is a paver bed rather than mortar work, ask whether chip stone makes more sense than sand. It has become the preferred bedding layer for many paver crews here because it will not pump up between joints or wash out under heavy rain, which matters given how much rainfall this area gets during hurricane season and summer storms.

Working With Sand in North Charleston

North Charleston sits on sandy loam already, so people sometimes assume any sand will do, but mason sand is a different animal from what is under your yard. It is washed and screened to a fine, uniform grain that mixes into workable mortar and settles evenly under pavers near Park Circle and around the older brick homes in this city. In a climate with hot, humid summers and a long building season, contractors need sand that will not clump or hold moisture unevenly, and this grade holds up to that. It is not a fill sand or a drainage sand, it is built for precision work.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same as what is called sand pit or fill sand around here?

No. Mason sand is washed and screened to a fine, uniform grain specifically for mortar and paver joints, while fill sand or pit sand is coarser and unwashed, meant for grading or backfill. They are not interchangeable if you are mixing mortar or setting pavers, the uniform grain is what makes mason sand workable and consistent.

Answer

How much mason sand do I need for a small patio?

One cubic yard covers about 324 square feet at a 1 inch depth, which is the typical joint or bedding depth for most paver work. A standard 200 square foot patio usually needs a little under a cubic yard, so most homeowners order a single yard and have a small amount left over for touch ups.

Answer

When is the best time to install pavers with mason sand around Park Circle?

Spring through fall is the busiest hardscape season here, and it lines up with better working conditions before summer humidity peaks. Try to avoid installing right before a heavy rain forecast since freshly swept joint sand needs a chance to compact and settle before it gets soaked.

Answer

Do you deliver mason sand to tight driveways or older neighborhoods with limited access?

Yes, just let us know your access situation when you schedule delivery so the driver can plan the drop spot accordingly. Older North Charleston streets and driveways can be narrow, so having a clear, reachable spot for the truck makes for a faster, cleaner delivery.

Answer

Should I use mason sand or chip stone under my pavers?

Mason sand has been the traditional choice for paver bedding and joints, but many local crews are shifting to clean chip stone for the base layer because it will not pump or shift under wet conditions. Sand still works well for joint fill and is standard for mortar mixing, so the right choice depends on which part of the job you are doing.

More delivery around North Charleston, South Carolina

All North Charleston, South Carolina landscape supply