• North Port FL Sand Delivery - Mulch Mound
  • North Port FL Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Hannah
Hannah
Google Review

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

One cubic yard covers about 324 square feet at a 1 inch depth, and most installs here run 1 to 2 inches depending on whether you are setting paver joints, mixing mortar, or bedding a pool floor. For joint work on a patio or walkway, figure the square footage of the paved area and use the 1 inch coverage rate as your baseline. Mortar mixing is usually ordered by the batch need rather than a coverage rate, so talk to your mason about volume per bag ratio before you order.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

North Port Sand Delivery

North Port Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Hannah
Hannah
Google Review

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

One cubic yard covers about 324 square feet at a 1 inch depth, and most installs here run 1 to 2 inches depending on whether you are setting paver joints, mixing mortar, or bedding a pool floor. For joint work on a patio or walkway, figure the square footage of the paved area and use the 1 inch coverage rate as your baseline. Mortar mixing is usually ordered by the batch need rather than a coverage rate, so talk to your mason about volume per bag ratio before you order.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of North Port Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Hannah
Hannah

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

Google Review
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review

Complete Your Outdoor Project

A lot of North Port hardscape jobs pair this sand with paver base stone underneath and either pavers or a screened topsoil border around the edges. If you are doing a pool install, base sand often gets ordered alongside crushed stone for drainage around the shell. None of these have to come from us in the same load, but planning the order together saves a second delivery.

North Port Soil Delivery
North Port Mulch Delivery
Map of the sand delivery area around North Port, Florida

Service area

Areas we deliver sand in North Port, Florida

See All Locations
Mulch Mound Pro Tip

Mason sand and concrete sand are not interchangeable, even though people ask for them the same way. Mason sand is finer and more uniformly graded, which is exactly what makes mortar spread smoothly under a trowel without gritting up. If your mason specs mason sand and you show up with concrete sand, expect the mix to fight you all day. Confirm the exact material before you order, not after the truck leaves.

Mulch Mound Pro Tip

For paver joints, a lot of contractors in Florida have moved away from sand entirely in favor of clean chip stone, because polymeric and regular sand can pump out from under pavers during heavy rain, and North Port gets plenty of that in summer. If you are still speccing sand for joints, know that chip stone is the more stable long term choice and ask your contractor which one the job actually calls for.

Mulch Mound Pro Tip

Order pool base sand a few days ahead of your pool contractor's install date, not the morning of. Sand sitting exposed to a hard summer rain can compact or wash if it is not covered, and a soggy pile slows a crew down on install day. A tarp over the pile for a day or two costs nothing and saves a headache.

Working With Sand in North Port

North Port sits on sandy, fast draining native soil, so this material is not fighting the ground, it is fighting the job spec. Most of what we deliver here goes into mortar mixes for block work, paver joint fill on patios and driveways, and pool bases for the above ground and inground pools going in around town as the city keeps growing. It is not a base material for grading or fill, it is a finish and bonding sand, so match the order to the actual task, mortar, joints, or pool prep.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as concrete sand?

No. Mason sand is finer and more uniformly screened than concrete sand, which is what makes it workable for mortar and tight enough for paver joints. Concrete sand is coarser and used for structural mixes. If your project spec calls for one and you order the other, the mix or joint fill will not perform the way it should, so confirm with your mason or contractor first.

Answer

How much sand do I need for paver joints on a 400 square foot patio?

At a 1 inch depth, one cubic yard covers about 324 square feet, so a 400 square foot patio would need a little more than one cubic yard for full joint fill. In practice, joint fill uses far less than a full inch across the whole surface since it only fills the gaps, so actual usage is usually lower than that estimate. Order slightly over rather than under.

Answer

When is the best time to schedule a sand delivery for a hardscape job in North Port?

Hardscape work here runs steady from spring through fall, and sand for mortar or pool bases is generally a project driven order rather than a seasonal one. The main thing to plan around is Florida's summer rain pattern, since a wet base sand pile slows down install day. Scheduling delivery a day or two before your crew starts, with a tarp ready, works well.

Answer

Where will the truck put the sand on my property?

We place the load wherever you specify at your address, as close to the work area as truck access allows. North Port lots vary in driveway width and yard access, so let us know at checkout if there are gates, low branches, or tight turns the driver should expect. Delivery timing itself is set at checkout based on available scheduling.

Answer

Should I use sand or chip stone for my paver joints?

Sand has been the traditional choice for paver joints, but chip stone is increasingly used instead because it resists pumping out from under pavers during heavy rain, which matters in a climate like North Port's. Sand is still standard for mortar mixing and pool bases. If your project is specifically paver joints, ask your contractor which material their install method actually calls for.

More delivery around North Port, Florida

All North Port, Florida landscape supply