About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

One cubic yard covers about 324 square feet at a 1 inch depth, and most jobs here call for 1 to 2 inches depending on whether you are bedding pavers or leveling a pool base. For a typical patio project, measure your square footage and divide by 324 to get a rough cubic yard estimate at 1 inch, then double the sand if you are going to 2 inches. Mortar jobs use far less volume per square foot since it is mixed rather than spread flat.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Onalaska Sand Delivery

Onalaska Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

One cubic yard covers about 324 square feet at a 1 inch depth, and most jobs here call for 1 to 2 inches depending on whether you are bedding pavers or leveling a pool base. For a typical patio project, measure your square footage and divide by 324 to get a rough cubic yard estimate at 1 inch, then double the sand if you are going to 2 inches. Mortar jobs use far less volume per square foot since it is mixed rather than spread flat.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Onalaska Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Sand pairs naturally with paver base gravel and edging materials on most patio and walkway jobs around Onalaska. Pool contractors often order it alongside pea gravel for drainage layers beneath the liner base. If you are mixing mortar, you will also want cement on hand before the load arrives so you are not waiting on a second trip.

Map of the sand delivery area around Onalaska, Wisconsin

Service area

Areas we deliver sand in Onalaska, Wisconsin

Mulch Mound Pro Tip

Mason sand and paver bedding sand are not interchangeable even though they look similar in the pile. This fine, uniform sand is built for mortar workability, but as bedding under pavers it can shift and let water pump up through joints over time, which is why many installers around Onalaska have moved to compacted chip stone for paver bases and reserve this sand strictly for mortar mixing and pool base leveling.

Mulch Mound Pro Tip

Time your sand delivery for a dry stretch if possible. Wet sand is heavier, harder to shovel evenly, and throws off your mortar mix ratios if it is dumped straight into a batch. Given Onalaska's silt loam holds moisture longer after rain, let a delivered pile sit under cover for a day if the forecast has been wet before you start mixing.

Mulch Mound Pro Tip

If your project uses both sand and gravel, such as a pool base or a paver installation, ask about scheduling both deliveries close together so your crew is not making two separate site visits. It also means you are shaping your job site prep, like leveling and compacting the sub base, around one delivery window instead of juggling two.

Working With Sand in Onalaska

Onalaska sits on silt loam soil, which drains slowly enough that sand plays a very specific role here, mostly as a bedding and mortar component rather than a soil amendment. With hardscape season running spring through fall between the last frost around May 15 and first frost around October 15, most sand orders come in for patio joints, paver bases, and pool installs near the lake. Some crews still use it under pavers, though many local installers have shifted to chip stone bedding since it locks in place better and does not pump moisture the way sand can in wetter silt loam conditions. If you are mixing mortar for a masonry project, this sand's fine, uniform grain is what keeps the mix workable.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, this washed and finely screened sand is what many regions call mason sand. It is the fine, uniform grain that makes mortar mixes workable, and it also works for pool base leveling. It is not the same product as coarser concrete sand or paver bedding chip stone.

Answer

How much sand do I need for a 200 square foot patio?

At a 1 inch depth, one cubic yard covers about 324 square feet, so 200 square feet would need roughly two thirds of a cubic yard. If you are going to a 2 inch depth for paver bedding, plan on close to one and a half cubic yards to be safe.

Answer

When is the best time to have sand delivered in Onalaska?

Most hardscape and pool projects here run spring through fall, between the last frost around May 15 and first frost around October 15. Delivery works fine outside that window too, but keep in mind ground conditions and job site access can be tougher once temperatures drop.

Answer

Where will the sand be placed on delivery day?

The truck places the load wherever there is safe, clear access at your site, typically a driveway or a flat area near your work zone. Let us know at checkout if there are access limits like a narrow driveway or overhead wires so the delivery goes smoothly.

Answer

Should I use sand or chip stone under my pavers?

Many installers around Onalaska have shifted to clean chip stone for paver bedding because it locks together and does not pump moisture the way sand can, especially given the area's slow draining silt loam. Sand is still the right call for mortar mixing and pool base leveling, so the best choice depends on what you are building.

More delivery around Onalaska, Wisconsin

All Onalaska, Wisconsin landscape supply