• Orangeburg SC Sand Delivery - Mulch Mound
  • Orangeburg SC Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Donna Nedrow
Donna Nedrow
Google Review

Great service. We ordered topsoil from Mulch Mound and the best experience. Thank you so much!

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, or roughly half that at 2 inches, which is the deeper end for bedding under heavier pavers. For joint filling on an existing paver patio you need far less, often a fraction of a yard depending on joint width. Measure the actual project area first, mortar mixing and pool base jobs use more sand per square foot than a joint fill top up.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Orangeburg Sand Delivery

Orangeburg Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Donna Nedrow
Donna Nedrow
Google Review

Great service. We ordered topsoil from Mulch Mound and the best experience. Thank you so much!

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, or roughly half that at 2 inches, which is the deeper end for bedding under heavier pavers. For joint filling on an existing paver patio you need far less, often a fraction of a yard depending on joint width. Measure the actual project area first, mortar mixing and pool base jobs use more sand per square foot than a joint fill top up.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Orangeburg Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Jana Ozanich
Jana Ozanich

One of the easiest customer service experiences I've had in a long time! Mulch Mound made it so simple. After putting it off for a while, I looked ...

Read full review

One of the easiest customer service experiences I've had in a long time! Mulch Mound made it so simple. After putting it off for a while, I looked at the weather and knew I needed to get to mulching ASAP before the rain came if I didn't want to wait another week. I put my order in for the next day online and they came right at 9 AM. The employee who dropped off the mulch did a great job, putting it right on the tarp I laid out, she even made sure none of it got on the yard and double checked the truck bed to make sure it all came out. The mulch was exactly what I needed and arrived right on time.

Google Review
Michelle Cooper
Michelle Cooper

We have always spread our own mulch for the past 24 years. This was our first time with the Mulch Mound - things I liked: they have online ordering...

Read full review

We have always spread our own mulch for the past 24 years. This was our first time with the Mulch Mound - things I liked: they have online ordering and provide a digital receipt which means you can remember how much you ordered (I always forget for the next year!), they were on time, they were able to deliver in 48 hours, they were generous with the portion (we got 9 yards and it felt like a FULL nine yards!), the driver was polite! We have ordered from reputable places, and there is always a little trash in the mulch. The mulch we recv'd from Mulch Mound had barely any... we were pleasant surprised!!! Color was great! Not to mention - the price was competitive and LOWER than other mulch places around. We will use again !! Highly recommend! Thanks Mulch Mound!

Google Review

Complete Your Outdoor Project

Most paver jobs around Orangeburg pair this sand with crushed base stone underneath and either polymeric or additional mason sand for the joints. If you are mixing mortar for a block or brick project, you will also want a companion order of cement. For pool installations, a firm gravel or stone base layer usually goes down before the sand leveling course.

Orangeburg Soil Delivery
Orangeburg Mulch Delivery
Mulch Mound Pro Tip

Mason sand is finer and more uniform than concrete sand, which is exactly why it works for mortar but is a poor substitute if a spec calls for concrete sand in a structural mix. If you are mixing mortar in Orangeburg's humidity, keep bags or piles covered between uses, since this fine sand picks up moisture fast and that changes your mix ratio more than people expect.

Mulch Mound Pro Tip

A common mistake on paver jobs is using mason sand for joint fill on a patio that gets regular rain, since it can wash out or get pushed around by pressure washing over time. Many installers around here have shifted to clean chip stone for joints because it locks in and does not pump up through the pavers the way fine sand can after a few seasons of freeze thaw cycling, even mild ones.

Mulch Mound Pro Tip

If your project uses both bedding sand and joint material, order the bedding portion as mason sand and consider chip stone separately for joints rather than buying more of one material to cover both jobs. It is a little more planning up front but it saves you from redoing joint work in a year or two when washed out sand needs replacing.

Working With Sand in Orangeburg

Orangeburg sits on sandy loam already, so this is not a soil amendment, it is a construction material for specific tasks. With hardscape season running spring through fall here and mild winters that rarely stop outdoor work, mason sand gets steady use for mortar mixes, paver joint fill, and pool base leveling. The sandy native soil drains well, which actually helps hardscape bases set up and stay stable once the sand is compacted in place. Because the ground rarely freezes hard here, joint sand and bedding layers have a longer window to settle before any real frost pressure in November.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, that is the common name for it in this region. It is washed, finely screened natural sand used for mortar mixing, paver joints, and pool bases. It is finer and more uniform than concrete sand, which is what makes it workable for mortar and tight joint fill.

Answer

How many cubic yards do I need for a paver patio?

For bedding sand under pavers at a 1 inch depth, one cubic yard covers about 324 square feet, so a typical 200 square foot patio needs a little over half a yard. Joint fill on top of that uses much less, often under a quarter yard depending on how tight your joints are cut.

Answer

When is the best time to install a sand base for pavers here?

Spring through fall is peak hardscape season in Orangeburg, and the mild winters mean you have flexibility beyond that too. First frost typically hits around November 5, so plan any pool base or paver bedding work with enough buffer to compact and settle the sand before that.

Answer

Where will the sand be placed on delivery day?

We place the load wherever you specify, usually a driveway or a staging area near your work site. Just make sure the drop spot is clear and accessible for a delivery truck, and that you have a plan to move it if it cannot sit there long term.

Answer

Should I use mason sand or chip stone for my paver joints?

Mason sand is the traditional choice and works fine for many patios, but chip stone is increasingly used instead because it locks into joints and does not pump or wash out over time. If your project sees heavy rain runoff or regular pressure washing, chip stone is worth considering over sand for the joints specifically.

More delivery around Orangeburg, South Carolina

All Orangeburg, South Carolina landscape supply