About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Great service. We ordered topsoil from Mulch Mound and the best experience. Thank you so much!

At a 1 inch depth, one cubic yard covers about 324 square feet, and at 2 inches that drops to roughly 162 square feet, so measure your project area first and match it to the depth your application actually needs. Mortar mixing and pool bases usually call for the full 2 inch working layer, while paver joint filling needs only a thin skim coat. Order by the cubic yard and round up slightly since sand compacts some once it settles.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Parkersburg Sand Delivery

Parkersburg Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Great service. We ordered topsoil from Mulch Mound and the best experience. Thank you so much!

At a 1 inch depth, one cubic yard covers about 324 square feet, and at 2 inches that drops to roughly 162 square feet, so measure your project area first and match it to the depth your application actually needs. Mortar mixing and pool bases usually call for the full 2 inch working layer, while paver joint filling needs only a thin skim coat. Order by the cubic yard and round up slightly since sand compacts some once it settles.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Parkersburg Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Sand pairs naturally with block, brick, or paver stock already staged for the job, and with portland cement if you're mixing mortar on site. For paver bedding, many Parkersburg contractors are shifting to clean chip stone instead, since it locks in place and doesn't pump moisture the way sand can under freeze thaw cycles near the river.

Map of the sand delivery area around Parkersburg, West Virginia

Service area

Areas we deliver sand in Parkersburg, West Virginia

Mulch Mound Pro Tip

Parkersburg's freeze thaw swings between the Oct 24 first frost and Apr 20 last frost mean any sand base under a pool or patio needs to be compacted in thin lifts, not dumped and leveled all at once. If you pour it too deep and skip compaction, spring thaw in the silt clay subsoil will cause uneven settling by the following winter. Work in 1 inch lifts and tamp between each one.

Mulch Mound Pro Tip

A common mistake on mortar jobs here is using sand straight off the pile without checking moisture content first. Wet sand throws off your mix ratio and makes mortar too soupy to hold a joint line, especially on humid summer days along the river. Let a scoop sit and squeeze test it, if it holds a loose ball and crumbles, it's ready to mix.

Mulch Mound Pro Tip

If you're doing both mortar work and paver joints on the same project, order the mason sand as one delivery instead of splitting trips, since the finer grain works for both uses. Save chip stone for the paver bedding layer underneath, where it resists the pumping and washout that sand can suffer once winter runoff moves through Parkersburg's clay heavy yards.

Working With Sand in Parkersburg

Around Blennerhassett Island and throughout Parkersburg, the silt clay base under most yards drains slowly and swells when wet, which makes bedding layers and mortar joints more important than they'd be in a sandier region. This material is finer and more uniform than concrete sand, which is exactly what gives mortar its workability on brick and block projects common in the older river neighborhoods. Pool base work also benefits from that fine, even grain since it packs tight under liners without leaving voids. It is not meant to replace chip stone under pavers, where drainage matters more than smoothness.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand I'd find at a hardware store here?

Yes, this is washed and finely screened mason sand, the same grade used for mortar mixing and paver joints. It's finer and more uniform than concrete sand, which is what makes it workable for masonry rather than structural fill. We deliver it in bulk by the cubic yard instead of individual bags.

Answer

How many cubic yards do I need for a small patio joint fill?

For joint filling only, a thin skim coat rarely needs more than a quarter to half a cubic yard for most residential patios, since you're not covering the full surface at depth. One cubic yard at a 1 inch layer covers about 324 square feet, so joint work uses a small fraction of that.

Answer

When is the best time of year to do mortar or paver work in Parkersburg?

Spring through fall is when most hardscape work happens here, after the Apr 20 last frost and before the Oct 24 first frost sets in. Mortar cures poorly in freezing temperatures, so most masons avoid pouring once nighttime lows drop near freezing in late fall.

Answer

Can you deliver to a driveway with limited turnaround space?

Yes, just let us know about tight access, slopes, or narrow driveways when you schedule delivery so we can plan the drop accordingly. Delivery is scheduled at checkout, and the load gets placed wherever you specify, typically a driveway or staging area near the project site.

Answer

Should I use sand or chip stone under my pavers?

For paver bedding, clean chip stone is increasingly preferred over sand since it locks in place and doesn't pump or wash out under freeze thaw cycles. Sand is still the right choice for mortar mixing and pool bases, where its fine, uniform grain gives you workability that chip stone can't match.

More delivery around Parkersburg, West Virginia

All Parkersburg, West Virginia landscape supply