I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

How It Works
Getting started is easy — just follow these simple steps
Choose your quantity
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
Select your delivery date
Select a delivery date you'd like for the product to be dropped off at your home
Sit back and wait
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!
Complete Your Outdoor Project
Most jobs that call for this sand also need paver base or crushed stone underneath it for structure, especially given the clay loam soil common around Passaic that holds water and needs a well drained base to prevent heaving. If you're mixing mortar for brick or stone repair, cement is the obvious companion. Some installers are now pairing chip stone with this sand rather than using sand alone for full paver bedding.
Service area
Areas we deliver sand in Passaic, New Jersey
When mixing mortar for brick or stone repair work common in Passaic's older housing, keep this sand dry and covered before use, damp sand throws off your water to cement ratio and weakens the bond. If you're working on foundation repair near the river, extra caution on mortar strength matters since these homes see more moisture exposure than inland properties. Cover any leftover pile with plastic sheeting between work sessions to keep it workable.
A common mistake with paver joint sand is filling joints before final compaction of the base. Compact your paver bedding layer first, then sweep sand into joints and vibrate the whole patio once more. Skipping that second pass leaves joints under filled, and with Passaic's freeze thaw cycle running late October through mid April, under filled joints let pavers shift and rock within a season or two.
If you're doing both mortar work and paver joints on the same project, order them as separate deliveries rather than trying to make one pile serve both purposes, mortar sand needs to stay clean and dry while joint sand often gets swept in damp. Buying in cubic yard bulk instead of bagged material also cuts down on plastic waste and trips to the store, especially useful on multi weekend hardscape jobs.
Working With Sand in Passaic
Passaic sits low near the Passaic River at 112 feet elevation, and a lot of the older housing stock here has masonry work, brick steps, stone foundations, retaining walls, that need repointing or repair. This sand's fine, uniform grain is what makes mortar workable enough to trowel into tight joints. For paver patios and walkways, it still fills joints well, though a growing number of local installers are shifting to clean chip stone for bedding since it does not pump up through pavers the way sand can after a hard freeze thaw cycle. With frost arriving late October and lingering into mid April, that pumping risk is worth planning around here.
Masonry vs Fill Sand
Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.
Bedding and Leveling
For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.
Working With Moisture
Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.