Ordered Dirt. Received Dirt. Would Buy Again.

How It Works
Getting started is easy — just follow these simple steps
Choose your quantity
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
Select your delivery date
Select a delivery date you'd like for the product to be dropped off at your home
Sit back and wait
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will de...
Read full review
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!
Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of cautio...
Read full review
Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!
Complete Your Outdoor Project
Fill dirt does the structural work, but nothing should grow directly in it, so most jobs finish with a few inches of topsoil capped over the top wherever grass, beds, or sod are planned. If the finished area will see foot traffic or drainage concerns, a layer of crushed gravel or sand underneath in wet zones helps the fill settle evenly. Mulch or sod usually comes in as a separate follow-up order once the grade is set.
Service area
Areas we deliver fill dirt in Pensacola, Florida
Pensacola's sandy soil drains well but has almost no cohesion, so fill placed in one thick dump will shift and settle unevenly for years. Place it in 6 to 8 inch lifts and compact each one with a plate compactor or by wheel-rolling equipment over it before adding the next layer. Skipping this step is the number one reason people end up with a sunken patch next to a pool deck or foundation a year later.
Do not plant, seed, or lay sod directly into fill dirt, it is subsoil and lacks the organic content and nutrients anything needs to root well. Cap the finished, compacted grade with 3 to 4 inches of topsoil before any planting. Skipping the cap is a common mistake that leaves grass thin and patchy no matter how much fertilizer gets used afterward.
If you are building up a large low area, order the full volume in one delivery rather than staging smaller loads, since remobilizing a truck for a second trip usually costs more than getting the estimate slightly conservative upfront. Round up rather than down on your yardage, extra fill dirt is easier to spread thin elsewhere than to source again mid-project.
Grading and Filling in Pensacola
Pensacola sits at 69 feet of elevation with sandy soil that drains fast but holds almost no structure, so low spots and areas near foundations tend to settle or pond after heavy rain. Fill dirt gives you a structural base to correct that grade before anything else goes on top. Because the native soil here is loose sand to begin with, compacting fill in lifts matters even more than in clay-heavy regions, otherwise the new fill and the surrounding sand settle at different rates. This is common ahead of pool installs and slab work around Fort Pickens area properties where the water table sits close to the surface.
What Clean Fill Is
Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.
Fill Dirt vs Topsoil
Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.
Compact in Lifts
Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.