About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

One cubic yard of this fill dirt covers about 54 square feet at a 6 inch depth, and most structural fill jobs run 6 to 12 inches deep depending on how much grade you're correcting. Measure the low area's square footage, decide your target depth, and order in cubic yards from there rather than guessing bags, since bagged dirt isn't practical at this scale.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Plainfield Fill Dirt Delivery

Plainfield Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

One cubic yard of this fill dirt covers about 54 square feet at a 6 inch depth, and most structural fill jobs run 6 to 12 inches deep depending on how much grade you're correcting. Measure the low area's square footage, decide your target depth, and order in cubic yards from there rather than guessing bags, since bagged dirt isn't practical at this scale.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Plainfield Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill jobs in Plainfield finish with a cap of topsoil once the fill is compacted, since nothing grows well straight in subsoil. If the finished area will see foot traffic or drainage concerns, a layer of gravel underneath doorways or low spots can help. Mulch or sod usually comes last, once the grade is set and stable.

Mulch Mound Pro Tip

Compact in 6 to 8 inch lifts, not all at once. Dumping a full 12 inches and walking away looks fine for a season, then Plainfield's silt loam settles unevenly once it takes on moisture from spring rain or the freeze thaw cycle. A plate compactor rented for an afternoon after each lift saves you from a sunken patch showing up next to your foundation a year later.

Mulch Mound Pro Tip

The most common mistake we see locally is treating fill dirt like topsoil and planting straight into it. It's subsoil, screened of debris but stripped of the organic matter that makes silt loam workable here. Cap it with 4 to 6 inches of real topsoil before grass, beds, or anything with roots goes in, or you'll be fighting poor drainage and compacted ground all season.

Mulch Mound Pro Tip

If you're filling a large low area, order the full volume in one delivery rather than staging multiple small loads. It's more efficient to spread and compact once, and you avoid mismatched material consistency between loads. Pair the order with topsoil delivered the same trip if your timeline allows, since both are priced by the yard and it saves a second delivery fee.

Grading and Filling in Plainfield

Plainfield sits on silt loam, which drains fine on the surface but holds water and shifts once it's saturated, so low areas near the river corridor and older parts of town settle over time. Fill dirt is how you correct that grade before anything else goes in, whether that's a patio slab, a shed pad, or the yard around a new pool. Because it's structural, not topsoil, it needs to be compacted in stages here rather than dumped and left, especially with our freeze thaw cycle running roughly October through late April. Skip the compaction step and you'll be watching that spot sink again by next spring.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this fill dirt clean enough to use around my foundation?

Yes, it's subsoil screened of debris like roots, rocks, and construction scrap, which is exactly what foundation backfill calls for. It's not topsoil and won't support planting on its own, but for structural backfill and grading it's the right material.

Answer

How many cubic yards do I need to fill a low spot 200 square feet at 8 inches deep?

At 8 inches deep, you're covering roughly 40 square feet per cubic yard, so 200 square feet needs about 5 cubic yards. Round up slightly since compaction will settle the material a bit lower than it looks freshly dumped.

Answer

Can I place this fill dirt right before winter?

You can, but with our first frost landing around October 9, anything placed late in the season may not settle fully before the ground freezes. If the timeline allows, get lifts compacted before that date so you're not dealing with frozen, hard to work fill mid winter.

Answer

Will the delivery truck be able to reach my backyard?

Trucks deliver to where they can access, typically a driveway or curb area, and the material is dumped in a pile rather than spread. If your project area is fenced in or behind the house, plan on moving it by wheelbarrow, and let us know about tight access when you schedule.

Answer

Should I get fill dirt or topsoil for raising my yard's grade?

Use fill dirt for the bulk of the raise since it's denser and cheaper per yard for structural volume, then cap the top 4 to 6 inches with topsoil if grass or plants are going in. Using topsoil alone for a deep fill is a waste of better material that won't compact the same way.

More delivery around Plainfield, Illinois

All Plainfield, Illinois landscape supply