• Plainfield IL Sand Delivery - Mulch Mound
  • Plainfield IL Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, and most paver joint or mortar work only calls for a 1 to 2 inch layer, so a single yard often handles a mid size patio or walkway project. Measure your square footage first, then decide if you're closer to the 1 inch or 2 inch depth depending on joint width or mortar batch size, since that roughly halves or doubles your yardage need.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Plainfield Sand Delivery

Plainfield Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, and most paver joint or mortar work only calls for a 1 to 2 inch layer, so a single yard often handles a mid size patio or walkway project. Measure your square footage first, then decide if you're closer to the 1 inch or 2 inch depth depending on joint width or mortar batch size, since that roughly halves or doubles your yardage need.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Plainfield Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review

Complete Your Outdoor Project

Sand for paver joints usually gets paired with crushed limestone or road base for the compacted foundation layer underneath, since sand alone won't support traffic load. If you're doing mortar work, you'll also want to line up your brick or stone before the sand delivery so the crew isn't waiting around. Some jobs also pull in a bit of chip stone as a bedding alternative, since it holds up better than sand under repeated freeze thaw movement.

Plainfield Soil Delivery
Plainfield Mulch Delivery
Map of the sand delivery area around Plainfield, Illinois

Service area

Areas we deliver sand in Plainfield, Illinois

See All Locations
Mulch Mound Pro Tip

Because Plainfield's silt loam holds water longer than sandy ground, don't lay your sand base directly on wet or recently rained on soil. Let the excavated area dry out for a day if possible, then compact in thin lifts. Skipping this step is the most common reason paver patios in this area develop soft spots or uneven settling by the second winter, once the freeze thaw cycle finds any trapped moisture underneath.

Mulch Mound Pro Tip

If you're doing paver work, know that finely screened sand like this is increasingly being replaced by clean chip stone for bedding, because chip stone doesn't pump up through joints the way sand can under freeze thaw pressure. Sand still makes sense for mortar mixing and pool base work, but for a paver base in this climate, ask your contractor whether chip stone is the better long term choice for your specific project.

Mulch Mound Pro Tip

Order for the whole project at once rather than in stages. Sand delivered in one drop is cheaper per yard than splitting it into two smaller orders, and having extra on site during a spring or fall build means you're not waiting on a second delivery while your crew stands idle. Leftover sand also stores fine under a tarp for the next season's touch up work.

Working With Sand in Plainfield

Plainfield sits on silt loam, which drains slower than sandy soil and holds moisture longer, so any hardscape work here benefits from a proper sand or gravel base rather than setting stone directly into native soil. With frost reaching down through winter and the ground freezing solid between October and April, paver joints and mortar joints need a fine, uniform sand that compacts evenly and does not leave voids that trap water and heave in a freeze thaw cycle. Most of the sand work we deliver here goes into patios, walkways, and mortar mixes for brick and stone repair around the older homes near downtown. It is not a lawn or garden material, it is a building material.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What's the difference between this sand and regular fill sand for my Plainfield project?

This is washed and finely screened natural sand, sometimes called mason sand, meant for mortar mixing, paver joints, and pool bases. It's finer and more uniform than concrete sand or fill sand, which makes it workable for mortar but not ideal as general fill or grading material. If you're leveling ground rather than building, a coarser material is usually the better and more economical choice.

Answer

How many cubic yards of sand do I need for a paver patio in Plainfield?

One cubic yard covers about 324 square feet at a 1 inch depth. For paver joints you typically only need a thin fill layer, so measure the total joint area rather than the whole patio surface. Most residential patios use well under a full yard just for joints, but bedding layers and mortar work can add up, so size your order around your actual project scope.

Answer

When is the best time to install sand for hardscape projects in Plainfield?

Spring through fall is peak hardscape season here, once the ground has thawed from the winter freeze and dried out enough to compact properly. Avoid working on wet silt loam soil right after heavy rain, since it won't compact evenly underneath your sand layer. Late fall projects should wrap up before the ground starts freezing again around early October.

Answer

Where does the sand get placed on delivery day at my Plainfield property?

The truck dumps the load in a single spot you choose, typically a driveway or a flat area near the work site, since it isn't shoveled or carried in by hand. Make sure there's clear access for a full size delivery truck and enough space for the pile, and put down a tarp first if you want to protect asphalt or concrete underneath.

Answer

Should I use sand or chip stone under my pavers?

Sand has traditionally been used for paver bedding, but it's increasingly being replaced by clean chip stone because chip stone doesn't pump up through the joints during freeze thaw cycles, which matters given Plainfield's cold winters. Sand still works well for mortar mixing and pool base applications where its fine, uniform texture is actually the advantage.

More delivery around Plainfield, Illinois

All Plainfield, Illinois landscape supply