About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

Fill dirt is sold by the cubic yard, and one yard covers about 54 square feet at a 6 inch depth. For most backfill and low spot jobs, plan on 6 to 12 inches of depth depending on how much you need to raise the grade, so a small low area might need 1 to 2 yards while a foundation backfill or pool area can run considerably higher. Measure the low or open area in square feet, then match it against the depth you actually need.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Port Huron Fill Dirt Delivery

Port Huron Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

Fill dirt is sold by the cubic yard, and one yard covers about 54 square feet at a 6 inch depth. For most backfill and low spot jobs, plan on 6 to 12 inches of depth depending on how much you need to raise the grade, so a small low area might need 1 to 2 yards while a foundation backfill or pool area can run considerably higher. Measure the low or open area in square feet, then match it against the depth you actually need.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Port Huron Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill jobs finish with a cap of topsoil once the grade is where you want it, since fill dirt itself isn't meant to grow anything. If the finished area will see grass or plantings, order topsoil for the top few inches and consider mulch or gravel for any adjacent bed or path work in the same delivery.

Mulch Mound Pro Tip

Sandy loam in Port Huron drains quickly, which sounds helpful but it means fill placed in one thick pour tends to shift and void out underneath as water moves through it. Place fill in 6 to 8 inch lifts and compact each one with a plate compactor or hand tamper before adding the next. Skipping this step is exactly why people come back a year later wondering why their new patio pad sank two inches on one corner.

Mulch Mound Pro Tip

The most common mistake with fill dirt is treating it like topsoil and expecting things to grow in it. It's subsoil, screened of roots and debris, but it has none of the organic matter plants need. Always cap finished fill with 4 to 6 inches of real topsoil before seeding or planting, especially given Port Huron's already lean sandy soils that need help holding nutrients.

Mulch Mound Pro Tip

If you're backfilling around a foundation or pool, order slightly more fill than the void looks like it needs, since settling and compaction eat into your volume fast. Pairing one delivery of fill dirt with a smaller topsoil order for the finish layer is usually more efficient than two separate deliveries weeks apart, and it keeps your project moving through Port Huron's shorter building season.

Grading and Filling in Port Huron

Port Huron sits at a modest 584 feet elevation with sandy loam soil that drains fast but also settles unevenly around structures and low yard sections near the water. That combination means fill dirt gets used here for raising soggy low spots, leveling ground before a patio or shed, and backfilling foundations after basement or pool work. Because the frost line runs from late October to late April, most fill jobs happen in the warmer months when the ground is workable and compaction actually holds. This is structural material, not something you plant into directly.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Can I use fill dirt to level my whole backyard in Port Huron?

Yes, fill dirt is the right material for raising low or uneven ground, but it needs to go down in compacted 6 to 8 inch lifts rather than one thick dump, especially in sandy loam soil that shifts as water moves through it. If any part of the leveled area will be planted, cap it with topsoil once the grade is set.

Answer

How many cubic yards of fill dirt do I need for a low spot in my yard?

One cubic yard covers about 54 square feet at a 6 inch depth, so measure your low area in square feet and match it to the depth you need to raise. A 100 square foot spot needing 6 inches of fill takes roughly 2 cubic yards, more if you're going deeper or the area is irregular.

Answer

When is the best time to bring in fill dirt in Port Huron?

Fill dirt work is driven by the project, not the season, but it's easiest to compact properly when the ground isn't frozen or waterlogged. With frost typically running late October through late April, most people schedule fill jobs in spring through fall when the sandy loam underneath is workable and lifts compact reliably.

Answer

Where will the delivery be placed on my property?

The load gets placed wherever your driveway or yard access reasonably allows, so let us know the drop spot when you schedule and clear a path beforehand. If your site has tight access or the truck can't reach the exact spot, the crew will place it as close as possible and you can move it from there.

Answer

Should I get fill dirt or topsoil for my project?

Fill dirt is for structural jobs, raising grade, backfilling foundations, building up before something else goes on top. It has no organic matter and won't support planting on its own. Topsoil is what you cap it with if grass, garden beds, or landscaping are the end goal for that area.

More delivery around Port Huron, Michigan

All Port Huron, Michigan landscape supply