• Richmond KY Sand Delivery - Mulch Mound
  • Richmond KY Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Rich Riley
Rich Riley
Google Review

Highest compliments. Great driver.
Website is easy to navigate. Just a seamless process. 5 stars!!

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, or half that at 2 inches, which is the typical range for paver joint fill or bedding prep. For mortar mixing, sizing depends more on your mix ratio than square footage, so estimate by the batch and order a bit extra since running short mid pour is worse than having leftover sand. Most residential paver or pool base jobs in Richmond run somewhere between 1 and 3 cubic yards.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Richmond Sand Delivery

Richmond Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Rich Riley
Rich Riley
Google Review

Highest compliments. Great driver.
Website is easy to navigate. Just a seamless process. 5 stars!!

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, or half that at 2 inches, which is the typical range for paver joint fill or bedding prep. For mortar mixing, sizing depends more on your mix ratio than square footage, so estimate by the batch and order a bit extra since running short mid pour is worse than having leftover sand. Most residential paver or pool base jobs in Richmond run somewhere between 1 and 3 cubic yards.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Richmond Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Hannah
Hannah

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

Google Review
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review

Complete Your Outdoor Project

Mason sand pairs with crushed limestone base or chip stone for paver projects, since Richmond crews increasingly use chip stone under pavers instead of sand bedding because it does not pump out over time. If you are mixing mortar, you will also want portland cement on hand. Pool installers often order sand alongside a geotextile fabric layer to keep the base stable under Kentucky's freeze thaw cycles.

Richmond Soil Delivery
Richmond Mulch Delivery
Map of the sand delivery area around Richmond, Kentucky

Service area

Areas we deliver sand in Richmond, Kentucky

See All Locations
Mulch Mound Pro Tip

Mason sand looks similar to construction sand bagged at hardware stores, but it is screened finer and more uniform, which is what makes mortar workable and keeps paver joints from clumping. If you are mixing mortar by hand in Richmond's humidity during summer, work in smaller batches, since the fine grain holds moisture and can set faster than you expect once cement is added.

Mulch Mound Pro Tip

A common mistake on paver jobs is using mason sand as the base bedding layer under the pavers themselves. It shifts and pumps out over time, especially with Richmond's silt clay subgrade moving through freeze and thaw. Chip stone bedding has replaced sand for that role on most modern jobs, so save your mason sand for joint fill and mortar work where its fine texture actually matters.

Mulch Mound Pro Tip

If your project needs both mason sand and a base material like crushed stone, order them together for the same delivery window rather than two separate trips. It saves on truck time and gets your whole base system on site before your crew starts, which matters most during Richmond's busy spring and fall hardscape season when schedules fill up fast.

Working With Sand in Richmond

Richmond sits on silt clay soil that holds water and turns sticky when wet, which is exactly the kind of ground that makes on site sand mixing a mess. Masons working near Fort Boonesborough and through the older parts of town still spec mason sand for its consistency in mortar, since a coarser or dirtier sand throws off the mix. Pool installers and paver crews use it for base leveling before compacted stone goes down. In zone 6b, most of this work gets scheduled around the frost dates, since wet cold clay is no place to set pavers or pour mortar.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is mason sand actually used for on a typical Richmond job?

It is mainly used for mixing mortar, filling paver joints, and building pool bases. Its finer, more uniform grain is what makes mortar mix workably and spread evenly, unlike coarser construction sand. Some Richmond masons still call it mason sand, which is the same material as what is sold elsewhere as sand for jointing and mixing.

Answer

How much sand do I need for a paver patio?

One cubic yard covers about 324 square feet at 1 inch deep, which is a common joint fill depth. If you are using it as a bedding layer at 2 inches, plan on about 162 square feet per yard. Most residential patios need 1 to 2 cubic yards depending on size.

Answer

When is the best time to schedule sand delivery in Richmond?

Hardscape and masonry work runs heaviest from spring through fall once the ground has dried out past the last frost around April 15. Working mortar or setting pavers on frozen or waterlogged silt clay soil causes problems, so most crews avoid winter installs and order sand once conditions firm up.

Answer

Where will the sand be dropped on my property?

The driver places the pile in an accessible spot you choose at checkout, typically a driveway or a clear area near your work site. Make sure the drop zone is reachable by a delivery truck and free of obstructions like low branches or parked cars before the scheduled day.

Answer

Should I use mason sand or chip stone under my pavers?

Many Richmond installers have moved to chip stone for paver bedding because it locks together and does not pump out the way sand can over time, especially with our clay subgrade. Mason sand still makes the most sense for joint fill between pavers and for mortar mixing, where its fine texture is actually an advantage.

More delivery around Richmond, Kentucky

All Richmond, Kentucky landscape supply