About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

One of the easiest customer service experiences I've had in a long time! Mulch Mound made it so simple. After putting it off for a while, I looked at the weather and knew I needed to get to mulching ASAP before the rain came if I didn't want to wait another week. I put my orde...

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, which is the typical range for mortar mixing and joint work. If you are bedding a paver patio at closer to 2 inches, plan on roughly half that coverage per yard. Most residential jobs in Rocky Mount, a patio, a pool deck edge, a small mortar batch, run somewhere between a half yard and two yards.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Rocky Mount Sand Delivery

Rocky Mount Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

One of the easiest customer service experiences I've had in a long time! Mulch Mound made it so simple. After putting it off for a while, I looked at the weather and knew I needed to get to mulching ASAP before the rain came if I didn't want to wait another week. I put my orde...

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, which is the typical range for mortar mixing and joint work. If you are bedding a paver patio at closer to 2 inches, plan on roughly half that coverage per yard. Most residential jobs in Rocky Mount, a patio, a pool deck edge, a small mortar batch, run somewhere between a half yard and two yards.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Rocky Mount Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Mason sand is often ordered alongside crushed stone or gravel for a compacted paver base, since sand alone will not support long term loads. If you are leaning away from sand for paver joints, chip stone is worth pairing since it resists the pumping and washout that sand can develop over time. For mortar work, you will just need the sand itself along with your cement and lime.

Map of the sand delivery area around Rocky Mount, North Carolina

Service area

Areas we deliver sand in Rocky Mount, North Carolina

Mulch Mound Pro Tip

Mason sand is finer and more uniform than concrete sand, which is exactly why it mixes into a workable mortar instead of a gritty, crumbly one. If you are repointing brick near an older structure like Rocky Mount Mills, stick with mason sand specifically, concrete sand grain size will not bond the same way and can weaken the joint over time.

Mulch Mound Pro Tip

A common mistake is using mason sand as paver bedding and expecting it to stay put. It compacts loosely and can pump up through joints during freeze thaw cycles, especially with Rocky Mount's occasional hard winter frost. If you want long term joint stability, look at chip stone instead, it locks together and does not migrate the way sand does.

Mulch Mound Pro Tip

Because hardscape work here peaks spring through fall, ordering your full quantity up front rather than in smaller batches saves you from mismatched sand color or grain consistency between deliveries. Buying the full yardage in one order also means you are not paying for multiple delivery trips on a single project.

Working With Sand in Rocky Mount

Rocky Mount sits on sandy loam already, so the ground here drains fast and does not hold water the way clay soils do further west. That native sand content is actually why mason sand works so well for local hardscape projects, it blends into the same conditions builders are already working with. Around Rocky Mount Mills and the older brick construction nearby, mason sand still gets specified for repointing and mortar work. For paver joints and pool base leveling, plenty of contractors here are shifting to chip stone instead, since mason sand can wash out and pump under freeze thaw cycles.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same thing as regular sand from a bag at the hardware store?

No, mason sand is washed and finely screened specifically for consistent grain size, which is what makes it workable for mortar mixing. Bagged play sand or all purpose sand is coarser and less consistent, and it will not perform the same in a mortar mix or a precise leveling application.

Answer

How much mason sand do I need for a small paver patio?

One cubic yard covers about 324 square feet at a 1 inch depth. At the 2 inch depth more common for paver bedding, plan on closer to 160 square feet per yard. Measure your patio square footage first and we can help you land on the right yardage.

Answer

What time of year should I schedule sand delivery in Rocky Mount?

Spring through fall is when most hardscape and mortar work happens here, since the ground is workable and there is no frost to deal with. First frost typically hits around October 25, so wrapping up outdoor mortar work before then gives it time to cure properly.

Answer

Where will the sand be dropped off on delivery day?

You choose the spot, a driveway, the edge of your yard, wherever the truck can access safely. Just make sure the area is clear and reachable for a delivery vehicle, and schedule your date at checkout, we do not require a phone call to arrange it.

Answer

Should I use mason sand or chip stone for my paver joints?

Mason sand has long been standard for paver joints, but many contractors are shifting to chip stone because it locks together and resists washout and pumping, especially through freeze thaw seasons. Mason sand is still the right call for mortar mixing, but for joint fill specifically, chip stone is worth considering.

More delivery around Rocky Mount, North Carolina

All Rocky Mount, North Carolina landscape supply