• San Angelo TX Sand Delivery - Mulch Mound
  • San Angelo TX Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Brachie Zehnwirth
Brachie Zehnwirth
Google Review

I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

One cubic yard covers about 324 square feet at a 1 inch depth, so a typical paver joint job or thin mortar prep layer does not need much material. For pool base work or deeper bedding at 2 inches, figure closer to 160 square feet per yard. Measure your square footage first, then decide on depth based on whether you are filling joints, setting a base, or mixing mortar batches.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

San Angelo Sand Delivery

San Angelo Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Brachie Zehnwirth
Brachie Zehnwirth
Google Review

I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

One cubic yard covers about 324 square feet at a 1 inch depth, so a typical paver joint job or thin mortar prep layer does not need much material. For pool base work or deeper bedding at 2 inches, figure closer to 160 square feet per yard. Measure your square footage first, then decide on depth based on whether you are filling joints, setting a base, or mixing mortar batches.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of San Angelo Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Hannah
Hannah

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

Google Review

Complete Your Outdoor Project

Mason sand is often ordered alongside crushed base material for paver projects, with the base going down first and sand filling joints or bedding on top. If you are mixing mortar for repair work, pair it with bagged cement rather than trying to source both bulk. For pool decks, a compacted base layer under the sand keeps things from settling unevenly after our seasonal rains.

San Angelo Soil Delivery
San Angelo Mulch Delivery
Mulch Mound Pro Tip

For mortar mixing in San Angelo's heat, work in smaller batches than you would in cooler climates, sand and mortar mix set up faster once temperatures climb past 90 degrees. Keep the pile shaded or lightly damp if it sits more than a day before use, dried out mason sand loses some of its workability and can make mortar harder to trowel smoothly on repair or repointing jobs.

Mulch Mound Pro Tip

A common mistake with paver joint sand is sweeping it in dry and calling it done. Water it in lightly after sweeping to settle grains into the joints, then add a second pass. Skipping this step means joints open back up within a season, especially with the freeze thaw cycles this area gets between November and March.

Mulch Mound Pro Tip

If you are bedding pavers, consider whether chip stone makes more sense than sand for your project, it locks in place and will not pump up through joints the way sand can after heavy rain. Sand still makes sense for mortar mixing and pool base work where its fine, uniform grain is actually the point, so match the material to the specific job rather than defaulting to one product for everything.

Working With Sand in San Angelo

San Angelo sits on clay loam soil, which is not the sand's job to fix, this material stays on top as a working surface or bedding layer rather than a soil amendment. Around here it shows up most on masonry jobs tied to the area's stone and stucco building tradition, think mortar for repair work near Fort Concho style construction, plus pool decks and paver patios that hold up through our hot, dry summers. Because the climate swings from triple digit summers to occasional hard freezes near the Nov 4 to Mar 15 frost window, a well compacted sand base matters for anything that needs to resist heaving. Some crews here are shifting paver bedding over to chip stone since it does not pump the way sand can under repeated freeze thaw or heavy rain events.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is mason sand actually used for on a typical San Angelo project?

Most orders here go toward mortar mixing for masonry and stone repair work, paver joint fill, and pool base layers. It is washed and finely screened, which gives mortar the workability that coarser concrete sand does not. It is less common now as full paver bedding since chip stone handles that job without pumping.

Answer

How many cubic yards do I need for a paver patio?

One cubic yard covers about 324 square feet at 1 inch deep, which is typical for joint fill. If you are using it as a full bedding layer at 2 inches, plan on roughly 160 square feet per yard instead. Measure your patio square footage first and match it to the depth you are installing.

Answer

When is the best time to install sand for a paver or pool project?

Spring through fall is when most hardscape work happens here, once you are past the Mar 15 last frost date and before things get too far into November. Working in cooler shoulder season months also helps mortar mixes set at a manageable pace instead of flashing off too fast in peak summer heat.

Answer

Where will the sand be dropped and do I need to prep anything?

The load gets placed at a driveway or curbside spot you specify, the truck does not drive across lawns or landscaping. Clear a path wide enough for delivery access and put down a tarp or plywood first if you want to protect concrete or asphalt from staining.

Answer

Should I use mason sand or chip stone for my paver patio?

Chip stone has become the more common choice for paver bedding since it locks in place and does not pump up through joints over time. Mason sand still works well for joint fill on top, and it is the right call for mortar mixing or pool base work where its fine, uniform texture is actually needed.

More delivery around San Angelo, Texas

All San Angelo, Texas landscape supply