About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

The website to order is super easy to use. Pick a mulch, date/time/driveway location of the delivery and that’s it. A few days later there was a nice mound of mulch in my driveway. Great service - just as promised.

At a 1 inch depth, one cubic yard of this sand covers roughly 324 square feet, so a typical paver patio or pool deck base takes anywhere from half a yard to a couple of yards depending on footprint. Mortar mixing jobs use far less per square foot of finished wall, so order based on batches needed rather than area. Measure your project area first, then work backward from the 1 to 2 inch install depth to land on a yardage figure.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Sandusky Sand Delivery

Sandusky Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

The website to order is super easy to use. Pick a mulch, date/time/driveway location of the delivery and that’s it. A few days later there was a nice mound of mulch in my driveway. Great service - just as promised.

At a 1 inch depth, one cubic yard of this sand covers roughly 324 square feet, so a typical paver patio or pool deck base takes anywhere from half a yard to a couple of yards depending on footprint. Mortar mixing jobs use far less per square foot of finished wall, so order based on batches needed rather than area. Measure your project area first, then work backward from the 1 to 2 inch install depth to land on a yardage figure.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Sandusky Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

This sand pairs naturally with paver base gravel or crushed stone for a proper two layer hardscape foundation, and with bagged cement or lime for anyone mixing mortar on site. If your project is a pool install, a clean stone base is worth asking about too, since it holds up better long term than pure sand under Sandusky's freeze and thaw cycles.

Map of the sand delivery area around Sandusky, Ohio

Service area

Areas we deliver sand in Sandusky, Ohio

Mulch Mound Pro Tip

If you are mixing mortar for brick or block repair on an older Sandusky home, keep this sand dry until you are ready to batch it. Damp sand throws off your water to cement ratio and makes the mix inconsistent from batch to batch. Store it under a tarp on a pallet, not directly on wet ground, especially during the wetter spring weeks before last frost on April 25.

Mulch Mound Pro Tip

A common mistake on paver jobs is screeding this sand too thick, thinking more bedding means more stability. In practice, 1 inch compacted evenly under the pavers is plenty, and excess depth just gives the joints room to shift and settle unevenly once foot traffic and Ohio's freeze thaw cycle get to work on it.

Mulch Mound Pro Tip

If you're building a pool base or a larger patio, consider whether chip stone makes more sense than sand for the bedding layer. Sand is still the standard for mortar and fine paver joint work, but stone resists pumping and washout better over time, which matters given how much rain and snowmelt this region sees between October and April.

Working With Sand in Sandusky

Sandusky sits on silt loam soil, which drains slower than sand and holds moisture through the spring thaw, so a lot of hardscape work here happens on top of a sand or stone base rather than depending on the native soil. With Cedar Point pulling steady tourist traffic through town, homeowners and contractors are constantly building or repairing patios, walkways, and pool decks that need a stable, well drained bedding layer. This sand's fine, uniform grain is what makes mortar workable for the brick and block work common on older Sandusky homes near the lakefront.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand I'd find at a hardware store in Sandusky?

Yes, this is washed and finely screened mason sand, the same grade used for mortar mixing and paver joints. It is finer and more uniform than concrete sand, which is what makes it workable for mortar and tight enough to lock into paver joints without leaving gaps.

Answer

How much sand do I need for a paver patio?

One cubic yard covers about 324 square feet at a 1 inch depth, which is the typical bedding thickness for pavers. Measure your patio footprint, decide on 1 or 2 inches depending on your base design, and use that to size your order. Joint filling on top of that uses a much smaller amount.

Answer

When is the best time to do sand and paver work in Sandusky?

Spring through fall is the practical window, once ground has thawed past last frost around April 25 and before the ground starts freezing again near October 30. Working outside that window risks the sand base shifting as the ground freezes and thaws underneath it before it has had time to settle.

Answer

Where will the sand be placed when it's delivered?

The driver places the load wherever you direct at your address, usually a driveway, curb, or staging area close to your project site. Clear the drop spot ahead of time and let us know if access is tight, since a full truck needs reasonable clearance to maneuver and dump safely.

Answer

Should I use sand or crushed stone for my paver base?

Sand still works well for mortar and joint filling, but for the structural bedding layer under pavers, many contractors are shifting to clean chip stone because it resists pumping and washout better over time. If your project is joints or mortar specifically, sand remains the right call.

More delivery around Sandusky, Ohio

All Sandusky, Ohio landscape supply