About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most structural fill jobs run 6 to 12 inches deep depending on how much you're raising the grade. Measure the low area in square feet, decide your target depth, and order in cubic yards from there, rounding up rather than down since a short load means a return trip.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Sheboygan Fill Dirt Delivery

Sheboygan Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most structural fill jobs run 6 to 12 inches deep depending on how much you're raising the grade. Measure the low area in square feet, decide your target depth, and order in cubic yards from there, rounding up rather than down since a short load means a return trip.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Sheboygan Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill jobs in Sheboygan get capped with a few inches of topsoil once the grade is set, especially if grass or beds are going back in over the spot. If the area needs to shed water fast, some contractors add a layer of coarse gravel underneath the fill for drainage before backfilling. Either way, plan those materials as a separate order sized to the same footprint.

Mulch Mound Pro Tip

Don't dump fill dirt in one deep pour. Spread it in lifts of 6 to 8 inches and compact each one with a plate compactor or hand tamper before adding the next layer. Skip this in Sheboygan's clay loam and the fill will settle unevenly over a season or two, especially once frost works into it. It takes longer up front but it's the difference between a stable pad and a sunken spot you're patching again next spring.

Mulch Mound Pro Tip

The most common mistake with fill dirt around here is treating it like topsoil and trying to plant directly into it. It's subsoil, low in organic matter and dense once compacted, so grass and plants struggle in it. Always cap finished fill with 4 to 6 inches of actual topsoil before seeding or planting anything, even if it adds a step to the project.

Mulch Mound Pro Tip

If you're filling a large low spot, pair fill dirt with a cheaper coarse base material for the bulk of the depth and save the fill for the top few inches near finish grade. It cuts material cost on big jobs and still gives you a stable, compactable surface. This matters more on lakeside lots here where drainage below grade is already sluggish.

Grading and Filling in Sheboygan

Sheboygan sits on clay loam that already drains slowly, so any low spot near a foundation, patio, or pool pad tends to stay wet longer than people expect. Fill dirt is the fix for that, it's a structural base, not something you plant into, and it needs to go down in compacted lifts so it doesn't settle unevenly over the next few winters. With frost reaching deep by the time temperatures drop in late October, uncompacted fill here can heave or settle badly through freeze-thaw cycles. Get the grade right before the ground freezes and you avoid redoing it in spring.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Can I use fill dirt to grow grass or plants directly in it?

Not directly. Fill dirt is subsoil meant for structural grading, not a growing medium, and it's too dense and low in nutrients for healthy root growth. Cap it with 4 to 6 inches of topsoil once your grade is set and compacted, then plant into that layer instead.

Answer

How many cubic yards do I need to raise a 200 square foot low spot by 8 inches?

At 6 inches, one cubic yard covers about 54 square feet, so for 8 inches you'd figure roughly 40 square feet per yard. For 200 square feet at that depth, plan on around 5 cubic yards, then round up slightly to cover compaction settling.

Answer

When is the best time to bring in fill dirt before winter hits?

Aim to finish grading and compacting before the ground starts to freeze, typically by mid October in Sheboygan. Working the fill in while the soil is still workable lets it compact properly, and doing it after frost sets in gets a lot harder and less reliable.

Answer

Where will the delivery truck place the load, and what do I need to clear?

The truck drops the load at your driveway or the nearest spot it can safely access, so clear a path wide enough for a full size delivery vehicle and mark the exact drop spot ahead of time. If your access is tight or on a slope, mention it when you schedule so the driver can plan accordingly.

Answer

Should I get fill dirt or a mix of fill and gravel for backfilling around my foundation?

Straight fill dirt works fine for general grading and raising low areas. If you're backfilling against a foundation or need faster drainage, a gravel base layer under the fill helps move water away from the structure, which matters in Sheboygan's slower draining clay loam. Either approach should still be capped and compacted properly.

More delivery around Sheboygan, Wisconsin

All Sheboygan, Wisconsin landscape supply