• Sidney OH Sand Delivery - Mulch Mound
  • Sidney OH Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicholas Thom
Nicholas Thom
Google Review

So Easy!
So Cheap!
So doing this again next year!

At a 1 inch install depth, one cubic yard covers about 324 square feet, and at 2 inches that drops to roughly 162 square feet, so depth changes your order fast. For mortar mixing or small paver joint jobs you are usually working in fractions of a yard, while pool base prep or larger patios can call for two or three yards depending on footprint. Measure your project area first, then decide on depth before ordering.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Sidney Sand Delivery

Sidney Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicholas Thom
Nicholas Thom
Google Review

So Easy!
So Cheap!
So doing this again next year!

At a 1 inch install depth, one cubic yard covers about 324 square feet, and at 2 inches that drops to roughly 162 square feet, so depth changes your order fast. For mortar mixing or small paver joint jobs you are usually working in fractions of a yard, while pool base prep or larger patios can call for two or three yards depending on footprint. Measure your project area first, then decide on depth before ordering.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Sidney Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Tracy Bly
Tracy Bly

Very happy with the ease of ordering. Delivery went exactly as planned. Garden soil looks great and couldn’t be happier.

Google Review
Eric Waller
Eric Waller

The website to order is super easy to use. Pick a mulch, date/time/driveway location of the delivery and that’s it. A few days later there was a ni...

Read full review

The website to order is super easy to use. Pick a mulch, date/time/driveway location of the delivery and that’s it. A few days later there was a nice mound of mulch in my driveway. Great service - just as promised.

Google Review

Complete Your Outdoor Project

Sand pairs naturally with paver base stone and edging on walkway or patio jobs, and with mortar mix and brick if you are doing tuckpointing on one of Sidney's older brick structures. Some crews are shifting to clean chip stone instead of sand for paver bedding since it does not pump moisture up through joints, worth asking about if that is your project. For pool installs, sand often gets ordered alongside a gravel base layer.

Sidney Soil Delivery
Sidney Mulch Delivery
Map of the sand delivery area around Sidney, Ohio

Service area

Areas we deliver sand in Sidney, Ohio

See All Locations
Mulch Mound Pro Tip

If you are mixing mortar for brick repair on an older Sidney building, do not substitute concrete sand even though it looks similar in the pile. Mason sand is screened finer and more uniform, which is what keeps the mix workable enough to tool joints cleanly. Concrete sand has coarser particles that make mortar gritty and harder to strike, especially noticeable on tuckpointing work where joint appearance matters.

Mulch Mound Pro Tip

A common mistake with paver joint sand is sweeping it in dry and calling it done. Water it in lightly after sweeping so it settles into the joints, then sweep a second pass and water again. Skipping this step leaves voids that let joints shift and weeds establish over a season, particularly with the freeze thaw cycles Sidney sees between fall and spring.

Mulch Mound Pro Tip

If your project is paver bedding rather than mortar or pool base, ask about clean chip stone before you order sand. It has become the more common choice for bedding layers because it will not pump up through joints under load the way sand can, and it drains better in clay loam soils like Sidney's that hold surface water after heavy rain.

Working With Sand in Sidney

Sidney sits on clay loam that compacts hard and drains poorly after the spring rains that run through May, which is exactly why sand shows up so often in drainage and base work here. Around Courthouse Square and the older neighborhoods nearby, a lot of the hardscaping is brick and paver walkways that need a stable, well graded bedding layer under freeze thaw cycles typical of zone 6a. Mortar work for tuckpointing and masonry repair on the area's older brick buildings also depends on this finer sand rather than coarser concrete sand. It is a material bought for a specific job, not for spreading across a yard.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same sand used for mortar and paver joints, or do I need different types?

This is washed, finely screened sand suited for both mortar mixing and paver joints, since the fine uniform grain is what makes mortar workable and joint sand settle properly. If your project is paver bedding rather than joints, ask about clean chip stone, which has largely replaced sand for that use because it does not pump moisture.

Answer

How much sand do I need for a small paver patio in Sidney?

One cubic yard covers about 324 square feet at a 1 inch depth, or roughly 162 square feet at 2 inches. Most paver joint work only needs a thin top dressing, so measure your patio square footage and calculate at the shallower depth first before rounding up.

Answer

Is there a bad time of year to have sand delivered in Sidney?

Sand itself is not weather sensitive, but hardscape season here runs spring through fall, so most crews order when ground conditions are workable and not frozen or saturated. With last frost around May 14 and first frost by October 3, that window is your practical construction season for paver and masonry jobs.

Answer

Where will the sand be placed when it is delivered?

The load is placed wherever you specify at checkout, typically a driveway or staging area near your project. Make sure the spot is clear and accessible for a delivery truck, and let us know if you need protection like plywood or a tarp under the pile to protect existing pavement.

Answer

Should I use sand or clean chip stone for my paver base?

For paver bedding specifically, many crews now choose clean chip stone over sand because it resists pumping moisture up through joints over time. Sand still makes sense for mortar mixing, paver joint filling, and pool base prep, where its fine uniform grain is actually the point.

More delivery around Sidney, Ohio

All Sidney, Ohio landscape supply