About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

One cubic yard of mason sand covers roughly 324 square feet at a 1 inch depth, so a small paver patio or a mortar mixing job for a stone veneer project usually only needs a fraction of a yard. For joint filling or a 2 inch bedding layer, cut that coverage number roughly in half. We sell by the cubic yard, so measure your square footage first and work backward from there.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

St. Joseph Sand Delivery

St. Joseph Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

One cubic yard of mason sand covers roughly 324 square feet at a 1 inch depth, so a small paver patio or a mortar mixing job for a stone veneer project usually only needs a fraction of a yard. For joint filling or a 2 inch bedding layer, cut that coverage number roughly in half. We sell by the cubic yard, so measure your square footage first and work backward from there.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of St. Joseph Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Mason sand pairs with pavers, natural stone, and mortar mix for anyone building a patio, walkway, or veneer wall. Some St. Joseph crews are shifting paver bedding over to clean chip stone since it won't pump up through the joints over time, worth asking your contractor which base they prefer before you order. Either way, having extra sand on hand for joint touch ups later saves a second delivery.

Map of the sand delivery area around St. Joseph, Missouri

Service area

Areas we deliver sand in St. Joseph, Missouri

Mulch Mound Pro Tip

Mason sand is unwashed of clay and silt but still fine grained, so it holds moisture longer than concrete sand. In St. Joseph's clay heavy yards, don't stockpile it directly on bare ground before a rain, it'll pick up mud from splashback and contaminate the pile. Set it on a tarp or pallet if it's sitting more than a day or two before you use it for mortar mixing.

Mulch Mound Pro Tip

A common mistake here is using mason sand as paver bedding in a driveway or high traffic walkway. It's excellent for joint filling but too fine to resist pumping and washout under repeated loads, especially with our clay subgrade holding water near the surface. For structural bedding, ask about chip stone instead and save the mason sand for the joints themselves.

Mulch Mound Pro Tip

If you're doing both mortar work and paver joints on the same job, order mason sand as one delivery instead of buying bagged sand twice from a store. A cubic yard goes a long way for joint filling, so many St. Joseph customers split one load between a small patio and touch up work on an older walkway, rather than ordering twice.

Working With Sand in St. Joseph

St. Joseph sits on heavy clay, which means most of our calls for mason sand come from people building something on top of the ground rather than fighting the ground itself, patios, walkways, mortar beds for stone veneer. Clay doesn't drain sand joints well, so pros here often over excavate a bit more than a sandy soil city would need. With the growing season stretching from late April to mid October, most masonry and paver work gets packed into that window before the ground starts working against you again. Fine washed sand stays consistent whether it's going into a mortar mix or bedding a paver base.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as what people call mason sand down south?

Yes, mason sand is the standard name here too. It's washed and finely screened, the same material used for mortar mixing and paver joints regardless of what region calls it. We use mason sand and mortar sand interchangeably since that's what most St. Joseph contractors ask for by name.

Answer

How many cubic yards do I need for a small paver patio?

For joint filling on a 200 square foot patio, you're typically well under a quarter cubic yard since joints only need a shallow fill, not full coverage. If you're also mixing mortar for a stone veneer accent, add a bit more. One cubic yard covers about 324 square feet at 1 inch, so most patio jobs use a fraction of that.

Answer

What's the best time of year to do paver or mortar work in St. Joseph?

Spring through fall is the practical window here, roughly after the last frost around April 20 and before the first frost around October 10. Mortar cures poorly in freezing temperatures, and most masons in the area avoid pouring or setting stone once nighttime temps start dropping in late fall.

Answer

Where will the sand be dropped and do I need to be there?

The driver places the load at a spot you designate at checkout, usually a driveway, alley, or staging area close to your project. Someone doesn't need to be present the entire time, but access needs to be clear, gates unlocked, and enough space for the truck to maneuver and dump safely.

Answer

Should I use mason sand or chip stone under my pavers?

For paver joints, mason sand is still the standard choice because of its fine, uniform grain. For the bedding layer underneath the pavers, many St. Joseph installers now prefer clean chip stone since it doesn't pump or wash out the way sand can, especially over our area's heavy clay subgrade.

More delivery around St. Joseph, Missouri

All St. Joseph, Missouri landscape supply