• St. Petersburg FL Sand Delivery - Mulch Mound
  • St. Petersburg FL Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Ryan Cully
Ryan Cully
Google Review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, which is the typical install range for joint filling and bedding work. For deeper applications closer to 2 inches, plan on roughly half that coverage per yard. Measure your paver or mortar area first, then work backward from there to figure your yard count.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

St. Petersburg Sand Delivery

St. Petersburg Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Ryan Cully
Ryan Cully
Google Review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, which is the typical install range for joint filling and bedding work. For deeper applications closer to 2 inches, plan on roughly half that coverage per yard. Measure your paver or mortar area first, then work backward from there to figure your yard count.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of St. Petersburg Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review
Lindsay Mangan
Lindsay Mangan

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will de...

Read full review

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!

Google Review

Complete Your Outdoor Project

Most orders for mason sand around St. Petersburg pair with pavers, natural stone, or pool coping going in at the same time. Some jobs also call for a base layer of crushed stone or road base underneath before the sand joint work happens. If you are mixing mortar on site, portland cement and a mixer round out the list.

St. Petersburg Soil Delivery
St. Petersburg Mulch Delivery
Map of the sand delivery area around St. Petersburg, Florida

Service area

Areas we deliver sand in St. Petersburg, Florida

See All Locations
Mulch Mound Pro Tip

Mason sand's fine, uniform grain is what makes mortar workable in Florida heat, coarser sand fights the trowel and sets up inconsistently. Keep it dry and covered until you are ready to mix, humidity here means bagged or piled sand pulls moisture fast, and wet sand throws off your water to cement ratio. If you are mixing on a hot afternoon, work in smaller batches so the mortar does not stiffen before you place it.

Mulch Mound Pro Tip

A common mistake is using mason sand as paver bedding the way it used to be done. It is being phased out for that role in favor of clean chip stone, which locks together and does not pump water and fines up through the joints during our heavy summer rain. Save mason sand for the actual joint fill and mortar work, not the base layer, and your pavers will stay flatter longer.

Mulch Mound Pro Tip

If your project needs both bedding stone and mason sand, order them on the same delivery to save a trip and keep your work area organized in one visit. Since sand is sold by the yard and used thin, it is easy to underorder, add a small buffer, maybe a quarter yard, for spillage and compaction loss rather than running short mid job.

Working With Sand in St. Petersburg

St. Petersburg already sits on sandy native soil, so this material is not fighting the ground, it is finishing what the ground started. Mason sand's job here is precision work, mortar that needs to stay workable in our heat and humidity, paver joints that need to lock tight, pool bases that need a level, uniform bed. With the city's low elevation near 36 feet and a long warm building season, contractors and homeowners alike are working hardscape projects most of the year rather than a short spring window.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is mason sand actually used for in a St. Petersburg backyard project?

Mason sand is used for mortar mixing, filling paver joints, and building level pool bases. It is finer and more uniform than concrete sand, which is exactly what makes it workable for mortar and precise for joint fill on patios, walkways, and pool decks around the city.

Answer

How many yards of mason sand do I need for a paver patio?

One cubic yard covers about 324 square feet at a 1 inch depth, which covers most paver joint work. Measure your patio's square footage, decide your fill depth between 1 and 2 inches, and divide accordingly, most residential patios need well under a full yard for joints alone.

Answer

Does St. Petersburg's humidity affect installing mason sand?

Yes, humidity and heat make mason sand pull moisture quickly, which can throw off mortar mixes if the sand sits out uncovered. Keep it covered or tarped between delivery and use, and mix mortar in smaller batches during peak summer heat so it does not stiffen before you can place it.

Answer

Where will the delivery truck place the sand on my property?

The driver places the load wherever you direct at a spot that is accessible for the truck, typically a driveway or curb area close to your work zone. Have that spot cleared and ready on delivery day since mason sand is heavy and best moved as few times as possible.

Answer

Should I use mason sand or chip stone for paver bedding?

For paver bedding specifically, chip stone is now the better choice since it locks together and will not pump up through joints during heavy rain, while mason sand is prone to washout in that role. Save mason sand for mortar mixing and joint fill, and use chip stone for the base layer underneath.

More delivery around St. Petersburg, Florida

All St. Petersburg, Florida landscape supply