About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

I contacted Mulch Mound for #57 river rocks and it was easy and fast to get a delivery right before the holiday weekend. Stone was delivered as promised and place exactly where I asked. Excellent service! I will be ordering mulch next!

At the standard 6 inch install depth, one cubic yard covers about 54 square feet, so a 300 square foot low area at that depth runs roughly 5.5 yards. If you're backfilling deeper, closer to 12 inches for a pool cavity or a real grade change, figure closer to half that coverage per yard and order accordingly. Measure length by width for the area, then decide your target depth before ordering since fill is sold by volume, not by the load.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Sterling Heights Fill Dirt Delivery

Sterling Heights Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

I contacted Mulch Mound for #57 river rocks and it was easy and fast to get a delivery right before the holiday weekend. Stone was delivered as promised and place exactly where I asked. Excellent service! I will be ordering mulch next!

At the standard 6 inch install depth, one cubic yard covers about 54 square feet, so a 300 square foot low area at that depth runs roughly 5.5 yards. If you're backfilling deeper, closer to 12 inches for a pool cavity or a real grade change, figure closer to half that coverage per yard and order accordingly. Measure length by width for the area, then decide your target depth before ordering since fill is sold by volume, not by the load.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Sterling Heights Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill jobs finish with a few inches of topsoil capping the surface, especially if grass or plants are going in over it, since fill dirt on its own won't support root growth. If the area will see foot traffic or a shed, a layer of compactable gravel underneath the fill can help stabilize things further. Straw or erosion blanket is worth having on hand too if the graded area sits exposed before seeding.

Mulch Mound Pro Tip

Fill dirt is not something you dump and walk away from. Place it in lifts of 6 to 8 inches and compact each layer with a plate compactor or hand tamper before adding the next. Skip this step and you'll be watching that spot sink for two or three years as it settles on its own, which is a common complaint we hear from people who filled a low spot themselves without a compactor.

Mulch Mound Pro Tip

Because Sterling Heights clay loam already drains slowly, don't grade your fill dirt flat if it's near a foundation or patio. Slope it slightly away from the structure, even an inch or two over several feet makes a real difference once the ground freezes and settling shifts things around. Fill dirt with no slope just becomes a new spot for water to pool.

Mulch Mound Pro Tip

If you're capping fill dirt with topsoil for grass or a garden bed, order the topsoil as a separate, thinner layer rather than trying to blend the two. Two to three inches of topsoil over well compacted fill is usually enough for turf establishment, and keeping them separate means you're not wasting good topsoil mixed into structural fill where it won't help anything grow.

Grading and Filling in Sterling Heights

Sterling Heights sits on clay loam that drains slowly, so low spots near foundations and along fence lines tend to hold water well into spring. Fill dirt is the tool for correcting that grade before it becomes a drainage problem, not a growing medium, it's meant to be compacted and built up in layers. With the frost line reaching down through winter here, poorly compacted fill can heave and settle unevenly once the ground freezes and thaws again. Projects like pool removals, foundation backfill, and yard leveling around The Heights all lean on this material to get the base right first.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Can I use fill dirt to grow grass or plants directly in it?

Not directly, fill dirt is subsoil meant for structural buildup, not root growth. Cap it with a few inches of topsoil once it's compacted and graded, that's where grass seed or plants should actually go. Skipping the topsoil layer usually means poor germination and thin, patchy growth.

Answer

How many yards do I need to fill in an old pool area?

It depends on the pool's depth and footprint, but a typical above ground pool removal in this area runs somewhere between 15 and 30 cubic yards to backfill properly in compacted lifts. Measure the pit's volume roughly and add extra for compaction, since loose fill settles noticeably once tamped down.

Answer

What time of year should I have fill dirt delivered around here?

Fill dirt work isn't tied to a season the way planting is, it's driven by the job. That said, working before ground freeze in October is easier than trying to compact frozen or waterlogged clay loam in winter, and spring thaw can leave the ground too soft to compact well until it dries out some.

Answer

Where will the delivery truck place the load, and do I need to be home?

You'll specify the drop location, usually the driveway or curb, at checkout, and the truck delivers there directly. You don't need to be home, but make sure the spot is clear and accessible, since these trucks are heavy and need solid, unobstructed ground to unload safely.

Answer

Should I get fill dirt or topsoil for leveling my yard?

If you're raising the grade more than a couple inches, fill dirt is the right call since it's cheaper by volume and meant for bulk buildup. Topsoil should go on top as a thin finishing layer if anything needs to grow there. Using topsoil alone for major grade changes wastes a growing medium on a job that doesn't need one.

More delivery around Sterling Heights, Michigan

All Sterling Heights, Michigan landscape supply