• Stillwater OK Sand Delivery - Mulch Mound
  • Stillwater OK Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, so a typical 10 by 10 patio joint fill or mortar batch rarely needs more than a fraction of a yard. For mortar mixing, order based on your mix ratio and total block or stone count rather than square footage. Most residential jobs in Stillwater land between a quarter yard and one full yard depending on the scope.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Stillwater Sand Delivery

Stillwater Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, so a typical 10 by 10 patio joint fill or mortar batch rarely needs more than a fraction of a yard. For mortar mixing, order based on your mix ratio and total block or stone count rather than square footage. Most residential jobs in Stillwater land between a quarter yard and one full yard depending on the scope.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Stillwater Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review

Complete Your Outdoor Project

Most sand orders in Stillwater pair with paver base gravel or crushed limestone for the compacted foundation underneath, then the sand fills the joints on top. If you're mixing mortar for stone veneer or a retaining wall, cement and aggregate typically get delivered alongside it. Some homeowners are switching paver joints to chip stone instead, worth asking about if pumping sand out over time has been an issue.

Stillwater Soil Delivery
Stillwater Mulch Delivery
Map of the sand delivery area around Stillwater, Oklahoma

Service area

Areas we deliver sand in Stillwater, Oklahoma

See All Locations
Mulch Mound Pro Tip

Mason sand is finer and more uniform than concrete sand, which is exactly why it works for mortar, it blends smoothly and holds workability during the mix. But that same fineness means it isn't the best choice anymore for paver bedding under heavy foot traffic, since it can pump up through joints over time with rain and freeze thaw cycles. If you're doing new paver work in Stillwater's clay soil, ask about chip stone for the joints instead and save the mason sand for mortar.

Mulch Mound Pro Tip

A common mistake is ordering mason sand for a paver base layer instead of the joints only. The base under pavers needs compacted crushed stone, not sand, or you'll get settling within a season, especially in Stillwater's clay loam which already holds water and shifts. Keep sand thin, at the 1 to 2 inch depth range, and reserve it for mortar mixing or the final joint fill after pavers are set.

Mulch Mound Pro Tip

If you've got both a mortar job and a joint fill job coming up, order them together in one cubic yard delivery instead of two smaller trips, since mason sand stores fine in a covered pile or tarp for weeks without clumping badly as long as it stays dry. Pairing the delivery with your paver base gravel order on the same day also saves a second trip charge and gets everything staged before your hardscape crew or weekend project starts.

Working With Sand in Stillwater

Stillwater sits on clay loam soil that drains slowly and shifts with the wet spring and dry summer swings typical of zone 7a. That makes a stable base layer important for any paver patio or walkway, since native soil alone will heave a little over freeze thaw cycles between the April and October frost dates. Mason sand gives you a clean, uniform layer for joint fill or mortar work that isn't fighting the clay underneath. Around here it shows up most in mortar batches for stone work and in paver joints on patios near campus rentals and older neighborhoods alike.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is mason sand actually used for around Stillwater?

It's mainly used for mortar mixing on stone or block work and for filling joints between pavers on patios and walkways. Some pool installers also use it as a base layer. It's finer and more uniform than concrete sand, which is what makes it workable for mortar in particular.

Answer

How much sand do I need for a patio project?

One cubic yard covers about 324 square feet at a 1 inch depth, but most paver joint fills only need a thin layer, well under that. For a typical 200 to 300 square foot patio, a quarter to half a cubic yard is usually plenty depending on joint width.

Answer

When is the best time to install paver joints or mix mortar in Stillwater?

Spring through fall is peak hardscape season here, once you're clear of the last frost around April 17 and before the first frost hits around October 28. Working in that window means the ground isn't frozen and mortar cures properly without a cold snap interrupting it.

Answer

Where does the sand get dropped and do I need to be home?

You don't need to be home, just designate a clear spot like a driveway or the edge of your yard when you schedule delivery at checkout. Make sure the area is accessible for a delivery truck and free of parked cars or low branches, since sand is dumped in place rather than carried in.

Answer

Should I use mason sand or chip stone for paver joints?

Mason sand has long been standard for paver joints but it can pump up and wash out over time with rain, especially in clay soil areas like Stillwater. Chip stone is increasingly used instead because it locks in place and doesn't pump. Mason sand still makes sense if you're mixing mortar rather than filling joints.

More delivery around Stillwater, Oklahoma

All Stillwater, Oklahoma landscape supply