About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most projects run 6 to 12 inches depending on how much you are raising the grade. Measure the low area's length and width, decide your target depth, and order in cubic yards from there. For deeper fills, plan on placing it in lifts rather than one thick layer.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Terre Haute Fill Dirt Delivery

Terre Haute Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most projects run 6 to 12 inches depending on how much you are raising the grade. Measure the low area's length and width, decide your target depth, and order in cubic yards from there. For deeper fills, plan on placing it in lifts rather than one thick layer.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Terre Haute Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill jobs finish with a layer of topsoil on top if grass or plants are going in, since fill dirt itself is a structural base, not a growing medium. Some customers also order a bit of gravel for drainage at the low point before backfilling. If the finished area needs a lawn, budget for a topsoil cap after the fill has settled.

Map of the fill dirt delivery area around Terre Haute, Indiana

Service area

Areas we deliver fill dirt in Terre Haute, Indiana

Mulch Mound Pro Tip

Terre Haute's silt loam drains slower than sandy soils, so if your low spot holds water after rain, break up the native soil surface before dumping fill on top. Dropping dirt straight onto a hardpan or waterlogged base just traps moisture underneath, and you will see the same soggy spot resurface in a year or two. A few passes with a shovel or tiller first makes a real difference.

Mulch Mound Pro Tip

The most common mistake with fill dirt is dumping it all at once and calling it done. Place it in 6 to 8 inch lifts and compact each one with a plate compactor or by wetting and tamping before adding the next layer. Skip this step and the ground keeps settling for years, showing up as dips near foundations or low spots that reappear every spring thaw.

Mulch Mound Pro Tip

If you are filling a large area, pair fill dirt with a thinner topsoil cap rather than using topsoil for the whole depth. Topsoil is more expensive and it compacts poorly as a structural base, so using it only in the top few inches where roots actually grow gets you a stable yard without overpaying for material that is doing a job it is not built for.

Grading and Filling in Terre Haute

Terre Haute's native silt loam holds moisture and compacts unevenly, which is part of why so many yards near the Wabash develop low spots and soggy corners over time. Fill dirt gives you a stable base to correct that grading before anything else goes in. It is not a growing medium, so if the area needs sod or beds later, plan to cap it with topsoil. With a frost line that runs from mid October to mid April, most fill projects here get scheduled in the warmer stretch when the ground compacts predictably.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Is fill dirt the same as topsoil?

No, fill dirt is subsoil screened of debris and used as a structural base, while topsoil is a growing medium with organic content. If you are raising a grade, fill dirt does the heavy lifting underneath, and topsoil goes on top only where grass or plants need to grow.

Answer

How many cubic yards do I need to fill a low spot in my yard?

One cubic yard covers about 54 square feet at a 6 inch depth, so measure your area's square footage and divide by 54 for that depth, or adjust proportionally for deeper fills. Most yards here need 6 to 12 inches, so a 200 square foot low spot at 6 inches runs roughly 4 cubic yards.

Answer

When is the best time to bring in fill dirt in Terre Haute?

Fill dirt work is driven by the project, not the season, but most people schedule it between the last frost in mid April and first frost in mid October when the ground compacts predictably. Working fill during a freeze or a very wet stretch of silt loam makes compaction unreliable.

Answer

Can the truck get into a backyard or tight access area?

It depends on your driveway width and any gates or slopes on the property, our driver will place the load as close to the work area as access safely allows. Let us know ahead of delivery if access is tight so we can plan the drop location.

Answer

Should I use fill dirt or gravel for backfilling around my foundation?

Fill dirt works well for general backfill and raising grade, but gravel drains better right against a foundation wall where water needs to move away from the structure. A lot of Terre Haute jobs use a gravel base near the wall and fill dirt for the broader area being raised.

More delivery around Terre Haute, Indiana

All Terre Haute, Indiana landscape supply