• Terre Haute IN Sand Delivery - Mulch Mound
  • Terre Haute IN Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, so a small patio project or a mortar mixing job for a weekend crew rarely needs more than a yard or two. For paver joint filling, figure a much thinner layer, often a quarter inch or less, so a single yard can stretch across a large surface. At 1.35 tons per cubic yard, this is heavy material, so order close to what the job needs rather than rounding up out of habit.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Terre Haute Sand Delivery

Terre Haute Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, so a small patio project or a mortar mixing job for a weekend crew rarely needs more than a yard or two. For paver joint filling, figure a much thinner layer, often a quarter inch or less, so a single yard can stretch across a large surface. At 1.35 tons per cubic yard, this is heavy material, so order close to what the job needs rather than rounding up out of habit.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Terre Haute Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review

Complete Your Outdoor Project

Most jobs using this sand also need paver base or chip stone underneath it, especially since many Terre Haute installers are shifting to chip stone bedding instead of sand under the pavers themselves. If you are mixing mortar, you will also want cement on hand before the sand gets wet and starts to set up in the pile.

Terre Haute Soil Delivery
Terre Haute Mulch Delivery
Map of the sand delivery area around Terre Haute, Indiana

Service area

Areas we deliver sand in Terre Haute, Indiana

See All Locations
Mulch Mound Pro Tip

Because this sand is finer and more uniform than concrete sand, it mixes into mortar that stays workable longer on the trowel, which matters when you are pointing brick on an older Terre Haute building in mid summer heat. If you are using it for mortar, keep the pile covered between mixes so it does not pick up extra moisture from silt loam ground that tends to stay damp after rain.

Mulch Mound Pro Tip

A common mistake is using this material as paver bedding sand expecting it to behave like base material. It compacts fine but it can pump, meaning moisture works it up through the joints over freeze thaw cycles, which matters here given the swing between April frost and October frost. Chip stone has become the more common choice under pavers for exactly this reason, so reserve this sand for mortar, joints, and pool bases instead.

Mulch Mound Pro Tip

If your project needs both mortar sand and a base material like gravel or chip stone, ordering both in the same delivery window saves a second trip and a second cleanup on your driveway. Buying only what your square footage and depth actually call for keeps you from paying to move tonnage you will not use, especially since this sand runs 1.35 tons per yard and adds up fast on larger orders.

Working With Sand in Terre Haute

Terre Haute sits on silt loam, which drains slower and holds more moisture than sandy soils, so masons here lean on this sand to keep mortar consistent when the base soil underneath is heavy and wet in spring. With last frost around April 16 and first frost around October 16, the working season for mortar and paver work is roughly six months, and most crews push hard through that window before ground freeze sets in. It is also the standard fill for pool bases on new installs. Some builders here still ask for it as paver bedding, though chip stone has largely taken that job over because it does not pump moisture up through the joints.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand or concrete sand?

This is mason sand, sometimes called mortar sand, finer and more uniform than concrete sand. That finer grain is what makes mortar workable when you are pointing brick or block. If your project calls for concrete work instead, you want a coarser concrete sand, not this grade.

Answer

How many yards do I need for a small patio or mortar job?

One cubic yard covers about 324 square feet at a 1 inch depth. For mortar mixing, most small jobs use well under a yard since mortar itself only needs a fraction of that volume. For paver joint filling, a single yard often covers a much larger surface since the fill layer is so thin.

Answer

When is the best time to schedule this for a hardscape project?

Spring through fall is the working season here, roughly April through mid October before first frost sets in. Working in this window keeps mortar curing conditions stable and gives paver joint sand time to settle before winter freeze thaw cycles start moving things around.

Answer

Where should the sand be dropped on delivery day?

A driveway, curb, or any flat open spot near your work area works well. Since a cubic yard of this sand weighs around 1.35 tons, place it as close to the project as truck access allows, because moving it far by wheelbarrow afterward takes real time and effort.

Answer

Should I use this sand or chip stone under my pavers?

Many installers in this area have moved to chip stone for paver bedding because it locks in place and does not pump moisture through the joints over freeze thaw cycles. This sand still works well for mortar mixing, joint filling, and pool bases, it is really the paver bedding role where chip stone has become the more common pick.

More delivery around Terre Haute, Indiana

All Terre Haute, Indiana landscape supply