About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Highest compliments. Great driver.
Website is easy to navigate. Just a seamless process. 5 stars!!

This sand covers about 324 square feet at a 1 inch depth per cubic yard, and most bedding or mortar mixing jobs call for a 1 to 2 inch layer. For a typical paver patio or pool base project, figure your square footage and divide by 324 for a 1 inch layer, then double the yardage if you are going closer to 2 inches. It is sold by the cubic yard, so round up rather than guessing short mid project.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

A ton is 2,000 pounds of material. As a general guideline, one ton of rock covers roughly 100 square feet at 2 inches deep, depending on rock size and density.

Thornton Sand Delivery

Thornton Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Highest compliments. Great driver.
Website is easy to navigate. Just a seamless process. 5 stars!!

This sand covers about 324 square feet at a 1 inch depth per cubic yard, and most bedding or mortar mixing jobs call for a 1 to 2 inch layer. For a typical paver patio or pool base project, figure your square footage and divide by 324 for a 1 inch layer, then double the yardage if you are going closer to 2 inches. It is sold by the cubic yard, so round up rather than guessing short mid project.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

A ton is 2,000 pounds of material. As a general guideline, one ton of rock covers roughly 100 square feet at 2 inches deep, depending on rock size and density.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Thornton Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Sand pairs naturally with paver base gravel underneath it and with polymeric sand or chip stone joint fill on top, depending on what your installer prefers for this climate. If you are pouring a pool base or mixing mortar, having a landscape fabric on hand to separate the sand from the clay subgrade below helps keep the layer clean over time.

Map of the sand delivery area around Thornton, Colorado

Service area

Areas we deliver sand in Thornton, Colorado

Mulch Mound Pro Tip

If you are mixing mortar for stonework near Thornton's clay soils, keep your sand dry and covered until use, since damp sand throws off your mix ratio and makes the mortar harder to work in cooler shoulder season temperatures. A tarp over the pile overnight, especially once nights start dropping toward freezing in early October, keeps your mix consistent from batch to batch.

Mulch Mound Pro Tip

A common mistake on paver jobs here is skipping a compaction check under the sand bedding layer. Thornton's clay subgrade can settle unevenly once it takes on moisture, so tamp your base gravel firmly before screeding sand on top. Skipping this step is why pavers sink in one corner a year or two after installation, especially after a wet spring.

Mulch Mound Pro Tip

For pool bases and mortar work, mason sand is worth ordering separately from any coarser sand you might use for drainage, since the fine uniform grain is what makes mortar workable and pool liners lie flat. Buying just enough for the finish layer, and sourcing a cheaper base material for bulk fill underneath, keeps the job efficient without wasting the good stuff.

Working With Sand in Thornton

Thornton sits on alkaline clay that drains slowly and shifts with the freeze thaw cycle each winter, which is exactly the kind of subsoil that makes a stable sand base valuable under patios and walkways. With first frost landing around October 5 and last frost around May 5, most hardscape and mortar work happens in a tight window from late spring through fall. People building near the Carpenter Rec Center and similar public spaces around town lean on sand for mortar mixing and pool bases where a clay heavy yard would otherwise cause problems.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is the difference between this sand and regular construction sand?

This is washed and finely screened sand, uniform in grain size, which is what makes it workable for mortar mixing and smooth for pool bases. Regular construction or fill sand is coarser and less consistent, fine for bulk fill but not ideal where you need a smooth, even surface or a reliable mortar mix.

Answer

How much sand do I need for a paver patio in Thornton?

One cubic yard covers about 324 square feet at a 1 inch depth. Most paver bedding runs 1 to 2 inches deep, so a 300 square foot patio at 1.5 inches needs roughly 1.5 cubic yards. Round up slightly since clay subgrades here often need a touch more to level properly.

Answer

When is the best time to schedule a sand delivery for hardscape work?

Most hardscaping in Thornton happens between last frost around May 5 and first frost around October 5, so spring through fall is when crews are busiest and material moves fastest. Ordering a few days ahead of your project start keeps the sand from sitting exposed to rain or an early cold snap.

Answer

Where will the sand be placed on delivery day?

We place the load wherever you direct, typically a driveway or a spot close to your work area, since sand is heavy and you want it near where it will be used. Make sure there is a clear path for the truck and enough room for the pile before delivery day.

Answer

Should I use sand or chip stone for paver joints?

Sand has traditionally filled paver joints, but chip stone is increasingly used instead because it does not pump up between pavers over time the way sand can. If you want the classic look and are mixing mortar or setting a pool base, sand is still the right call, but for joint fill specifically, ask about chip stone.

More delivery around Thornton, Colorado

All Thornton, Colorado landscape supply