• Titusville FL Sand Delivery - Mulch Mound
  • Titusville FL Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Hannah
Hannah
Google Review

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

One cubic yard covers about 324 square feet at a 1 inch depth, so a typical paver patio or pool base run at 1 to 2 inches deep will need roughly a quarter to a half yard per 100 square feet. Mortar mixing jobs use far less by area since it is measured by batch rather than spread, so plan by bag ratio instead of square footage for that use. Order by the cubic yard and round up slightly, sand compacts more than it looks like it will.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Titusville Sand Delivery

Titusville Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Hannah
Hannah
Google Review

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

One cubic yard covers about 324 square feet at a 1 inch depth, so a typical paver patio or pool base run at 1 to 2 inches deep will need roughly a quarter to a half yard per 100 square feet. Mortar mixing jobs use far less by area since it is measured by batch rather than spread, so plan by bag ratio instead of square footage for that use. Order by the cubic yard and round up slightly, sand compacts more than it looks like it will.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Titusville Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Hannah
Hannah

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

Google Review
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review

Complete Your Outdoor Project

Most paver jobs pair mason sand with paver base stone underneath for structure, and polymeric jointing sand on top once the pavers are set. For pool bases, a layer of crushed stone below the sand helps with leveling before the sand goes down as the final cushion. If your project is mortar work, keep type S mortar cement on hand since the mix ratio depends on your block or brick type.

Titusville Soil Delivery
Titusville Mulch Delivery
Map of the sand delivery area around Titusville, Florida

Service area

Areas we deliver sand in Titusville, Florida

See All Locations
Mulch Mound Pro Tip

Mason sand looks similar to concrete sand but behaves very differently once wet. It holds a tighter, smoother finish, which is why masons in this area favor it for mortar joints on block homes built to handle salt air off the coast. If you are laying pavers, know that many crews in Florida have shifted to clean chip stone for bedding because it will not pump up through joints during our heavy summer downpours the way sand sometimes does.

Mulch Mound Pro Tip

A common mistake with mason sand is ordering it bone dry from a bagged source and expecting it to compact like a delivered yard load. Bulk sand holds a bit of natural moisture, which actually helps it settle and screed evenly for pool bases and paver beds. Do not let it sit uncovered through a full rainy season stretch, from June through September Titusville gets frequent downpours that can wash out an exposed pile or leave it saturated and hard to screed.

Mulch Mound Pro Tip

Because sand is sold and delivered as a bulk load, it is worth combining paver base stone and mason sand into one delivery trip if your project needs both, rather than scheduling two separate runs. Pairing materials on one truck cuts down on driveway wear and gets your job staged faster. If you are only mixing small mortar batches, a partial yard delivered still beats hauling dozens of bags from a big box store parking lot.

Working With Sand in Titusville

With Titusville sitting on sandy native soil already, this material is not about fixing drainage the way it might be inland, it is about hardscape precision. Pool decks and paver patios near the Space Coast humidity need a bedding layer that compacts evenly and holds joints tight against afternoon storms. Mason sand's fine, uniform grain is what masons here reach for when mixing mortar for block work or veneer near Kennedy Space Center area builds. It is also still specified for pool bases where a smooth, stable cushion under the liner matters more than drainage.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same thing as regular sand I'd buy in bags?

Not quite. Mason sand is washed and finely screened to be more uniform than typical bagged sand or concrete sand, which is what makes it workable for mortar and tight paver joints. Bagged play sand or all purpose sand is often coarser and less consistent, so it is not a direct substitute for mortar mixing or a pool base.

Answer

How many cubic yards do I need for a pool deck or patio base?

One cubic yard covers about 324 square feet at a 1 inch depth. For a 300 square foot patio at 1.5 inches, you would need roughly 1.4 cubic yards. Always round up slightly since compaction and uneven ground eat into your coverage more than the math suggests.

Answer

When is the best time to install a paver base or pool deck in Titusville?

Spring through fall is peak hardscape season here, and drier stretches make screeding and compacting sand much easier. Given our first frost isn't until mid December and last frost is mid March, there is a wide window to work, but try to avoid installing right before a heavy summer rain event since a fresh sand base can wash out before pavers are set.

Answer

Where will the sand be dropped on my property?

We place the load wherever you direct on your driveway or job site, as close to your work area as truck access allows. Delivery is scheduled at checkout once you confirm your address, and it helps to clear a wide, flat spot ahead of time so the driver can unload without backing into landscaping or narrow side yards.

Answer

Should I use mason sand or chip stone under my pavers?

Mason sand is still common for pool bases and mortar work, but for paver bedding many contractors have shifted to clean chip stone because it resists pumping up through joints during heavy rain. If your project is strictly pavers, ask your contractor which they spec, but for mortar mixing and pool bases mason sand remains the standard choice.

More delivery around Titusville, Florida

All Titusville, Florida landscape supply