About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Ordered Dirt. Received Dirt. Would Buy Again.

One cubic yard covers about 324 square feet at a 1 inch depth, so a typical patio joint fill or mortar batch job rarely needs more than a yard or two. For a pool base or a thicker 2 inch bed, plan on roughly half that coverage per yard. Measure your project area first, then work backward from there since sand is sold and delivered by the cubic yard.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Villanova Sand Delivery

Villanova Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Ordered Dirt. Received Dirt. Would Buy Again.

One cubic yard covers about 324 square feet at a 1 inch depth, so a typical patio joint fill or mortar batch job rarely needs more than a yard or two. For a pool base or a thicker 2 inch bed, plan on roughly half that coverage per yard. Measure your project area first, then work backward from there since sand is sold and delivered by the cubic yard.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Villanova Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most jobs that call for this sand also need a base material like crushed stone or paver base underneath it, and some Main Line patio builds are shifting to clean chip stone instead of sand for the bedding layer since it does not pump under freeze thaw cycles. If you are mixing mortar for a fieldstone wall or walkway, having bagged cement on hand alongside the bulk sand keeps the job moving without a second trip.

Mulch Mound Pro Tip

Villanova's silt loam holds water longer than sandy soils, so if you are setting pavers, do not skip a proper crushed stone base under this sand. Sand alone over silt loam will shift and settle unevenly once winter freeze and spring thaw cycles set in. Many masons in this area now use clean chip stone under the pavers instead, and reserve mason sand strictly for the joints and mortar work.

Mulch Mound Pro Tip

A common mistake is mixing mortar sand that is even slightly damp from sitting outside, since it throws off your water ratio and weakens the mix. Cover your delivered pile with a tarp between work sessions, especially with the Main Line's regular spring and fall rain. Dry, consistent sand gives you predictable mortar strength batch after batch.

Mulch Mound Pro Tip

If your project needs both mortar sand and a paver base, order them together to save on delivery trips, and consider chip stone for the base layer since it holds up better than sand under freeze thaw without pumping out from beneath the pavers. This pairing is becoming standard on newer hardscape jobs around Villanova.

Working With Sand in Villanova

Villanova sits on silt loam that holds moisture and compacts fine underfoot, so most sand work here is about controlled bedding rather than fighting drainage like sandier regions do. Homeowners near Villanova University tend to build brick and fieldstone walkways and patios that call for precise mortar mixing, and this sand is what masons reach for. With a zone 7a climate and a frost line that runs to late November, contractors like to get mortar and paver joint work done before the ground stiffens up in early winter.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is the difference between mason sand and regular sand for my patio project?

Mason sand is finer and more uniformly screened than concrete or paver sand, which makes it ideal for mortar mixing and paver joint fill but less common now as a bedding layer. Around Villanova, many patio builds now use chip stone for the base and reserve this sand for joints and mortar, since chip stone resists pumping under freeze thaw.

Answer

How much sand do I need for a paver patio's joints?

For joint fill at roughly 1 inch depth, one cubic yard covers about 324 square feet, though joint work uses much less volume than a full bedding layer since you are only filling gaps between pavers. Most patio jobs of a few hundred square feet need well under a full yard just for joints.

Answer

When is the best time to do mortar or paver work in Villanova?

Spring through fall is peak hardscape season here, with most masons wrapping up mortar and joint work before the ground firms up around the first frost in early November. Working in the shoulder seasons avoids the summer heat that can dry mortar too fast.

Answer

Where will the sand be dropped off and can the truck access a tight driveway?

The delivery truck will place the load wherever there is clear, accessible space, typically a driveway or curb area you designate. Let us know at checkout if your access is tight or if there are low branches or narrow gates, since that helps plan the drop spot ahead of delivery day.

Answer

Should I use mason sand or chip stone under my pavers?

For paver bedding, chip stone is increasingly preferred over sand because it locks together and does not pump or wash out under freeze thaw cycles the way sand can. Mason sand still works best for the joints on top and for mixing mortar, so many Villanova jobs end up using both materials for different parts of the same project.

More delivery around Villanova, Pennsylvania

All Villanova, Pennsylvania landscape supply