Really appreciate the care and follow thru that this company had with our order. A hiccup came up but they were quick to respond and address all concerns, which made our garden day a success! Thank you for your prompt care.
Thanks! We received your request.
Something went wrong. Please try again.
One cubic yard covers about 324 square feet at a 1 inch depth, and most mortar and bedding applications only need 1 to 2 inches, so a single yard often handles a patio, a walkway, or several pool base sections. For paver joint filling you will use far less per square foot than for a bedding layer, so measure your actual project area and depth before rounding up. At 1.35 tons per cubic yard, this is heavy material, so even a modest order adds up fast in weight.
Couldn't load pickup availability
We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.
If your sand isn't the quantity or quality you ordered, we'll make it right.
Really appreciate the care and follow thru that this company had with our order. A hiccup came up but they were quick to respond and address all concerns, which made our garden day a success! Thank you for your prompt care.
One cubic yard covers about 324 square feet at a 1 inch depth, and most mortar and bedding applications only need 1 to 2 inches, so a single yard often handles a patio, a walkway, or several pool base sections. For paver joint filling you will use far less per square foot than for a bedding layer, so measure your actual project area and depth before rounding up. At 1.35 tons per cubic yard, this is heavy material, so even a modest order adds up fast in weight.
Thanks! We received your request.
Something went wrong. Please try again.
Getting started is easy — just follow these simple steps
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
Select a delivery date you'd like for the product to be dropped off at your home
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
Really appreciate the care and follow thru that this company had with our order. A hiccup came up but they were quick to respond and address all co...
Really appreciate the care and follow thru that this company had with our order. A hiccup came up but they were quick to respond and address all concerns, which made our garden day a success! Thank you for your prompt care.
I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!
Highest compliments. Great driver.
Website is easy to navigate. Just a seamless process. 5 stars!!
Sand pairs naturally with paver base stone or crushed concrete for the compacted layer underneath, with the sand as the fine leveling course on top. If you are mixing mortar for a block or brick project, you will also want cement on hand before the sand arrives. Some Warren crews are moving to chip stone for paver bedding since it will not pump under freeze thaw cycles, worth asking about if that is your project.
For mortar work, keep this sand dry and covered before mixing, since Warren's humidity swings between spring and summer can change your water ratio batch to batch if the sand sits out uncovered. A tarp over the pile costs nothing and saves you from adjusting mix consistency mid job. This matters more with mason sand than with coarser material because the fine grains hold moisture longer.
A common mistake on paver jobs is using this sand as the bedding layer under freeze thaw conditions like Warren sees every winter. Fine sand can pump up through joints as the ground heaves, leading to uneven pavers by the second season. If you are bedding rather than mixing mortar or filling joints, ask about chip stone instead, since it locks in place and does not migrate.
If you are running both a mortar job and a paver project in the same season, order your bedding stone and this sand together to consolidate delivery trips. Since sand weighs 1.35 tons per yard, overordering gets expensive to move later, so size the mortar portion separately from the joint fill and bedding portions rather than guessing one combined number.
Warren sits on clay loam, which drains slowly and holds water, so any hardscape project here needs a clean, well drained bedding layer rather than relying on the native soil to move water away from pavers or a pool deck. This sand's fine, uniform grain is exactly what mortar mixes need to stay workable when you are pointing brick or block on an older Warren home. Because the ground freezes solid by late fall with a first frost around October 26, most masonry and paver work here happens in a tight window from spring thaw through fall, and having material staged ahead of a weekend job saves a trip mid project.
Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.
For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.
Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.
