• Washington IN Sand Delivery - Mulch Mound
  • Washington IN Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Hannah
Hannah
Google Review

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, or roughly half that at a full 2 inches, which is the typical install range for bedding and mortar work. Most paver patios and pool base jobs in Washington run a 1 to 1.5 inch layer, so measure your square footage first and work backward from there. If you are mixing mortar rather than bedding, order is driven by batches, not coverage, so estimate by weight instead using the 1.35 tons per yard figure.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Washington Sand Delivery

Washington Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Hannah
Hannah
Google Review

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, or roughly half that at a full 2 inches, which is the typical install range for bedding and mortar work. Most paver patios and pool base jobs in Washington run a 1 to 1.5 inch layer, so measure your square footage first and work backward from there. If you are mixing mortar rather than bedding, order is driven by batches, not coverage, so estimate by weight instead using the 1.35 tons per yard figure.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Washington Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Hannah
Hannah

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

Google Review
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review

Complete Your Outdoor Project

Most Washington customers pairing sand with a paver project also order crushed stone or road base for the compacted sub base beneath it, since sand alone will not carry the load without that layer. For mortar jobs, cement and masonry blocks usually come from a separate supplier, but the sand should arrive first so it is on hand and dry when the mixing starts. If your project is a pool base, a thin layer of this sand over compacted stone is the standard finish before the liner goes down.

Washington Soil Delivery
Washington Mulch Delivery
Map of the sand delivery area around Washington, Indiana

Service area

Areas we deliver sand in Washington, Indiana

See All Locations
Mulch Mound Pro Tip

Mason sand and concrete sand look similar in a pile but behave very differently once wet. Mason sand is finer and more uniform, which is exactly why it works in mortar, but that same fineness means it holds water longer in Washington's silt loam soil. If you are using it as paver bedding, screed it on a dry day and compact lightly before setting stone, otherwise trapped moisture can cause slight settling later.

Mulch Mound Pro Tip

A common mistake on pool base and paver jobs is skipping the compacted stone layer underneath and going straight to sand on native soil. In this area's silt loam, that shortcut almost guarantees uneven settling within a season or two as the soil shifts with freeze thaw cycles between the October and April frost dates. Always build up from a compacted base layer, then finish with sand, never sand directly on grade.

Mulch Mound Pro Tip

Many contractors in this area are shifting away from sand for paver joints and bedding toward clean chip stone, since it locks better and will not pump out under freeze thaw pressure the way sand can. If your project is strictly mortar mixing or a pool base, sand is still the right call and ordering the full amount up front in one delivery avoids the extra trip charges of buying bagged material twice.

Working With Sand in Washington

Washington sits on silt loam soil that holds water and turns soft in spring thaw, which is exactly why sand matters here for drainage layers under patios and walkways. With a last frost around April 18 and first frost near October 20, the building season is real but not endless, so contractors and homeowners tend to order material once and get moving. Mason sand does not compact into the silt loam the way native soil does, which is the point when you are setting a paver base or leveling a pool pad. It is also the standard choice for mixing mortar on courthouse-era brick and block repairs still common around town.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, this is washed and finely screened natural sand, which is what people in many regions call mason sand. It is finer and more uniform than concrete sand, which is why it works well in mortar mixes and as a smooth base under pavers or pool liners in Washington's silt loam soil.

Answer

How many cubic yards do I need for a paver patio?

One cubic yard covers about 324 square feet at a 1 inch depth. Most patios use a 1 to 1.5 inch bedding layer, so a 300 square foot patio at 1.5 inches would need roughly 1.4 cubic yards. Measure your area first, then order slightly more than the exact number to cover uneven spots.

Answer

When is the best time to install a sand base in Washington?

Spring through fall is best, once the ground has thawed after the last frost around April 18 and before the ground firms up again near the October 20 first frost. Working in this window means the silt loam beneath your base is stable enough to compact properly, rather than soft from spring melt or frozen going into winter.

Answer

Where will the sand be dropped off?

The delivery truck places the load wherever you specify at checkout, typically a driveway or staging area near your project. Make sure the spot is at least ten feet wide and clear of overhead obstructions, and let us know if the truck needs to avoid crossing lawn or landscaping.

Answer

Should I use sand or chip stone for paver joints?

For paver joints specifically, many contractors now prefer clean chip stone since it locks in place and does not pump out under freeze thaw stress the way sand can. Sand is still the right choice for mortar mixing and pool base work, where its fine uniform texture is exactly what the job requires.

More delivery around Washington, Indiana

All Washington, Indiana landscape supply