About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

The website to order is super easy to use. Pick a mulch, date/time/driveway location of the delivery and that’s it. A few days later there was a nice mound of mulch in my driveway. Great service - just as promised.

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, and typical installs run 1 to 2 inches depending on whether you are bedding pavers or mixing mortar. For a standard patio or paver joint job, most homeowners in Waterloo order somewhere between half a yard and two yards. Measure the actual square footage of your project and work backward from that 324 square foot figure at 1 inch.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Waterloo Sand Delivery

Waterloo Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

The website to order is super easy to use. Pick a mulch, date/time/driveway location of the delivery and that’s it. A few days later there was a nice mound of mulch in my driveway. Great service - just as promised.

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, and typical installs run 1 to 2 inches depending on whether you are bedding pavers or mixing mortar. For a standard patio or paver joint job, most homeowners in Waterloo order somewhere between half a yard and two yards. Measure the actual square footage of your project and work backward from that 324 square foot figure at 1 inch.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Waterloo Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most masonry jobs pair this sand with Portland cement for mortar, or with edge restraints and paver base if you are setting a patio or walkway. If you are doing pool base work, a layer of crushed limestone underneath first gives you a firmer, more stable foundation before the sand goes down.

Map of the sand delivery area around Waterloo, Iowa

Service area

Areas we deliver sand in Waterloo, Iowa

Mulch Mound Pro Tip

Because Waterloo's silt loam holds water longer than sandier soils, do not spread this sand over ground that is still wet from rain, it will trap moisture underneath your pavers or mortar bed and cause settling later. Wait for a dry stretch of 24 to 48 hours before base work. This is the single biggest reason paver jobs shift within their first year in this region.

Mulch Mound Pro Tip

A common mistake is using this fine washed sand as paver bedding instead of joint fill, since finer sand can migrate and pump up through joints under freeze thaw cycles. Many contractors here have switched to clean chip stone for the bedding layer and reserve this sand strictly for sweeping into joints, where its fine grain actually helps it lock in place.

Mulch Mound Pro Tip

If your project includes both mortar work and paver joints, order this sand as one delivery rather than two separate purchases, since it works for both applications and you avoid a second delivery fee. Keep leftover sand covered and dry through winter so it is ready to use again once frost clears in late April.

Working With Sand in Waterloo

Waterloo sits on silt loam, which drains slower than sandy soil and holds moisture near the surface after spring rain. That matters for hardscape work because a wet base compacts poorly and shifts once it freezes. With frost reaching down hard by early October and staying until late April, any sand base under pavers or a patio needs to be set and compacted before that first freeze locks the ground. Most masonry and paver jobs here run spring through fall, which is when this sand moves fastest.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, this washed and finely screened sand is what people in many regions call mason sand. It is finer and more uniform than concrete sand, which is what makes it workable for mortar mixing and tight paver joints rather than structural base work.

Answer

How much sand do I need for a small paver patio?

One cubic yard covers about 324 square feet at 1 inch deep, but joint fill only needs a thin layer, not a full inch across the whole patio. For a typical 200 square foot patio's joints, a quarter to half a yard is usually plenty, depending on your paver spacing.

Answer

When is the best time to install this in Waterloo?

Spring through fall works best, ideally after the ground has dried out from spring thaw and before the first hard frost in early October. Avoid working the sand into wet silt loam soil, since trapped moisture underneath a patio or wall base can cause settling once winter freeze and thaw cycles begin.

Answer

Where will the delivery truck place the sand?

The truck places the load at the driveway or curb spot you specify when you schedule delivery. Make sure the path is clear and wide enough for a dump truck, and if the ground has been wet, put down plywood or a tarp so the load does not sink into soft silt loam soil.

Answer

Should I use this sand or chip stone for paver bedding?

For paver joints and mortar, this fine sand is the right choice. For the actual bedding layer under pavers, many contractors now prefer clean chip stone, since it does not pump or shift the way finer sand can under freeze thaw pressure common in a zone 5a climate like Waterloo's.

More delivery around Waterloo, Iowa

All Waterloo, Iowa landscape supply