About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, less if you go deeper. Most structural fill jobs run 6 to 12 inches, so a 200 square foot low spot at 8 inches lands around 5 cubic yards. Measure the actual low area, not the whole yard, since fill dirt is for correcting grade, not blanketing a whole lot.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Fort Smith Fill Dirt Delivery

Fort Smith Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, less if you go deeper. Most structural fill jobs run 6 to 12 inches, so a 200 square foot low spot at 8 inches lands around 5 cubic yards. Measure the actual low area, not the whole yard, since fill dirt is for correcting grade, not blanketing a whole lot.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Fort Smith Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill dirt jobs finish with a few yards of topsoil on top, since fill dirt alone will not grow grass or hold plants. If the area sits near a foundation or pool wall, some contractors also order crushed stone underneath for drainage before the fill goes in. Ask about topsoil delivery in the same order if you know the finish grade needs to support lawn.

Mulch Mound Pro Tip

Fill dirt is structural, not topsoil, so never dump it all in one deep pour. Place it in 6 to 8 inch lifts and compact each one with a plate compactor or hand tamper before adding the next. Skipping this step is the number one reason people see sinking or cracking a year later, especially in clay loam soils like Fort Smith's that hold moisture and shift as they dry out.

Mulch Mound Pro Tip

A common mistake is capping fill dirt with grass seed directly. Fill dirt has no organic matter and compacts too hard for roots to establish. Always finish with 3 to 4 inches of real topsoil before seeding or sodding, and let the fill settle through a rain cycle first if your timeline allows it, since Fort Smith's clay base means settling can take a few weeks to show.

Mulch Mound Pro Tip

If your project also needs drainage work near a foundation or pool, order crushed stone for the base layer before the fill dirt goes on top. Doing both in one delivery visit saves a second trip charge and lets you sequence the job properly, stone first for drainage, then fill dirt to bring the grade up, then topsoil to finish.

Grading and Filling in Fort Smith

Fort Smith sits on clay loam that already drains slow, so low areas around foundations, sheds, and pool decks tend to hold water after storms. Fill dirt gives you a stable base to build those areas up before the soil settles for a season or two. Because this is subsoil, not topsoil, it will not support plant growth on its own, which matters here since most yards need a finish layer to get grass established again. Plan for a cap of topsoil on anything that needs to grow back.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Can I use fill dirt to level my whole backyard in Fort Smith?

You can, but fill dirt is meant for raising low spots and building structural grade, not as a finish layer. If the whole yard needs leveling, plan on capping the fill dirt with topsoil once it is compacted, otherwise grass will not establish and the surface will stay hard and uneven.

Answer

How many cubic yards of fill dirt do I need for a low spot by my foundation?

One cubic yard covers about 54 square feet at 6 inches deep. Measure the low area's square footage, decide your depth between 6 and 12 inches, and scale from there. A 100 square foot spot at 8 inches needs roughly 2.5 cubic yards.

Answer

When is the best time to bring in fill dirt in Fort Smith?

Fill dirt is project driven, not seasonal, so timing is about your job, not the calendar. That said, working when the ground is not saturated makes compaction easier, so avoid heavy spring rain stretches if you can schedule around them.

Answer

Where will the delivery truck place the fill dirt on my property?

The driver places the load exactly where you point on delivery day, as close to your work area as the truck can safely access. Clear the path ahead of time and make sure the spot can handle a loaded truck's weight, especially on clay loam ground that can be soft after rain.

Answer

Should I get fill dirt or topsoil for my project?

Use fill dirt to raise grade or backfill structurally, then cap with topsoil wherever you need grass, plants, or garden beds. Fill dirt alone will not support growth, it is meant to build the base underneath the layer that actually grows things.

More delivery around Fort Smith, Arkansas

All Fort Smith, Arkansas landscape supply