• Fort Smith AR Sand Delivery - Mulch Mound
  • Fort Smith AR Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

At one inch deep, a cubic yard of this sand covers about 324 square feet, so a small patio or paver joint job might only need a fraction of a yard, while a full pool base or larger patio at 2 inches will roughly double your material needs per square foot. Measure the actual work area, not the whole yard, since this sand is used in thin layers not as fill.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Fort Smith Sand Delivery

Fort Smith Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

At one inch deep, a cubic yard of this sand covers about 324 square feet, so a small patio or paver joint job might only need a fraction of a yard, while a full pool base or larger patio at 2 inches will roughly double your material needs per square foot. Measure the actual work area, not the whole yard, since this sand is used in thin layers not as fill.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Fort Smith Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review

Complete Your Outdoor Project

Mason sand pairs naturally with pavers, block, and stone for any project where you're also ordering gravel or crushed stone for a compacted base layer underneath. If you're mixing mortar on site, you'll likely also want cement delivered alongside it. For pool installs, some contractors are shifting toward chip stone instead of sand for the base layer since it does not pump or shift the way sand can under water pressure.

Fort Smith Soil Delivery
Fort Smith Mulch Delivery
Map of the sand delivery area around Fort Smith, Arkansas

Service area

Areas we deliver sand in Fort Smith, Arkansas

See All Locations
Mulch Mound Pro Tip

Mason sand and concrete sand look similar but behave differently. Mason sand is finer and more uniform, which is exactly why it works for mortar, it blends smoother and holds moisture more evenly so your mix stays workable longer. If you use concrete sand for mortar by mistake, expect a grittier mix that's harder to trowel cleanly, especially on brick joints where finish matters.

Mulch Mound Pro Tip

A common mistake on clay loam sites like much of Fort Smith is skipping a compacted base layer before spreading sand for pavers. Sand alone over clay loam will shift and settle unevenly once the ground gets wet, since the clay underneath doesn't drain fast. Compact a gravel base first, then add your sand layer on top, thin and level, rather than relying on sand to do the leveling work by itself.

Mulch Mound Pro Tip

If you're doing a paver patio, ask yourself whether you actually need sand or whether chip stone makes more sense for your base. Sand has been the traditional choice for paver bedding for decades, but chip stone doesn't pump up through joints over time the way sand can, especially with heavy rain and the clay loam soil common around here holding water at the surface longer than sandier soils would.

Working With Sand in Fort Smith

Fort Smith sits on clay loam, which drains slowly and gets sticky when wet, so a lot of masons here use sand as a leveling and bedding layer to break up that heavy base before pavers or block go down. With hardscape season running spring through fall and a frost line that shows up mid November, most mortar and paver work happens in a tight window before winter, so timing your sand delivery to your actual work schedule matters more than it does in milder climates. Pool installs are common in the newer subdivisions, and mason sand is still the standard base layer for those. This is not fill sand, it is fine and consistent, which is exactly what makes it useful for joints and mortar rather than grading.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, this is washed and finely screened mason sand, which is the term used most often in this region. It's finer and more uniform than concrete sand, which is what makes it workable for mortar mixing and clean enough for paver joints and pool bases.

Answer

How much sand do I need for a paver patio?

At a typical 1 inch bedding depth, one cubic yard covers about 324 square feet, so a 300 square foot patio needs roughly a full cubic yard. If you're going closer to 2 inches deep, plan for close to double that amount for the same square footage.

Answer

When is the best time to install with sand in Fort Smith?

Spring through fall is when most hardscape work happens here, before the first frost typically hits mid November. Mortar work especially needs above freezing temperatures to cure properly, so plan paver and masonry projects with enough buffer before late fall.

Answer

Where will the sand be dropped off?

The delivery truck places the load wherever you specify, usually a driveway or a spot close to the work area. Make sure there's clear access for the truck and enough room for the pile, since sand can spread out more than expected once it's dumped.

Answer

Should I use sand or chip stone under my pavers?

Sand has long been the standard bedding material and still works well, but many contractors are shifting to chip stone since it doesn't pump up through joints over time the way sand can, especially in wetter clay soils. If you want the traditional approach or need sand for mortar mixing too, mason sand remains the practical choice.

More delivery around Fort Smith, Arkansas

All Fort Smith, Arkansas landscape supply