Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!
Thanks! We received your request.
Something went wrong. Please try again.
One cubic yard covers about 324 square feet at a 1 inch depth, and most mortar mixing or bedding work only calls for that 1 to 2 inch range. For a paver patio or pool base, measure the square footage first, then figure your depth based on what the project actually needs, mortar jobs use far less volume than a bedding layer. At 1.35 tons per cubic yard, a couple of yards adds real weight, so think about where the delivery truck can actually access your site.
Couldn't load pickup availability
We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.
If your sand isn't the quantity or quality you ordered, we'll make it right.
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!
One cubic yard covers about 324 square feet at a 1 inch depth, and most mortar mixing or bedding work only calls for that 1 to 2 inch range. For a paver patio or pool base, measure the square footage first, then figure your depth based on what the project actually needs, mortar jobs use far less volume than a bedding layer. At 1.35 tons per cubic yard, a couple of yards adds real weight, so think about where the delivery truck can actually access your site.
Thanks! We received your request.
Something went wrong. Please try again.
Getting started is easy — just follow these simple steps
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
Select a delivery date you'd like for the product to be dropped off at your home
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will de...
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!
Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of cautio...
Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!
Great service. We ordered topsoil from Mulch Mound and the best experience. Thank you so much!
Sand pairs naturally with paver base stone or clean chip stone for patios and walkways, and with bagged or bulk cement for anyone mixing mortar on site. If you're setting a pool, a compactable base material under the sand layer helps it hold its grade through Virginia's wet springs.
Service area
For mortar mixing, screen out any clumps before you start, mason sand should already be uniform but exposure to humidity during a Fredericksburg summer can cause light clumping in storage. A dry, workable mix depends on consistent sand, so if it's been sitting under a tarp for a week, break it up before you start batching. This matters more for repointing old brick where joint consistency shows.
A common mistake with paver bedding is using mason sand where clean chip stone would hold up better, mason sand can migrate and settle unevenly under freeze thaw cycles like the ones Fredericksburg sees from late October through March. If you're setting pavers rather than mixing mortar, ask about chip stone instead, it doesn't pump the way sand can after a hard freeze.
If you're doing both a mortar job and a bedding layer, it's worth ordering mason sand for the mortar and pairing it with a separate coarser material for bedding rather than trying to make one sand type do both jobs. Keeping the two separate on site also makes it easier to track how much of each you're actually using as the project moves along.
Fredericksburg's clay loam soil is dense and holds water, which is exactly why sand gets used here for drainage layers under patios and pool decks rather than mixed into garden beds. With the region's freeze thaw cycles between late October and late March, a solid sand base under pavers or a mortar joint that was mixed right matters more than it would somewhere with a milder winter. Masons working near the historic district on older brick tend to want a finer, more consistent sand for repointing work, which is what this is. Contractors here are increasingly swapping chip stone in for paver bedding, but mason sand still does the mortar and pool base jobs it always has.
Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.
For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.
Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.
