About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!

Fill dirt is sold by the cubic yard, and one yard covers about 54 square feet at a 6 inch depth, or roughly 27 square feet if you are going a full 12 inches. Most structural fill jobs, like raising a low corner of a yard or backfilling around a foundation wall, land somewhere in that 6 to 12 inch range depending on how much grade change you need. Measure your low area in square feet first, then decide your target depth before ordering.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Jamestown Fill Dirt Delivery

Jamestown Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!

Fill dirt is sold by the cubic yard, and one yard covers about 54 square feet at a 6 inch depth, or roughly 27 square feet if you are going a full 12 inches. Most structural fill jobs, like raising a low corner of a yard or backfilling around a foundation wall, land somewhere in that 6 to 12 inch range depending on how much grade change you need. Measure your low area in square feet first, then decide your target depth before ordering.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Jamestown Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill dirt jobs finish with a topsoil cap, since fill is a structural base and not something anything will grow in on its own. If the finished area is going to be lawn or garden, plan on 4 to 6 inches of topsoil over the compacted fill. Some jobs also pair fill with gravel for a drainage layer underneath decks or sheds built on the softer silt loam common around here.

Map of the fill dirt delivery area around Jamestown, New York

Service area

Areas we deliver fill dirt in Jamestown, New York

Mulch Mound Pro Tip

Do not dump fill in one deep pile and call it done. Spread it in lifts of 6 to 8 inches and compact each one with a plate compactor or by hand tamping before adding the next layer. Skipping this step is the single biggest reason people call us back a year later asking why their yard has a sunken spot, especially on silt loam ground that already holds moisture and settles unevenly under uncompacted fill.

Mulch Mound Pro Tip

With first frost arriving by mid October in Jamestown, try to get fill placed and compacted before the ground starts freezing at night, since compacting frozen or half frozen soil does not pack the same way and leaves voids that show up as settling in spring thaw. Late summer through early fall is a practical window for foundation and grading work here before the weather turns.

Mulch Mound Pro Tip

If your project needs both structural height and something to grow on top, order fill and topsoil as separate deliveries rather than trying to blend them yourself. Fill compacts best when it is just subsoil, and mixing in topsoil weakens the structural layer while wasting good growing soil underneath where roots will never reach it.

Grading and Filling in Jamestown

Jamestown sits on silt loam that already holds water well, which means low spots and drainage swales around the city tend to stay soft into late spring. Fill dirt gives you a structural base to raise that ground above the water table before anything else gets built or planted on it. With frost reaching into mid October and lingering into May, projects here often get squeezed into a shorter window, so getting fill delivered and compacted early matters. It is common in this area to see fill used around foundations on the older housing stock near downtown, where grading has settled unevenly over decades.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Is fill dirt the same as topsoil?

No. Fill dirt is subsoil, screened of debris but with little organic matter, and it is meant to be a structural base, not a growing medium. Topsoil goes on top once your fill is compacted, usually in a 4 to 6 inch cap, if the area needs to support grass, garden beds, or landscaping.

Answer

How many cubic yards of fill do I need to raise a low spot in my yard?

One cubic yard covers about 54 square feet at 6 inches deep. Measure the square footage of your low area, decide how many inches you need to raise it, and scale from there. A 300 square foot area raised 6 inches needs about 5.5 cubic yards before accounting for compaction settling.

Answer

Do I need to compact fill dirt myself or can I just let it settle?

You should compact it yourself in layers as you go. Placing fill in 6 to 8 inch lifts and tamping each one before adding more prevents years of gradual settling, which is especially common in this area's silt loam ground once it takes on moisture. Uncompacted fill can keep sinking for a couple of years.

Answer

Can the truck get fill dirt into a backyard or does it have to stay in the driveway?

Delivery trucks place material at an accessible drop point, typically a driveway or the closest spot a truck can safely reach. If your project area is farther back on the property, plan on moving material by wheelbarrow from the drop zone, and let us know about any tight gates or narrow access when you schedule.

Answer

Should I use fill dirt or gravel to build up a low area before a shed or patio?

It depends on drainage needs. Fill dirt works well for general grade raising and backfill, but if the area needs to shed water well, like under a shed base, a gravel layer either alone or under fill often performs better given how slowly Jamestown's silt loam drains after rain.

More delivery around Jamestown, New York

All Jamestown, New York landscape supply