I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).
About this sand
Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).
Tell us what you're looking for
Thanks! We received your request.
Something went wrong. Please try again.
How Much Sand Do I Need?
How Much Sand Do I Need?
One cubic yard of sand covers about 324 square feet at a 1 inch depth, and most mortar or paver joint work only calls for a 1 to 2 inch layer, so a single yard often handles a good sized patio or walkway job. At 1.35 tons per cubic yard, this is heavy material, so measure your area first and multiply the square footage by your planned depth before ordering. Larger pool base or bedding jobs will run closer to full yard increments.
What is a Yard?
What is a Yard?
FAQs
FAQs
Jamestown Sand Delivery
Jamestown Sand Delivery
Regular price
$74.00
per
Yard
Regular price
Sale price
$74.00
Unit price
per
Shipping calculated at checkout.
Minimum of 3 Yard
Couldn't load pickup availability
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound
The best local sand, without the guesswork.
We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.
Mulch Mound Guarantee
If your sand isn't the quantity or quality you ordered, we'll make it right.
About this sand
Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).
How Much Sand Do I Need?
How Much Sand Do I Need?
One cubic yard of sand covers about 324 square feet at a 1 inch depth, and most mortar or paver joint work only calls for a 1 to 2 inch layer, so a single yard often handles a good sized patio or walkway job. At 1.35 tons per cubic yard, this is heavy material, so measure your area first and multiply the square footage by your planned depth before ordering. Larger pool base or bedding jobs will run closer to full yard increments.
What is a Yard?
What is a Yard?
FAQs
FAQs
Tell us what you're looking for
Thanks! We received your request.
Something went wrong. Please try again.
How It Works
Getting started is easy — just follow these simple steps
1
Choose your quantity
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
2
Select your delivery date
Select a delivery date you'd like for the product to be dropped off at your home
3
Sit back and wait
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!
Complete Your Outdoor Project
Sand pairs naturally with paver base stone, edge restraints, and polymeric jointing sand for a complete patio or walkway build. For mortar work, most masons order sand alongside their block or brick delivery so both land on site together. If you are leaning toward a paver bedding layer, ask about chip stone as an alternative before you commit to sand.
Service area
Areas we deliver sand in Jamestown, New York
Mulch Mound Pro Tip
Mason sand and paver bedding sand look similar but behave differently once wet. For mortar mixing, you want the finer, more uniform grain because it makes the mix workable under a trowel, but that same fineness means it can pump up through paver joints during Jamestown's freeze thaw cycles. If your project is a paver patio rather than a mortar job, ask about chip stone bedding instead, it locks in place and will not migrate the way sand can over a winter.
Mulch Mound Pro Tip
Do not stockpile sand outdoors uncovered through a Jamestown winter if you are not using it right away. Repeated freeze and thaw cycles combined with our snow load will crust and clump the pile, and moisture trapped inside can freeze solid, making it hard to shovel or screed until it thaws out again. Order closer to when you will actually use it, especially for late fall projects that might sit into spring.
Mulch Mound Pro Tip
If you are doing both mortar work and paver joint fill on the same job, order them as separate calculated amounts rather than one combined guess, since joint fill needs are usually much smaller than what a mason uses mixing mortar by the batch. Combining orders into one delivery still saves a trip charge, but keeping the volumes separate in your head prevents running short on the mortar side mid pour.
Working With Sand in Jamestown
Jamestown sits on silt loam soil and gets a real winter, so most sand work here is tied to hardscape jobs rather than soil amendment, patios near Chautauqua Lake, walkways, mortar for stone or block work. The fine, uniform grain is what makes mortar workable when masons are laying block through a short building season bookended by an October first frost and a May last frost. Because the ground freezes hard here, any sand base under pavers needs to be compacted well before that first freeze locks things in place. A lot of local installers are shifting paver bedding over to chip stone since it does not pump the way sand can under freeze thaw cycles.
Masonry vs Fill Sand
Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.
Bedding and Leveling
For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.
Working With Moisture
Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.