About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Easy to order, great service, and great product. We enjoy the final look of a very neglected beds we inherited!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, so a small foundation backfill might only need a few yards while raising a low section of yard across a wider area adds up fast. Measure the length and width of the area you're filling and decide on a depth between 6 and 12 inches depending on how much you're correcting, then order by the cubic yard from there. It's easier to add a bit more than to run short mid project and wait on a second load.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Morgantown Fill Dirt Delivery

Morgantown Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Easy to order, great service, and great product. We enjoy the final look of a very neglected beds we inherited!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, so a small foundation backfill might only need a few yards while raising a low section of yard across a wider area adds up fast. Measure the length and width of the area you're filling and decide on a depth between 6 and 12 inches depending on how much you're correcting, then order by the cubic yard from there. It's easier to add a bit more than to run short mid project and wait on a second load.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Morgantown Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill jobs finish with a cap of topsoil once the fill is compacted, since nothing grows well directly in subsoil. If the area will see grass or planting beds, order topsoil for the top few inches, and if drainage is a concern on a sloped lot, gravel underneath or along the edge of the fill helps move water away instead of letting it sit against the new grade.

Mulch Mound Pro Tip

Compact fill dirt in lifts no thicker than 6 to 8 inches. Dumping a full yard in one pile and walking away leaves air pockets that settle unevenly for years, which shows up later as a dip near a foundation or patio. On Morgantown's silt loam base, a plate compactor or hand tamper between each lift makes a real difference, especially near structures where you can't afford the ground to move.

Mulch Mound Pro Tip

The most common mistake we see is people trying to plant directly into fill dirt. It's subsoil, not a growing medium, and it lacks the organic content roots need. Always cap finished fill with 4 to 6 inches of topsoil before seeding or landscaping. Skipping this step usually means patchy grass and a return trip for more material once the problem shows up.

Mulch Mound Pro Tip

If you're filling a large low area, it's often more efficient to order fill dirt for the bulk of the depth and finish with a thinner topsoil layer, rather than filling the whole depth with topsoil, which costs more and isn't needed structurally. This pairing gets you a stable base and a plantable surface without over ordering the more expensive material.

Grading and Filling in Morgantown

Morgantown sits at 960 feet with a lot of sloped and terraced lots, and the silt loam underneath compacts differently than sand or clay, so it tends to hold shape once it's tamped but can shift if it's dumped loose and left. Homes near the river valleys and hillsides often need fill to correct grading before water finds its way toward a foundation. With a hard freeze arriving around October 10 and frost lingering into May, most fill projects here get scheduled outside that window so compaction isn't fighting frozen or saturated ground. This is structural material, not something you plant into, so it's about building a stable base before the visible landscaping starts.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Can I use fill dirt to level a sloped backyard in Morgantown?

Yes, fill dirt is a common choice for correcting slope and low spots, especially on the hillside lots common around Morgantown. Place it in 6 to 8 inch lifts and compact each layer as you go, since uncompacted fill on a slope is more likely to shift or wash out during heavy rain. Cap with topsoil if the area will be seeded.

Answer

How many cubic yards do I need to fill a 10 by 10 foot area?

At a 6 inch depth, one cubic yard covers about 54 square feet, so a 100 square foot area needs roughly 2 cubic yards. If you're filling deeper, up to 12 inches, plan on close to double that amount. It's a good idea to round up slightly since compaction reduces volume once it's tamped down.

Answer

When is the best time to bring in fill dirt before winter hits?

Aim to finish fill and compaction work before the ground freezes, which typically starts around October 10 in Morgantown. Working fill dirt into frozen or waterlogged ground makes proper compaction difficult and increases the chance of settling once things thaw in spring. Late summer through early fall is usually the most workable stretch.

Answer

Can the delivery truck get up my driveway if it's on a hill?

Most residential driveways and street access work fine, but Morgantown has plenty of steep or narrow drives where a full size truck may not be able to safely maneuver. Let us know about any tight turns, low clearance, or steep grades when you schedule, and we can talk through the best drop spot before delivery day.

Answer

Should I order fill dirt or topsoil for my project?

Fill dirt is the right choice for raising grade, backfilling, or building a base, since it's a structural subsoil meant to be compacted. Topsoil is what you cap it with when something needs to grow, like grass or garden beds. Most grading projects use both, fill dirt for the bulk of the depth and topsoil on top.

More delivery around Morgantown, West Virginia

All Morgantown, West Virginia landscape supply