• Saratoga Springs NY Sand Delivery - Mulch Mound
  • Saratoga Springs NY Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Donna Nedrow
Donna Nedrow
Google Review

Great service. We ordered topsoil from Mulch Mound and the best experience. Thank you so much!

One cubic yard covers about 324 square feet at a 1 inch depth, which is the typical range for mortar work, paver joint filling, and pool base prep at 1 to 2 inches. For a standard patio project, most homeowners are looking at a fraction of a yard for joints alone, so measure your square footage first and work backward from there. If you're doing a full pool base at 2 inches, plan on roughly double the coverage per yard.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Saratoga Springs Sand Delivery

Saratoga Springs Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Donna Nedrow
Donna Nedrow
Google Review

Great service. We ordered topsoil from Mulch Mound and the best experience. Thank you so much!

One cubic yard covers about 324 square feet at a 1 inch depth, which is the typical range for mortar work, paver joint filling, and pool base prep at 1 to 2 inches. For a standard patio project, most homeowners are looking at a fraction of a yard for joints alone, so measure your square footage first and work backward from there. If you're doing a full pool base at 2 inches, plan on roughly double the coverage per yard.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Saratoga Springs Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Jana Ozanich
Jana Ozanich

One of the easiest customer service experiences I've had in a long time! Mulch Mound made it so simple. After putting it off for a while, I looked ...

Read full review

One of the easiest customer service experiences I've had in a long time! Mulch Mound made it so simple. After putting it off for a while, I looked at the weather and knew I needed to get to mulching ASAP before the rain came if I didn't want to wait another week. I put my order in for the next day online and they came right at 9 AM. The employee who dropped off the mulch did a great job, putting it right on the tarp I laid out, she even made sure none of it got on the yard and double checked the truck bed to make sure it all came out. The mulch was exactly what I needed and arrived right on time.

Google Review
Michelle Cooper
Michelle Cooper

We have always spread our own mulch for the past 24 years. This was our first time with the Mulch Mound - things I liked: they have online ordering...

Read full review

We have always spread our own mulch for the past 24 years. This was our first time with the Mulch Mound - things I liked: they have online ordering and provide a digital receipt which means you can remember how much you ordered (I always forget for the next year!), they were on time, they were able to deliver in 48 hours, they were generous with the portion (we got 9 yards and it felt like a FULL nine yards!), the driver was polite! We have ordered from reputable places, and there is always a little trash in the mulch. The mulch we recv'd from Mulch Mound had barely any... we were pleasant surprised!!! Color was great! Not to mention - the price was competitive and LOWER than other mulch places around. We will use again !! Highly recommend! Thanks Mulch Mound!

Google Review

Complete Your Outdoor Project

Most jobs using this sand also need paver base or crushed stone underneath for a stable foundation, and gravel for drainage if the site holds water. If you're mixing mortar on site, you'll also want portland cement on hand before the load arrives. Some installers are shifting paver bedding over to chip stone since it resists pumping better, worth considering if that's your project.

Saratoga Springs Soil Delivery
Saratoga Springs Mulch Delivery
Map of the sand delivery area around Saratoga Springs, New York

Service area

Areas we deliver sand in Saratoga Springs, New York

See All Locations
Mulch Mound Pro Tip

For paver joints, sweep the sand in dry and compact with a plate tamper before any water hits it, then repeat once or twice since the first pass always settles lower than it looks. In Saratoga's freeze thaw cycle, joints that aren't fully packed will open up gaps by the second winter. Don't rush this step even though it feels done after one pass.

Mulch Mound Pro Tip

A common mistake is mixing mortar sand with concrete sand thinking they're interchangeable, they aren't. Mortar sand is finer and more uniform, which is exactly what gives mortar its workability under a trowel. Using coarser material makes the mix gritty and harder to spread evenly, especially noticeable on brick and stone veneer work where a clean joint line matters.

Mulch Mound Pro Tip

If you're bedding pavers, consider clean chip stone instead of sand under the base course, since sand has a tendency to pump up through joints over time as water moves through it, especially in a soil profile like Saratoga's sandy loam that drains fast. Sand still has its place for the joint fill itself, just not always as the structural bed underneath.

Working With Sand in Saratoga Springs

Saratoga Springs sits on sandy loam already, so drainage is rarely the issue, but that native soil is too coarse and inconsistent for mortar work or precise paver joints. This sand is washed and screened to a uniform grain size, which is what actually makes mortar workable and joints pack tight instead of washing out. With frost heaving a real concern here given the winters, a properly bedded paver base matters more than it does in milder climates. Pool installers around the Spa City also lean on it for a smooth, stable base under liners.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as what people call mason sand?

Yes, mason sand and the washed, finely screened sand we deliver are the same product, just different regional names. It's the finer, more uniform sand used for mortar mixing and paver joints, as opposed to coarser concrete sand or bedding sand.

Answer

How much sand do I need for a patio's paver joints?

For joint filling alone, one cubic yard covers a large area since you're only filling narrow gaps, not the whole surface. As a rough guide, one yard at a 1 inch depth covers about 324 square feet, but joints use a fraction of that depth across your total patio footprint, so most homeowners need well under a full yard.

Answer

When is the best time to install this in Saratoga Springs?

Spring through fall is when most hardscape work happens here, once the ground has thawed and dried out after last frost around May 10. Working sand into joints or mortar in freezing temperatures is a problem since moisture in the mix can freeze before it sets properly.

Answer

Where will the sand be placed on my property?

The driver drops the load wherever you specify at checkout, typically a driveway or a spot near your work area since sand is dense and hard to move long distances by hand. Make sure that space is clear and accessible before your scheduled delivery.

Answer

Should I use sand or chip stone under my pavers?

Many installers are moving away from sand as a paver base in favor of clean chip stone, since chip stone resists pumping through joints over time better than sand does. Sand still works well for the actual joint fill on top, it's really the base layer where chip stone has become the preferred choice.

More delivery around Saratoga Springs, New York

All Saratoga Springs, New York landscape supply