• Vineland NJ Sand Delivery - Mulch Mound
  • Vineland NJ Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, which is the typical install depth for joint fill and bedding work. For most residential paver patios or walkways, figure out your square footage first, then decide if you need a 1 inch or 2 inch layer depending on the application. Mortar mixing jobs use less volume overall, so measure your batch needs rather than your footprint.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Vineland Sand Delivery

Vineland Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, which is the typical install depth for joint fill and bedding work. For most residential paver patios or walkways, figure out your square footage first, then decide if you need a 1 inch or 2 inch layer depending on the application. Mortar mixing jobs use less volume overall, so measure your batch needs rather than your footprint.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Vineland Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review

Complete Your Outdoor Project

Paver base and paver joint sand are the classic pairing, though a lot of Vineland hardscapers are switching to chip stone for bedding since it does not pump out over time. If you're building forms or setting a base course before the sand layer, crushed stone or gravel is worth ordering in the same delivery. For mortar work, you'll also want to line up your masonry cement separately.

Vineland Soil Delivery
Vineland Mulch Delivery
Map of the sand delivery area around Vineland, New Jersey

Service area

Areas we deliver sand in Vineland, New Jersey

See All Locations
Mulch Mound Pro Tip

Mason sand only holds a mortar joint together if it's kept dry until mixing, which matters in a place like Vineland where fall and spring bring regular rain. Tarp the pile if it's going to sit more than a day or two before you use it. Wet sand throws off your water to cement ratio and weakens the bond, especially on pool coping and veneer work where consistency actually shows.

Mulch Mound Pro Tip

A lot of guys still spec mason sand under pavers out of habit, but it's being phased out for bedding because it can wash out under joints during heavy rain and lead to pumping or settling. If your project is a paver patio bed rather than joint fill or mortar, ask about chip stone instead, it locks in place and does not migrate the way sand does over a wet Jersey winter.

Mulch Mound Pro Tip

Buying the exact yardage you need in one delivery beats making multiple runs in a pickup bed, especially with Vineland's spring and fall hardscape rush booking up contractors and suppliers alike. Order a little extra, maybe 10 percent over your calculated need, since running short mid-mortar-batch on a Saturday is a bigger problem than having a few unused bags left over.

Working With Sand in Vineland

Vineland already sits on sandy loam, so drainage is rarely the issue here, but that native soil is too coarse and inconsistent for mortar or paver joints. Masons and hardscapers around town bring in washed mason sand specifically because it is finer and more uniform than what you'd screen out of a yard here. With Parvin State Park and a lot of rural acreage nearby, plenty of local jobs are patios, walkways, and pool decks that need a clean, predictable base material rather than whatever is under the topsoil.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand or something different?

Yes, this is mason sand, sometimes just called washed sand depending on the supplier. It is washed and finely screened, which is what makes it fine and uniform enough for mortar mixing, paver joints, and pool base work rather than general fill or drainage projects.

Answer

How many cubic yards do I need for a paver patio's joints?

One cubic yard covers roughly 324 square feet at a 1 inch depth, but joint filling uses far less volume than that since you're only filling the gaps, not the whole surface. For most patios, a quarter to half a yard covers joint fill, while base bedding at 1 to 2 inches needs more depending on your total square footage.

Answer

When is the best time to schedule a hardscape project in Vineland?

Spring through fall is peak hardscape season here, once the ground has fully thawed after the last frost around April 15 and before things slow down heading into the November frost. Working in this window means the base compacts properly and the sand isn't fighting freeze-thaw cycles while you're setting pavers or pouring mortar.

Answer

Where will the sand pile be placed on my property?

The driver places it at the spot you specify at checkout, typically a driveway or the flattest, most accessible point near your work area. Clear the space beforehand and keep in mind a cubic yard of sand is heavy, close to 1.35 tons, so avoid soft lawn or areas you don't want compacted.

Answer

Should I use this sand or chip stone under my pavers?

For paver bedding specifically, many contractors are moving away from mason sand toward chip stone because it locks together and resists pumping or washout over time. Mason sand is still the right call for mortar mixing and filling paver joints, it's just being replaced for the base layer itself on newer installs.

More delivery around Vineland, New Jersey

All Vineland, New Jersey landscape supply