About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

At a 1 inch install depth, one cubic yard covers about 324 square feet, so a small paver patio or a mortar mixing job usually only needs a fraction of a yard. For paver joint filling or pool base leveling at 1 to 2 inches, figure your square footage and divide by 324, then adjust for the thicker end of that range if your base needs more buildup.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Arroyo Grande Sand Delivery

Arroyo Grande Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

At a 1 inch install depth, one cubic yard covers about 324 square feet, so a small paver patio or a mortar mixing job usually only needs a fraction of a yard. For paver joint filling or pool base leveling at 1 to 2 inches, figure your square footage and divide by 324, then adjust for the thicker end of that range if your base needs more buildup.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Arroyo Grande Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most sand orders here get paired with paver base or road base for the structural layer underneath, and sometimes with polymeric jointing sand for the finish work on top. If you are mixing mortar for a retaining wall or planter near the creek, having cement and washed gravel on site at the same time keeps the crew from stopping mid pour.

Mulch Mound Pro Tip

For mortar mixing, keep this sand as dry as possible before use since Arroyo Grande's coastal moisture can dampen a stockpile faster than inland areas. Damp sand throws off your water to cement ratio and makes mortar workability inconsistent from batch to batch. Cover your pile with a tarp overnight, especially if fog rolls in off the coast, and always test a small batch before mixing a full run for a wall or patio job.

Mulch Mound Pro Tip

A common mistake with mason sand is using it as paver bedding on sandy loam soil, since the loose grain doesn't lock together well and can migrate under heavy foot traffic or vehicle weight. If you are setting pavers for a driveway or patio, chip stone bedding holds its shape better here and won't wash out the way sand can on a lot with any slope toward the creek.

Mulch Mound Pro Tip

If your project spans several weekends, like repointing an older Village home's brick, order a bit more mason sand than the calculator suggests. Sand left over from mortar work is easy to store dry under a tarp and reuse for joint filling or small patch jobs later, so a slightly oversized single delivery beats paying for two separate trips.

Working With Sand in Arroyo Grande

Arroyo Grande sits on sandy loam already, so this material is not fighting the native ground the way it might in a heavy clay town. That makes it a natural fit for paver base leveling and mortar work on patios near the Swinging Bridge area and throughout the Village where a lot of homes have older masonry that needs repointing. With mild winters and a late first frost around December 20, there is a long working window for hardscape jobs before conditions turn wet. Just keep in mind loose sand on sloped lots near the creek can wash if it is not compacted or covered promptly.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is mason sand actually used for on a typical Arroyo Grande project?

It is mainly used for mixing mortar, filling paver joints, and building pool bases. It is finer and more uniform than concrete sand, which is what makes mortar workable for repointing brick or building a small retaining wall. It is less common now as paver bedding since chip stone handles that job without shifting.

Answer

How much sand do I need for a small patio or paver project?

One cubic yard covers about 324 square feet at a 1 inch depth. Measure your square footage, decide whether you need 1 or 2 inches, and divide accordingly. Most residential paver joint or mortar mixing jobs only need a partial yard, so measure before you order to avoid excess leftover material.

Answer

When is the best time to schedule a hardscape project using this sand?

Spring through fall is the busiest and most practical stretch since the ground is dry and workable. With a mild climate and first frost not until December 20, you have a wide window, but avoid scheduling mortar work right after a rare rain since damp conditions slow curing and complicate mixing ratios.

Answer

Where will the sand be placed when it is delivered?

The load is dumped at a flat, accessible spot on your property that you choose ahead of time, typically a driveway or curbside area. Delivery is scheduled at checkout, and it helps to clear the space and lay down a tarp if you want to keep a paved surface clean.

Answer

Should I use mason sand or chip stone for my paver base?

For paver bedding, chip stone is increasingly preferred over sand because it locks together and resists shifting or washing out, especially on sloped lots. Mason sand is still the right choice for mortar mixing, joint filling, and pool base work where a fine, uniform grain matters more than interlock.

More delivery around Arroyo Grande, California

All Arroyo Grande, California landscape supply